NEW
Font size
WorksheetsMTT 2026 REVISED Unit Exam: Safety — Extracted Questions
Total questions: 60
Worksheet time: 30mins
It is important to "quantify" communication because it ____________. Mark only one oval.
is required at my job
will make my shift go faster
is the ethical thing to do
will help me understand the communication process better
Three different kinds of communication methods are? Mark only one oval.
Noun, Verb, and Consonant
Spoken, Written, and Electronic
the Nina, the Pinta, and the Santa Maria
Direct, Indirect, and Neutral
A method that will help me understand the person speaking is called? Mark only one oval.
Active Listening
Distracted Listening
Cognitive Engagement
Luke's Principal
The outcomes of ____________ must be communicated to all employees who participated to ensure transparency and promote workplace safety. Mark only one oval.
Required training sessions
Environmental tests
Mandatory company outings
Safety drills
Which federal agency is responsible for ensuring that workplaces are safe and healthy for employees? Mark only one oval.
Office of Standards and Health Agency
Occupational Safety and Health Administration
Occupational Security and Hearing Association
Office of Statutes and Heritage Acquisitions
Which of the following types of hazards would be monitored and regulated by the EPA (Environmental Protection Agency)? Mark only one oval.
Pollutants in air and water
Electrical hazards
Workplace ergonomics
Noise from machinery
The Environmental Protection Agency (EPA) requires that inspection reports be thoroughly documented for which of the following? Mark only one oval.
Waste disposal procedures
All pollutants discharged into air or water
All storage of flammable materials
Employee training records
Which of the following would be a liaison to communicate safety concerns or potential ergonomic improvements to? Mark only one oval.
An emergency response team
A hazardous materials team
A Safety Committee
A emergency rescue squad
What are some key factors to handling conflict professionally? Mark only one oval.
Avoid it at all cost
Always get your way
Be the solution, be respectful, and be about resolution
Always go to HR
Consensus is important when making decision inside of a team? Mark only one oval.
False
True
For enhanced eye protection during welding tasks, safety glasses equipped with side shields should be worn in combination with ________. Mark only one oval.
Goggles
Face masks
Ear protection
A welding helmet
OSHA regulations are primarily designed to control which of the following workplace hazards? Mark only one oval.
Exposure to hazardous chemicals
Employee vacation schedules
Speed of machinery in the plant
Company profit margins
When using a half-mask respirator, during which procedure should a worker cover the cartridges with their hands to ensure proper fit and function? Mark only one oval.
Prepare to enter a hazardous environment
Test the respirator for proper seal
Remove the mask safely
Ensure continuous airflow while working
Why is attendance at your job important? Mark only one oval.
It's not
It shows your commitment to the agreement you made with the company
It's only important if you're a manager
Being late a few times is okay
According to OSHA, which of the following documents must be easily accessible to all employees? Mark only one oval.
Workers' and Unions' Right and Dates for Upcoming Meetings
Safety Data Sheets
The definitions for various hazardous materials
Equipment maintenance schedule
The ________ provides detailed information about the safe handling, storage requirements, recommended personal protective equipment (PPE), and proper disposal procedures for each chemical used in the workplace. Mark only one oval.
OSHA
Labels and signs
Activity logs
Safety Data Sheets (SDSs)
Which of the following training courses is required to be completed every year to ensure ongoing safety compliance? Mark only one oval.
Emissions control
OSHA
8-hour HAZMAT
JIT manufacturing
Which of the following statements about Safety Data Sheets (SDS) is accurate and most relevant to ensuring workplace safety? Mark only one oval.
Obsolete SDS documents should be retained for future reference.
The older Material Safety Data Sheets (MSDS) can be used instead of the current SDS.
A single extended SDS can be used for all hazardous material types.
All chemicals that employees may come in contact with must have an SDS.
The Emergency Response Team should be notified immediately if you observe a(n) ________. Mark only one oval.
A machine that has suddenly stopped working
A machine that is producing parts out of spec
An unclean work area
A hazardous material or chemical spill
A worker should not unload a truck if they do not understand the meaning of a safety placard displayed on the truck. Why is it important for workers to fully comprehend all safety placards before unloading? Mark only one oval.
Placards tell workers how long the job will take
Placards list who packed the truck
Placards help organize delivery routes
Placards show safety risks, like fire or chemical danger
Why is it important to wear close-fitting clothing when working around machines? Mark only one oval.
To keep the machine clean
To prevent damage to the machine
To prevent injury caused by clothing getting caught in machinery
To present an attractive appearance for visitors
Which of the following situations requires immediately lockout of a machine? Mark only one oval.
Guard has been bypassed
Machine is about to fail but is still producing bad parts
Machine is running inefficiently
Nearby machine has failed
If an operator fails to test equipment after it has been locked out to ensure it is de-energized, ________. Mark only one oval.
The lockout will prevent energizing the power
The circuit will not operate
They should apply a tag stating so
They should be retrained to reinforce proper lockout/tagout safety procedure
If an operator becomes aware of a safety issue with a machine, what is the most appropriate action to take to ensure workplace safety? Mark only one oval.
Attempt to fix the problem themselves.
Proceed with caution while using the machine.
Dismiss the line for the day due to unsafe conditions
Immediately inform a supervisor about the safety concern.
In terms of workplace safety, every employee is responsible for promptly reporting ________ to prevent accidents and injuries. Mark only one oval.
Unclean areas
Unsupervised labor
Lazy employees
Improperly guarded equipment
A machine ________ is a safety device specifically designed to protect operators from coming into contact with hazardous moving parts during operation. Mark only one oval.
Spindle
Guard
Rest
Emergency stop
What is the primary function of a mechanical interlock? Mark only one oval.
To speed up machine start-up
To allow machines to run without supervision
To prevent equipment from operating unless conditions are safe
To alert workers when tools need maintenance
Before performing any maintenance on electrical circuits, which safety procedure should be strictly followed to ensure all energy sources are isolated and accidental energization is prevented? Mark only one oval.
Pushing Emergency stops
Using lockout/tagout procedure
Unplugging all machines
Deactivating the circuit breaker
When multiple individuals are required to service or maintain a machine, who is responsible for applying the lockout/tagout devices? Mark only one oval.
Each person must supply their own lock and key to the hasp.
The immediate supervisor performs a master logout/tagout.
Each party must coordinate their time during the lockout/tagout.
Every department performs their own lockout/tagout.
Tools operated electrically or by pneumatic (air) power are classified as ________ tools. Mark only one oval.
Power
Garage
Hand
Handyman
What is the most important first step to ensure safety when using hand tools? Mark only one oval.
Only use a tool for its intended purpose and follow manufacturer guidelines
Wear the appropriate personal protective equipment (PPE) for the task
Be extra cautious when using worn or damaged hand tools
Modify or alter tools to better fit a specific task
Power tools are more dangerous than hand tools because they ________. Mark only one oval.
Are connected to a power source
Are heavier and bulkier than their hand tool counterpart
Operate at higher speeds and forces, making accidents more severe
Are inherently more difficult to control
What is the purpose of the three prongs on a 110-volt power tool's power cord plug? Mark only one oval.
One is the hot, one is the neutral, and one is the ground.
One is the hot, one is the neutral, and one is the stabilizer.
Two are live and the third is a stabilizer
Two of them are for AC current, and the third is used for DC current.
Which device is specifically designed to safeguard the valve stem of a compressed gas cylinder during storage or transport? Mark only one oval.
Restraining chain
A dolly or handcart
Steel safety cap
A stainless steel regulator
Which term refers to gases that support and intensify the burning of a fire? Mark only one oval.
Inert
Oxidizer
Flammable
None of the above
Which of the following is commonly referred to as a manually operated forklift used for lifting and moving pallets in warehouses? Mark only one oval.
Pallet jack
Hand truck
Pry truck
Dolly
In industrial workplaces, which of the following equipment is commonly used to safely lift and transport heavy loads? Mark only one oval.
Forklifts, hoists, and overhead cranes
Platform lifts, hoists, and chain falls
Manual lifts, platform lifts, and scissor lifts
Derricks, tower cranes, and scaffolding
Cranes must be operated exclusively by a ________ to ensure safety and compliance with regulations. Mark only one oval.
Safety engineer
Forklift truck driver or crane operator
A supervisor
A trained and Certified crane operator
Under what circumstances, if any, is it acceptable to use a hoist to lift a load that exceeds the hoist's rated capacity? Select all that apply. Check all that apply.
When it does not exceed 5 percent of capacity
When the load is lifted carefully
When it does not exceed 10 percent of capacity
Never
According to OSHA regulations, how often must forklift safety inspections be conducted to ensure workplace safety? Mark only one oval.
Hourly
Weekly
Daily
Monthly
To ensure immediate cessation of movement, a robot's teach pendant should be equipped with a ________. Mark only one oval.
Safety light barrier
Padlock device
Safety interlock switch
Deadman switch and emergency stop
What is the primary cause of most industrial accidents involving robots? Mark only one oval.
Unexpected or abrupt robot motion
Faulty safety interlocks
Inadequate operator training
Errors in teach pendant usage
To enhance workplace safety, organizations should ________ to identify potential hazards. Mark only one oval.
Report all incidents to OSHA directly
Conduct performance reviews
Perform their own safety inspections
Reflect on annual reviews
No matter the method of collection, safety concerns should be ________. Mark only one oval.
Ignored unless reported by supervisors
Carefully recorded and addressed as needed
Disregarded
Sent only to OSHA and senior leaders
Integrating safety measures at the initial stage involves incorporating them into the ________. Mark only one oval.
Safety guidelines and standards
Safety Committee
Safety review or audit
Standard operating procedure (SOP)
Mirrors contribute to pedestrian walkway safety by ________. Mark only one oval.
Assisting with vehicle parking
Illuminating poorly lit paths
Reducing blind spots for pedestrians
Providing a place for personal grooming
It is important for supervisors and/or safety committees to be informed about ________. Mark only one oval.
Budget issues
Only minor concerns
Potential ergonomic enhancements
Unclean areas
To safely lift an object and protect your back, you should stand with your feet shoulder width apart, ________, and then pick up the item. Mark only one oval.
Bend at the waist
Place one knee on the ground
Squat down with your feet on either side of the object
Bend at the knees
Workers attending ________ must have access to a copy of the applicable OSHA standard. Mark only one oval.
Safety committee meetings
OSHA required training
Production training
New line planning meetings
The classification of a fire is based on the ________. Mark only one oval.
Type of extinguishing agent used
Temperature at which the fire burns
Size of the fire
Type of material involved
If the grounding prong is broken off from a power cord, what should you do? Mark only one oval.
Use it only if the outlet is not grounded
Use it only if the equipment is double insulated
Use it only if the tool is double insulated
Never use it
Who should be trained in the details of a company's Emergency Action Plan? Mark only one oval.
All employees
Designated first responders
Emergency medical technicians
All floor supervisors
Applying cool water is recommended for ________. Mark only one oval.
Rashes
Minor burns
Muscle strains
Migraines
A person is at risk of tetanus after ________. Mark only one oval.
being cut by a rusty object
exposure to heavy metals
clothing gets caught in machinery
straining while lifting a heavy object
The most crucial skill a Receiver can possess for effective communication is ________. Mark only one oval.
Listening
Language
Feedback
Transformation
When a message appears unclear or negative, the Receiver should request ________ from the Sender. Mark only one oval.
Cues
Clarification
Common Patterns
Concerns
The special responsibility of the Receiver is to avoid making ________. Mark only one oval.
Preferences
Assumptions
Internal Filters
Translation Errors
How should you handle a phone call from an upset customer? Mark only one oval.
Direct the customer to speak with your manager.
Use positive gestures to try to calm the customer.
Stay polite and address their issues in a professional way.
Put the customer on hold until they calm down.
Emotional Intelligence is the understanding that emotions, whether in the background or in the open, affect our communication and interaction with others. Mark only one oval.
False
True
Understanding Implicit Bias can make you a better employee and manager? Mark only one oval.
True
False
