Ejercicios RVT ACP

Open Sample 11

- Activate Level 1 Floor plan

- In room Living 106, select on of the component Sofa – Ottoman

- Edit the family in the Family editor

- Activate the Ref. Level view

- Using Model text, enter the string 123 and place it centered on the sofa

- Change the model text depth to 300

- Load the edited family in to the project and overwrite the existing version and its parameter values

- How many sofa-ottoman components that reads left to right

Open sample 12

- Activate Sheet A102-Plans

- Create a Guide Grid, name it FLOOR PLAN GUIDE GRID. Change the guide spacing to 200mm

- Move the level 1 view so that the A1 grid intersection is congruent with the lower right intersection of the first full guide grid intersection

- What is the distance between column grid 7 and the nearest vertical guide gridline to the right in mm?

Open Sample 1

- Activate the Typical Floor Wall Connection detail view

- Change the floor type 3

- What is the volume cubic meters mm?

Open Sample 2

- Activate Level 2 floor plan

- Create a new railing using following option:

.- Use the pick lines draw tool

.- Railing Type_ Handrail – pipe

.- Offset: 200mm from the concrete walls as show in the image

- What is the height of the completed railing in mm?

Open Sample 13

- Create mass floor for Level 1-5

- What is the floor area of the floor associated with Level 2 in square meters?

Open Sample 14

- Create new legend view

.- For the name: Project furniture legend

.- Assign the scale 1:25

- Place the floor plan and left side elevations legend components for the following

.- Furniture: Chair 1

.- Furniture: Chair 2

.- Furniture: Chair 3

- Choose the option that accurately represents the left elevation for Chair 1

Open Sample 15

- Activate the Level 2 floor plan

- Import the CAD file: Sample CAD file.dwg using Manual – Origin positioning

- Place the imported file at location so that the midpoint on the back of the middle chairs it at intersection of the grid lines D6 on the observation Deck

- Place a dimension from the right end chair back of the left end chair to the outside railing

- What is the value of dimension in mm?

Open Sample 1

- Activate the Typical Foundation Detail view

- Create a filled region using the vertical fill pattern inside the floor area as shown in the image

- What is the area of the filled region in square meters?

Open Sample 16

- Activate the Site floor plan view

- Create a Building pad using the boundary as shown

- Set it at Level 1

- Make the height offset from Level 1 to be -3000

- Edit the Structure of the pad to be 500mm thick

- What is the area of the building pad in square meters?

Open Sample 1

- Activate the East Building elevation view

- Select the curtain wall B

- Change the Vertical Grid Justification to end

- What is the area panel B in square meters?