NEW
Font size
WorksheetsDAY 22 WORKSHEET KWA (09/10)Building RULES & BYELAW and Bearing
Total questions: 15
Worksheet time: 8mins
The contact between bearing surfaces in a rolling contact bearing is __________.
Sliding
Rolling
Scraping
Static
Which one of the following is not an advantage of rolling contact bearings?
Low starting friction
Simple housing design
Low maintenance cost
Reliability of service
Angular contact ball bearings can carry __________.
Only radial load
Only axial load
Combined axial and radial load
Vibratory load
The height of a building is measured from __________.
Basement level to roof
Average ground level to terrace of top floor
Foundation to roof
Street level to plinth
As per KMBR, the site plan shall be drawn to a scale of not less than ________.
1: 100
1: 200
1: 400
1: 800
The maximum height of a building shall not exceed ________ times the width of the road abutting plus front open space.
1.5
2
2.5
3
The clear vertical distance from finished floor to ceiling is called ________.
Plinth height
Head room
Storey height
Room height
According to NBC, Residential buildings are classified under Group ________.
B
A
D
E
A building used for medical or hospital purposes is classified as Group ________ building.
C
B
E
D
The term “aspect” in planning refers to ________.
Beauty of building elevation
Orientation with respect to north
Arrangement for admitting sunlight and air
Shape of roof
The term “circulation” in building planning means ________.
Provision of drainage system
Link between rooms and floors
Arrangement of furniture
Movement of air
For good orientation in India, the long walls of a building should be placed towards ________ and ________.
East and West
North and South
Northeast and Southwest
West and South
Projections like balconies and verandahs should preferably be provided on the ________ and ________ sides of the building to keep rooms cool.
East and West
North and South
Northeast and Northwest
South and West
Match the types of bearings with their features:
A–3, B–1, C–2, D–4
A–2, B–1, C–3, D–4
A–4, B–1, C–3, D–2
A–1, B–2, C–3, D–4
Match the building group with its use classification:
A–1, B–2, C–3, D–4
A–2, B–1, C–3, D–4
A–2, B–1, C–4, D–3
A–3, B–1, C–4, D–2
