Font size
Worksheetssecond quarter review
Total questions: 75
Worksheet time: 38mins
What is the process of adding value to create the illusion of form and light in a drawing?
Sketching
Shading
Lining
Outlining
2D drawing has two dimensions: height and ____?
Depth
Width
Length
Area
When we draw in 3D, we add the dimension called ____?
Height
Width
Depth
Angle
The part of the subject directly facing the light source is the ____?
Shadow
Highlight
Core shadow
Mid-tone
The side of the object neither in light nor in shadow is called ____?
Shadow
Highlight
Mid-tone
Core shadow
A cube is made up of six ____ faces.
Circular
Triangular
Rectangular
Square
The darkest part of the object where no light can reach is the ____?
Mid-tone
Core shadow
Cast shadow
Highlight
The shaded area created when light is blocked by an object is the ____?
Core shadow
Cast shadow
The part of the object that faces away from the light is the ____?
Highlight
Shadow
Mid-tone
Outline
Which tool helps in blending pencil shading smoothly?
Eraser
Cotton
Ruler
Sharpener
Shading starts from the ____ part to the darkest.
Middle
Lightest
Shadowed
Edged
In geometry, a sphere is a 3D object shaped like a ____?
Cube
Ball
Cone
Box
The light source should be considered to determine the correct ____?
Line
Dimension
Shading
Shape
What do you call a 3D solid bounded by six equal squares?
Sphere
Cube
Prism
Cylinder
Which of the following best describes "mid-tone"?
Between shadow and highlight
Lightest part
Darkest part
Unshaded part
Why are safety procedures in drawing important?
To finish fast
To keep work safe and clean
To use expensive materials
To impress others
Which of the following should NOT be done while drawing?
Eating
Wearing apron
Cleaning tools
Washing hands
Which material can be toxic when inhaled or ingested?
Graphite
Ink with solvent
Dustless chalk
Paper
The acronym REACT in fire safety means “Remove, Ensure, Activate, Call, and ____.”
Try
Take
Turn
Test
Fire extinguishers are used to ____?
Signal alarm
Store materials
Put out fire
Detect gas
If you smell an unusual odor, you should ____?
Ignore it
Call MDRRMO
Close windows
Keep working
Dry drawing media include ____?
Watercolors
Charcoal
Ink
Markers
Which is a safe practice when using charcoal?
Blow the dust
Wear a dust mask
What should you wear to protect your clothes while drawing?
Gloves
Apron
Goggles
Mask
What should be done after every drawing class?
Leave materials
Ignore waste
Clean the area
Store inks open
If chemical spill occurs, what must be done first?
Wait for trained personnel
Clean immediately
Smell the area
Cover with paper
Which route of entry involves toxic vapors?
Inhalation
Ingestion
Skin contact
Evaporation
What should you use when your drawing area is dusty?
Gloves
Dust mask
Apron
Water bottle
In case of fire, what should be activated?
Fire alarm
Telephone
Ventilator
Faucet
Felt markers with fewer toxic solvents contain____?
Xylene
Ethyl alcohol
Isopropyl alcohol
Benzene
Drawing is a form of communication that uses ____?
Words
Sounds
Graphic illustrations
Gestures
Basic shapes include circle, square, triangle, and ____?
Star
Oval
Hexagon
All of the above
Which of the following is a geometric shape?
Line
Circle
Cloud
Tree
To draw accurately, always consider proper ____?
Pressure
Proportion
Color
Background
The first step in drawing a bat using shapes is to ____?
Draw circles
Draw wings
Color it
Add face
Which part should be drawn last when illustrating a bat?
Head
Ears and fangs
Body
Wings
When learning to draw, start by seeing your subject as ____?
Complicated objects
Simple shapes
Lines only
Finished work
The process of combining simple shapes to create figures is called ____?
Deriving
Coloring
What should be considered when using geometric shapes in drawing?
Concepts and guide
Random sketching
Fast strokes
Pressure
What is the purpose of using basic shapes in illustration?
To make drawings accurate and proportioned
To skip measurements
To fill colors
To decorate
Ana needs to draw a portrait of her favorite artist. Some charcoal pigment drops on her paper. What should she do?
Blow it away
Wipe with hand
Use eraser
Use paint brush
Skye is left-handed. How can she keep her drawing clean?
Start from left going right
Start from right going left
Use wet cloth
All of the above
Elena asks Connie to clean kneaded erasers. What should she do?
Rub with cloth
Wash with soap
Stretch and remodel into a ball
Rub on paper
Pablo keeps group drawings. Which should NOT be done?
Keep in moist place
Keep in envelope
Roll up
None of the above
Remy loves to draw. What tip should she follow?
Lay down pencils not in use
Use hand to clean crumbs
Wash eraser
Carry tools carelessly
Which shortcut key is used to copy an object?
Ctrl + X
Ctrl + C
Ctrl + V
Ctrl + Z
What is the shortcut key to paste an object?
Ctrl + P
Ctrl + S
Ctrl + V
Ctrl + N
Which shortcut key is used to undo the last action?
Ctrl + Z
Ctrl + Y
Ctrl + D
Ctrl + F
To save your work, you press ____?
Ctrl + C
Ctrl + O
Ctrl + S
Ctrl + D
What is the shortcut key to create a new document?
Ctrl + O
Ctrl + N
Ctrl + P
Ctrl + A
Which shortcut key is used to select all objects?
Ctrl + A
Ctrl + L
Ctrl + E
Ctrl + G
What is the shortcut key for the Selection Tool (black arrow)?
P
V
A
L
Pathfinder tool
shift ctrl f9
shift ctrl f10
shift ctrl f11
What is the shortcut key for the Pen Tool?
P
B
N
L
Rotate
o
r
l
Ctrl + E
What is a line in the context of art and drawing?
Only a mark left by a tool like a brush or pencil
Only the path of a moving point
A path of a moving point that defines position and direction of design, image or form
Only used to create optical illusions in design
Which line type is used to represent features that can be seen in the current view or outline of an object?
Hidden line
Visible line
Center line
Phantom line
A medium thick line composed of short dashes about 2-3 millimeters long with spaces between dashes about 1-2 millimeters wide describes which type of line?
Center line
Section line
Hidden line
Phantom line
Which line type represents the axis or center of symmetrical shapes?
Center line
Extension line
Dimension line
A series of thin lines spaced evenly at 45 degrees to the horizontal to create a shaded effect is known as:
Extension line
Dimension line
Section line
Phantom line
Which line is a thin line with an arrowhead at one end used to indicate measurements of an object?
Leader line
Extension line
Center line
Dimension line
What line type extends from the outline of an object to a dimension line?
Extension line
Leader line
Phantom line
Center line
A medium thick line consisting of broken and straight lines drawn alternately is called a:
Phantom line
Long-break line
Center line
Short-break line
Which line is used to point to a specific feature or to add a note to a drawing?
Extension line
Leader line
Dimension line
Phantom line
What is the typical thickness of a visible line in technical drawing?
0.1-0.2mm
0.3-0.4mm
0.5-0.6mm
0.7-0.8mm
How many primary functions of lines are there according to the module?
Five
Six
Seven
Eight
Which of the following is NOT one of the primary functions of lines?
To divide or limit an area or space
To define form by edge or contour
To create three-dimensional objects
To produce a grey or tonal gradation
What is the main purpose of the Alphabet of Lines in technical drawing?
To create artistic expressions
To standardize line types for clear communication
To make drawings more colorful
To replace written instructions
Which line type would you use to show where a section has been cut through an object?
Hidden line
Section line
Visible line
Phantom line
What line type shows the alternate positions of movable parts?
Phantom line
Center line
Long-break line
Short-break line
Which line is used to show where a long object has been broken to save space on a drawing?
Center line
Short-break line
Long-break line
Hidden line
Which characteristic best describes a center line?
Thick continuous line
Medium thick dashed line
Thin line with long dashes alternating with short dashes
Thick zigzag line
What is the main difference between a leader line and a dimension line?
A leader line points to a specific feature while a dimension line shows measurements
A leader line is always horizontal while a dimension line can be at any angle
A leader line is thicker than a dimension line
A leader line is always longer than a dimension line
When would you use a short-break line in a technical drawing?
To show hidden features
To indicate where a small portion of material has been removed
To mark the center of a circle
To show dimensions
Which line type is described as "a thin line consisting of two long dashes and a short dash drawn alternately"?
(a)
