WorksheetsWeek 8 Review
Total questions: 35
Worksheet time: 45mins
______ lines are evenly spaced short lines that represent hidden edges or contours.
Hidden
Phantom
Viewing Plane
Cutting Plane
Extension
______ lines are used to indicate the point or line to which the dimension applies.
Hidden
Phantom
Center
Dimension
Extension
Line Type
Phantom
Hidden
Center
Dimension
Which diagram below shows the right view of this object?
Which drawing below shows the Top View?
The standard 3 views are top, front, & left.
True
False
What Alphabet of Line is illustrated in the image?
(a)
Which orthographic view is the arrow pointing to? Be sure to pay close attention to the direction of the arrow.
Which orthographic view is the arrow pointing to? Be sure to pay close attention to the direction of the arrow.
Which orthographic view is the arrow pointing to? Be sure to pay close attention to the direction of the arrow.
The six possible 2d projections of a 3d object are called this
orthographic views
photographic
pictorial
technical
What is the top view?
What type of line is this?
phantom
hidden
cuttin plane
center
Details are section drawings that
have been zoomed in so that you can see something specific, and can contain notes and/or dimensions.
are drawn from farther away so that you can see the entire structure being made.
are only shown from a top down view and do not show height.
are always done in crayon to make them easy to understand.
From Denver to Chicago = 3 in. If the scale is 1 in = 300 miles, find the actual distance.
300 miles
1000 miles
900 miles
600 miles
What type of line is this?
hidden
cutting plane
section
extension
What is NOT shown in a floor plan?
objects like furniture and windows
interior (inside) walls
the relationship between rooms, spaces and physical features viewed from above
the height of any ceiling, door, or window
Kenny drew a scale drawing of a swimming pool.
The scale of the drawing was 2 cm : 1 m. If the pool is 26 cm in the drawing, how long is the actual pool?
13 m
3 m
52 m
24 m
What is an elevation drawing?
A drawing that shows only the top of a structure.
A zoomed in view, usually shown at 3"=1' scale.
A drawing that shows the front or side of an object or structure.
A drawing that can show things on the outside of a building like doors, but never things on the inside like cabinets.
On a map, the distance between Louisville, Kentucky, and Nashville, Tennessee, is 1 3/4 inches. The scale of the map is 1 in:100 mi. What is the actual distance between the two cities?
200 miles
100 miles
175 miles
1250 miles
Match the following view type with the average scale:
Floor Plans
1/8"=1'0"
Elevations
1/2" or 1/4" = 1'0"
Sections
1 1/2" = 1'0" (1.5" = 1'0")
Detail
3"=1'0"
A section view is a slice through an object or space which shows the inside features.
That's true!
No way! That ain't true! That's false!
Someone's probably going to click this one, even though it isn't even an answer.
I like the color red
Why is it necessary to scale the size of a building when creating a drawing?
To fit the drawing on a sheet of paper
To make the building look bigger
To change the building's design
To improve the building's stability
A model ship is 30cm long and the actual ship is 150m long. What is the scale?
Set it up as a ratio in a fraction then simplify - 30/150.
1cm:5m
1cm:3m
1cm:50m
1cm:150m
A model ship is 30cm long and the actual ship is 150m long. What is the scale?
Set it up as a ratio in a fraction then simplify - 30/150.
1cm:5m
1cm:3m
1cm:50m
1cm:150m
