Sarah notices on the cutting layout that her pocket pattern piece is shaded. What does this indicate?

Tom needs his body measurements to order a custom suit. What should he wear to get the most accurate body measurements?

Miranda is looking at her guidesheet to see which pattern pieces she needs to construct her garment. The section that will show her what pattern pieces she needs is:

Sarah is making her first garment. Which section of the guidesheet will show her the different garments that are available in the pattern?

Which area of a garment indicates poor fit, when there is gapping between the buttons on a blouse?

Sarah is making a pair of shorts. Where will she locate the number of pocket pieces she will need to cut from her fabric?

A pattern that includes many sizes in one envelope is considered which type of pattern?

Myra is placing her pattern pieces on the fabric, which piece should be placed first?

Pajama pant patterns that are designed for both men and women are considered to be:

Susan is ready to attach her pattern to her fabric. Where should her pins be placed?

On the cutting layout, pattern pieces may be shaded. What does this indicate?

Added fullness, beyond wearing ease, that is incorporated by a designer to create a particular silhouette or shape is known as:

Sally is measuring around the smallest part of her torso. Which body measurement is this?

When a designer creates a pattern, what is added to ensure comfort and moveability?

Brianna wants to quickly complete the construction of her knit skirt. She chose to use a serger because it performs all of these steps at the same time?

An important safety rule for both the sewing machine and serger is:

Which small measuring tool with a sliding marker should Morgan use to measure the amount of fabric to turn up for a hem?

Austin needed to iron his dress pants before going to work. When he placed the iron onto his pants, the fabric melted. What pressing equipment should he use in the future to prevent this from happening?

Stitching with proper sewing machine tension should result in:

Which perfectly timed machine part moves fabric through the sewing machine?

Kelsey needs to press the darts on her blouse. Which tool should she use?

The proper way to end a serged seam is to:

Xavier broke the needle in his sewing machine. To replace it, he first needs to loosen the needle:

Haley is topstitching the hem of her jeans. She is completing the hem by:

Seams in sheer fabric can often be seen through the garment. Which seam would be best to create a finished look?

Jamie needs to strengthen the corners of his pillow so they will not break open when turned and stuffed. Which stitches should be used?

Misty made a stuffed owl in her apparel class. After stitching the front to the back, she turned the owl right sides out. The seam at the inward curve looked very puckered. What technique should she use to make the seam stretch and flatten out?

The apparel development teacher advised Joe to hem the bottom of his dress shirt with a:

Stitch before sewing seams solves this problem?

The quickest, easiest way to temporarily fix a hem would be to:

When choosing interfacing, it should be:

Which special seam is used for strength and decoration on nearly all jeans and denim clothing?

Tina needs to baste two fabric pieces together to apply a zipper. Which stitch length setting should be used?

Sue is hemming her son’s pants with a slipstitch. She is completing this hem by:

Megan was sewing a rounded collar. Which technique should she use on the outward curve to help the seam lay flat when turned right-side out?

When hemming the length of a formal dress, it is important to wear:

Savannah is sewing a ruffle down the front of her top. The pattern piece for the ruffle is much longer than the piece it joins. What technique will she use to control the extra fullness in the ruffle?

What technique should be used to control the extra fullness and sew two pieces of fabric together that are slightly different sizes?

Josh was adding a fastener to his shirt. Using double thread, he stitched the button on over a heavy pin and created a thread shank. What type of fastener did he use?

The seam of a blanket made of thick fabric will not press flat. What technique should be used to taper the seam allowance and reduce the bulk?

Casey was attempting to finish the seams of her pajama pants when the serger threads broke. She does not have time to rethread the serger. How can she finish the seams on a regular sewing machine?

She is using a fastener that has two parts that interlock. Which type of fastener is she using?

When stitching a facing to a skirt, which stitch will prevent the facing from rolling to the outside of the garment?

Tina is slip stitching the hem of her skirt. This stitch should be completed with a:

When stitching a standard seam on a sewing machine, what stitch length setting should be used?

Austin wants to construct a pair of pajama pants. Which body measurements should he use to determinene his pattern size?

The sewing machine needle should be disengaged when:

Karen basted the interfacing to her outer fabric with a 1/2" seam allowance. Which type of interfacing did she use?

In order to control fullness at the waistline of a pair of shorts using a piece of elastic, which technique should be used?

Mary finished stitching her sqaure pin cushion. Before turning it right sides out, what should she do to reduce bulk in the corners?

Tonya is attaching interfacing to her tote bag project using the iron. Which typ of interfacing is she using?

A small coin wallet bought at a craft fair is not holding up well. The seams are pulling apart at the ends. Which stitches should be used to prevent this problem?