Interior Design 3.02

Jessica wants to draw her bedroom to scale using 1/4 inch = 1 foot. To ensure Jessica's wall measurements are the correct size, she should use which tool?

• Architectural scale

• Drawing board

• Drawing pen

• T-square

Which industry standard software is used by architects and design professionals to support building information modeling (BIM) workflows?

• Homestyler

• Illustrator

• Photoshop

• Revit

How can Maggie tell the difference between interior walls and exterior walls on a standard floor plan?

• Interior wall thicknesses are typically four inches wider than exterior wall thicknesses

• Interior wall thicknesses are typically two inches wider than exterior wall thicknesses

• Exterior wall thicknesses are typically two inches wider than interior wall thicknesses

• Exterior wall thicknesses are typically six inches wider than interior wall thicknesses

Nathan MOST LIKELY drew his orthogonal lines lightly because:

• All lines on a perspective drawing should be drawn lightly.

• Most of the orthogonal lines will eventually be erased.

• Orthogonal lines must be traced with ink later

• One should only use a dark pencil lead.

Jessica wants to experiment with different furniture arrangements for her bedroom without making changes to her floor plan. Which tool/material should she utilize on top of her existing floor plan?

• Architectural Scale

• Drawing board

• Tracing paper

• T-square

What two tools would Victoria need to draw perpendicular horizontal and vertical lines on her drawing?

• Drafting board and Architectural Scale

• Triangle and Architectural Scale

• T-square and Drafting Board

• T-square and Triangle

A limitation of a section drawing is that:

• It only portrays information at the point of the cut.

• It only portrays the floor plan.

• It only portrays one interior wall.

• It only portrays a rendering.

If the horizontal line on a perspective drawing is close to the floor, what can one infer about the person drawing the picture?

• the artist is standing up.

• the artist is using a graphite pencil.

• the artist is using a T-square.

• the artist is low to the ground.

Emily measured two walls on her floor plan. She was able to determine which wall was an internal wall and which was an external wall because:

• external walls are typically two inches thicker than internal walls.

• external walls are typically 6 inches thicker than internal walls.

• internal wall thicknesses are the same as exterior wall thicknesses.

• internal walls are typically 2 inches thicker than external walls

When one draws an interior wall elevation, objects that sit on the floor should:

• be drawn on top of the page.

• drawn in the middle of the page.

• be drawn on the bottom of the page.

• not be drawn.