WorksheetsTEX 02 Safety & Machines (final)
Total questions: 26
Worksheet time: 32mins
Which sewing machine part is responsible for moving the fabric backward during stitching?
(a)Which part of the sewing machine must be aligned for the presser foot to operate correctly?
(a)
What direction should you turn the hand wheel to draw up the bobbin thread?
(a)
How many inches of thread should be left on top and bottom after threading the machine?
(a)
What does the sewing machine bobbin provide for the stitching process?
(a)
What is the main function of the presser foot in a sewing machine?
To hold the fabric in place while sewing
To wind the bobbin
To provide power to the sewing machine
To guide the thread into the needle
What is the primary reason for skipped stitches in a sewing machine?
Using a needle that is bent or dull
Threading the machine with invisible thread
Operating the machine without fabric
Using a sewing machine without plugging it in
In which direction do the feed dogs move the fabric while sewing?
They move the fabric forward.
They move the fabric backward.
They move the fabric sideways.
They do not move the fabric at all.
Which part of the sewing machine controls the amount of thread released from the spool?
The hand wheel
The tension dial
The bobbin case
The feed dogs
Why is it important to wind the bobbin evenly?
To prevent the machine from overheating
To ensure smooth stitching without thread tangling
To reduce noise during sewing
To make the needle move faster
What happens if the top thread is not securely placed under the spool holder?
The thread might tangle or come loose during sewing
The fabric will not feed properly
The needle will break
The presser foot will not function
What should you do if the bobbin thread is not being drawn up correctly?
Check if the bobbin is placed correctly
Adjust the presser foot
Change the needle size
Increase the thread tension
What is the purpose of leaving extra thread on the top and bobbin after threading?
To adjust the thread tension
To prevent the thread from pulling out of the needle or bobbin
To make the fabric move faster
To secure the presser foot
Why is it important to use the correct type of needle for different fabrics when sewing? Provide an example to support your answer.
Explain the importance of threading the sewing machine correctly and describe the potential problems caused by improper threading.
Discuss the potential dangers of using a sewing machine or serger without following proper safety guidelines and how these dangers can be mitigated.
Describe how misuse of fabric shears and embroidery scissors can affect their functionality and the safety of the user.
Explain why it is important to store sewing needles and pins properly and how improper storage might impact safety and efficiency in the classroom.
How can you avoid injury when using sewing needles?
Store them in a needle case or pin cushion.
Use them only on thick fabric.
Keep them on the table when not in use.
Hold them by the sharp point.
What is the primary safety measure to follow when using fabric shears?
Store them in a secure place.
Use them only for cutting fabric.
Keep the blades open for quick use.
Test their sharpness frequently.
What should you do before making adjustments to a sewing machine?
Turn off the sewing machine
Remove the thread
Unplug other machines nearby
Hold the needle with your hand
Why is it important to fully retract a retractable extension cord after use?
To avoid overheating
To prevent tangling or accidental retraction
To ensure it stays clean
To avoid damaging the cord’s surface
Which tool should you use to remove unwanted stitches without damaging the fabric?
Fabric Shears
Stitch Ripper
Embroidery Scissors
Sewing Needles
Which tool designed for sewing has a sharp point and an eye for threading?
(a)
