WorksheetsPower Tools
Total questions: 20
Worksheet time: 10mins
What portable power tool is used to smooth wood surfaces?
Circular saw.
Drill.
Miter saw.
Sander.
When not in use, a portable belt sander should be laid:
On its side.
On the belt.
On the handle.
Upside down.
Which is the best width blade to cut curves in wood with a band saw?
1/4"
1/2"
3/4"
1"
The depth of cut for a jointer is determined by adjusting the:
Front guard.
Front infeed table.
Rear guard.
Rear outfeed table.
What stationary power tool uses a blade with back and forth motion to cut metal?
Drill press.
Grinder.
Power hacksaw.
Table saw.
Which end of a rough cut board should be put in a planer first?
Either.
Thick.
Thin.
Wide.
A portable electric tool that can be used to make molding, dado cuts, and rabbet cuts is the:
Band saw.
Drill.
Router.
Sander.
What portable power tool is used to make round holes through wood or metal?
Drill.
Grinder.
Miter saw.
Sander.
Where should the bottom saw teeth point on a portable circular saw blade used to cut wood?
Toward the ripping fence.
Toward center of blade.
Toward front of saw.
Toward rear of saw.
What saw uses a back and forth blade to cut curves?
Band.
Circular.
Jig.
Table.
Which power saw uses a circular blade to cut metal?
Abrasive cutoff.
Electric hack.
Horizontal band.
Portable jig.
Which hand(s) should be used when operating a portable circular saw?
Both.
Either.
Left.
Right.
A hammer drill is used to drill holes in:
Masonry.
Metal.
Plastic.
Wood.
What hand tool should be used before starting to drill a hole in metal with a portable electric drill?
Center punch.
Cold chisel.
Countersink.
Screwdriver.
A table saw blade should be installed with the teeth pointing:
Away from the direction of the rotation of the motor.
Perpendicular to the saw guard.
Toward the direction of the rotation of the motor.
Toward the rip fence.
It is unsafe to use a grinding wheel with a diameter less than:
3/4 its original diameter.
1/2 its original diameter.
6"
8"
What power tool is used to straighten and smooth edges of boards and to cut bevels?
Drill.
Grinder.
Jointer.
Planer.
Which hand(s) should be used when operating a portable belt sander?
Both.
Left.
Neither.
Right.
A stationary power tool with abrasive wheels or wire brush wheels use to sharpen tools, shape metal, or remove rust is a:
Drill press.
Grinder.
Hacksaw.
Hammer drill.
What portable power saw is used in tight situations in remodeling work?
Circular.
Miter.
Reciprocating.
Table.
