WorksheetsObjective
Total questions: 47
Worksheet time: 24mins
Describe the types of attachments and how they extend a forklift’s capabilities.
Attachments such as side shifters, fork positioners, and rotators enhance a forklift's versatility by allowing it to handle different types of loads and perform various functions.
Attachments are not used with forklifts.
Attachments reduce the efficiency of forklifts.
Attachments are only used for aesthetic purposes.
Explain why the use of any attachment introduces new hazards and safety risks.
Attachments can alter the center of gravity, leading to instability.
Attachments are always safe and do not introduce any risks.
Attachments reduce the efficiency of the equipment.
Attachments are designed to eliminate all hazards.
Under the supervision of an instructor, trainees should be able to do the following: Interpret forklift load charts used with attachments. Explain how you would interpret these charts.
By understanding the weight limits and balance points for different attachments.
By memorizing the entire chart without understanding.
By ignoring the chart and relying on experience.
By asking a colleague to interpret it for you.
What can specialized attachments be used for on conventional forklifts?
To perform a variety of different jobs
To increase speed
To reduce noise
To enhance safety
Will you be lifting odd-shaped loads? Loads that are long or asymmetrical may require the use of specialized forks, a boom, lifting clamp attachments, etc.
Yes
No
Will you need to reach out to lift the load? The vertical mast on a conventional forklift does not extend like a boom-type forklift. Ensure that the attachment allows you to perform this function if necessary.
Yes
No
Will the job require you to lift personnel and equipment? The use of personnel platforms brings extra risks to workers, so it is critical to understand precautions that need to be taken in these situations.
Yes
No
The most common attachments for vertical mast forklifts include _________?
Specialized forks
Hydraulic lifts
Pallet jacks
Boom extensions
The most common attachments for vertical mast forklifts include _________.
Paper and barrel clamps
Side shifters
Fork positioners
Rotators
The most common attachments for vertical mast forklifts include _________?
Flat surface clamps
Round surface clamps
Hook attachments
Fork extensions
The most common attachments for vertical mast forklifts include _________?
Extension booms and hooks
Side shifters
Fork positioners
Rotators
The most common attachments for vertical mast forklifts include _________?
Personnel platforms
Side shifters
Fork positioners
Rotators
The most common attachments for vertical mast forklifts include _________.
Floor brooms
Side shifters
Fork positioners
Rotators
The most common attachments for vertical mast forklifts include _________?
Push-Pulls
Side Shifters
Fork Positioners
Rotators
What is the maximum length of specialized forks used for lifting lumber and other large non-symmetrical items?
96 inches
72 inches
84 inches
108 inches
Which of the following features is true about some models of specialized forks?
They are only 50 inches long.
They cannot be adjusted wider.
They can be adjusted wider.
They are used for lifting small items.
What do barrel clamps use to clamp a roll or barrel?
One hydraulic arm
Two hydraulic arms
Three hydraulic arms
Four hydraulic arms
Barrel clamp attachments can handle multiple rolls or barrels at a time by:
using hydraulic systems to adjust the grip
employing manual labor for adjustments
utilizing magnetic fields for holding
relying on gravity to keep them in place
Why are appliances often loaded and shipped without pallets?
Using standard forks to load or unload them can damage the box or appliance.
It is more cost-effective to ship without pallets.
Pallets are not environmentally friendly.
Appliances are too heavy for pallets.
What is the advantage of using flat surface clamps when loading appliances?
They grasp the load by the sides.
They are more expensive.
They require more manpower.
They are less stable.
What do extension booms and lifting hooks allow a conventional forklift to do?
Work like a small crane with loads that must be lifted from the top.
Move faster than standard forklifts.
Carry more weight than its rated capacity.
Operate without a driver.
Boom extensions can be either (a) or adjustable angle.
fixed angle
rotating angle
sliding angle
The operator must understand how to use the (a) .
load chart
speedometer
fuel gauge
The machine’s lifting capacity changes based on its (a) and angle from the load.
distance
weight
height
What is the advantage of adjustable-angle booms?
They are lighter in weight
They are excellent for loads lifted on varying elevation angles
They are cheaper
They require less maintenance
Why must the weight of the extension boom be considered when determining the total weight that the forklift can handle?
The weight of the extension boom must be considered to ensure the forklift can handle the total weight safely.
The weight of the extension boom is irrelevant to the forklift's capacity.
The extension boom's weight is always negligible.
The forklift's capacity is only determined by the load weight.
The closer the load is to the boom’s base, the more load the boom can ____.
lift
push
pull
carry
What must personnel platforms adhere to?
OSHA 1926.451
ISO 9001
ANSI 2020
NFPA 70
Where can personnel platforms be used?
On any forklift
Only on forklifts designed to support them
On trucks
On cranes
What equipment must personnel use on platforms?
Hard hats
Personal fall protection equipment (PPE)
Safety glasses
Ear plugs
What must be done before lifting personnel on a platform?
Check tire pressure
Securely attach the platform to the forks
Fill the fuel tank
Test the horn
What must forklift operators never do with workers on the platform?
Travel
Communicate
Eat
Sleep
What must be confirmed before lifting workers?
Weather conditions
Overhead clearance
Battery level
Load weight
What is a floor broom or powered broom?
A large broom head that can be attached to the forks.
A small handheld vacuum cleaner.
A type of mop used for wet cleaning.
An electric sweeper for carpets.
Operators can use broom attachments to clean which of the following areas?
Parking lots
Industrial plants
Warehouses
All of the above
Which of the following is NOT mentioned as an attachment type?
Slip sheets
Bale clamps
Carton clamps
Hydraulic lifts
What are Barrel Clamps?
Attachments that use two hydraulic arms to clamp a roll or barrel and safely transport it to the desired location.
Devices used to measure the diameter of a barrel.
Tools for opening and closing barrel lids.
Instruments for weighing barrels.
What are Extension Booms?
Attachments that allow the conventional forklift to work like a small crane.
A type of hydraulic lift used in construction.
A component of a car engine that boosts performance.
A type of fishing equipment used in deep-sea fishing.
What are Flat Surface Clamps?
Attachments used to move loads that are flat sided or rectangular.
Tools used for cutting flat surfaces.
Devices for measuring flatness of surfaces.
Instruments for polishing flat surfaces.
What are Floor Brooms?
Large broom heads that can be attached to the forks to clean parking lots, industrial plants, warehouses, mill yards, or any large area where the floor or ground is smooth and level.
Small handheld brushes used for cleaning delicate surfaces.
Electric devices used for vacuuming carpets.
Tools used for painting walls.
What is a Load Chart used for?
To determine the forklift’s lifting capacity
To provide an elevated work station
To work with loads stacked on slip sheets
To lift lumber and other large items
What do Personnel Platforms provide?
An elevated work station
A way to work with loads on slip sheets
Forks for lifting lumber
A chart for lifting capacity
What are Push-Pulls used for?
To work with loads stacked on slip sheets
To determine lifting capacity
To provide an elevated work station
To lift lumber and other large items
What are Specialized Forks used for?
Lifting lumber and other large items
Providing an elevated work station
Working with loads on slip sheets
Determining lifting capacity
Which of the following is a forklift attachment?
Carriage
Extension boom
Load backrest
Counterweight
Which of the following is a forklift attachment?
Carriage
Extension boom
Load backrest
Counterweight
What load factors should be considered when determining whether a forklift attachment is needed?
Cost of the load
Shape of the load
Height the load will be lifted
How the load will be shipped
