WorksheetsShop Safety Guidelines
Total questions: 20
Worksheet time: 10mins
Wood should be placed against the fence before cutting.
The fence
The wall
The ground
The tree
Never distract machine operators.
Always keep them focused.
Never distract them
Encourage them to take breaks.
Provide them with entertainment.
Action before leaving a running machine
Turn it off and wait for it to stop
Leave it running to save time
Check for any leaks before leaving
Increase the speed for efficiency
Requirement before operating any equipment
Pass a safety test and have the instructor present
Complete a training course only
Have prior experience with similar equipment
Obtain a written permission from a supervisor
Reason spills should be cleaned up immediately
To prevent slipping or fire hazards
To enhance the aesthetic appeal of the area
To allow for better air circulation
To reduce the need for cleaning supplies
First action in an emergency with a power tool
Turn off the power
Call for help
Inspect the tool for damage
Continue using the tool
Safety guards must be in place always before operation.
Always before operation
Only during maintenance
After the operation is complete
Whenever convenient
Where sharp tools should not be left
Sticking out from benches
Hidden in drawers
On the floor
In a toolbox
Safest type of clothing in the shop
Proper-fitting, tucked in, no loose items
Loose-fitting clothing that allows for movement
Brightly colored clothing for visibility
Heavy-duty clothing for protection
How to carry long ladders
By one person
By two people
By three people
By using a vehicle
Knots and nails are dangerous in a planer because they can fly out.
They can fly out
They can cause the wood to splinter
They can make the planer jam
They can dull the blades
Handling flammable liquids
Read the label or ask the teacher before use
Use any container available
Mix with water to dilute
Store in a non-flammable area
Reason chisels should be sharp
To prevent slips and injury
To make them look more appealing
To increase their weight
To reduce the cost of manufacturing
How to carry tools when climbing a ladder?
In a tool belt
In a backpack
In your hands
On your head
Preparation for fire safety in the shop
Know extinguisher locations, shutoffs, and follow instructions
Ensure all employees are trained in first aid
Install smoke detectors in every corner
Keep flammable materials in the open
Remove chips from the drill press with a brush.
Maintenance tip for drill press operation.
Use water to cool the drill bit.
Always wear gloves while operating the drill press.
Check the drill bit for wear before use.
What to check before using a tool handle
Loose fit, no cracks
Tight fit, no cracks
Cracked handle, loose fit
Tight fit, visible wear
Stand to the side of the blade path when using a circular saw.
In front of the blade path
To the side of the blade path
Behind the blade path
Directly above the blade path
Feed material into a jigsaw slowly.
Quickly
Moderately
Slowly
Carelessly
Action to take if an object is too heavy to lift alone
Lift it with all your strength
Get help from another person
Use a pulley system
Leave it where it is
