The device used to fetch (or bring) instructions and data into a computer system is called

The instruction, Add #45,R1 does _______

The addressing mode/s, which uses the PC instead of a general purpose register is ______

In CISC architecture most of the complex instructions are stored in _____

________ are the different type/s of generating control signals.

What is the full form of ISA?

During a write operation if the required block is not present in the cache then ______ occurs.

The bit used to indicate whether the block was recently used or not is _______

The techniques which move the program blocks to or from the physical memory is called as ______

______ translates the logical address into a physical address.

Each stage in pipelining should be completed within ___________ cycle.

The situation wherein the data of operands are not available is called ______

The DMA transfers are performed by a control circuit called as __________

After the completion of the DMA transfer, the processor is notified by __________

_____ BUS arbitration approach uses the involvement of the processor.

The key features of the SCSI BUS are _________

The BSY signal signifies _________

The sampling process in speaker output is a ________ process.

The I/O devices form the _____ of the tree structure.

____________ retrieves the data from the storage unit and performs the arithmetic calculations and/or comparisons on them and the processed data is then sent back to the storage.

___________ coordinates with the peripheral devices to accept the input or display the output.

__________ is a chip-based computer component that makes retrieving data from the computer’s memory more efficient.

The main components (or basic units) of a computer system are

To store the intermediate results the ALU takes help from:

Where does the decoded instruction is stored in?

Which gets initialized first during the execution of a program?

ISR Stands for

The ___________ informs the CPU about the location of the data residing in the memory.

A register that keeps track of the next instruction to be executed is called a _____________