Forklift Operation Quick Check

Who is legally allowed to operate a forklift for Iron Horse Tools?

• Any employee

• Any employee over the age of 18

• Only the shop employees

• Any employee over 18 that has been certified to operate a forklift

Which of the following is not a reason for retraining in the use of forklift operation?

• Lack of interest in forklift operation.

• There is a change in workplace conditions that may affect safe operation of the vehicle.

• • ​

  • The driver has been observed operating unsafely.

• The operator is involved in an accident or near miss.

Forklifts stability, speed, breaking distance, and power vary depending on the size of the load and the position of the forks.

• True

• False

Which of the following is an incorrect example of "The Golden Rules of Forklift Operation?"

• No personnel within 6 feet of the forklift while it is in operation.

• The operator does not need to ensure all personnel are clear prior to operating the forklift or moving the forks.

• If the Forklift operator does not have a clear line of site during operation, a spotter will be designated and remain in the line of sight of the operator ensuring the 6 feet buffer zone is adhered to at all times while in operation.

• Only approach the forklift when it is safe, the load is stable and secured, the forklift has come to a complete stop, and the operator signals you to approach.

____ ____ AUTHORITY must be utilized at ALL times when the operation or conditions are unsafe.

• Iron Horse

• Work Permit

• Stop Work

• The Housing

When performing a forklift inspection, you should look for which of the following? (Choose all that apply)

• Oil, windshield washer fluid levels.

• Tire condition and pressure.

• Leaks, cracks, or defects in hydraulic hoses and mast chains.

• Reverse alarm, clutter near the pedals, and a working horn.

Please fill in the blank. Perform work only on the Forklift Operator side. No work to be performed on the _____ side of the operator including the rear. The forklift operator side is considered the working side while the other side is considered the non-working side.

No personnel allowed in the bed of the truck/trailer while actively loading and unloading equipment. Personnel only allowed in back of pickup bed/trailer to perform ________.

• loading

• rigging

• strapping

• tethering