Test 1-100

What does a YANG model provide?

• standardized data structure that can be used only with NETCONE or RESTCONF transport protocols

• creation of transport protocols and their interaction with the OS

• user access to interact directly with the CLI of the device to receive or modify network configurations

• standardized data structure independent of the transport protocols

Refer to the exhibit. Which two commands are required on router R1 to block TP and allow all other traffic from the Branch 2 network? (Choose two)

• interface GigabitEthernet0/0

  ip address 10.0.0.1 255.255.255.252

  ip access-group 101 out

• access-list 101 deny tcp 10.0.2.0 0.0.0.255 host 10.0.101.3 eq ftp-data

  access-list 101 permit ip any any

• access-list 101 deny tcp 10.0.2.0 0.0.0.255 host 10.0.101.3 eg ft

  access-list 101 permit ip any any

• interface GigabitEthernet0/0

  ip address 10.0.101.1 255.255.255.252

  ip access-group 101 in

• access-list 101 deny tcp 10.0.2.0 0.0.0.255 host 10.0.101.3 eq ftp

  access-list 101 deny tcp 10.0.2.0 0.0.0.255 host 10.0.101.3 eq ftp-data

  access-list 101 permit ip any any

What is a fact about Cisco EAP-FAST?

• It is an lET standard.

• It does not require a RADIUS server certificate.

• It operates in transparent mode

• It requires a client certificate.

A company plans to implement intent-based networking in its campus infrastructure. Which design facilitates a migration from a traditional campus design to a programmable fabric design?

• three-tier 

• routed access

• two-tier

• Layer 2 access

Refer to the exhibit. Which privilege level is assigned to VTY users?

• 13

• 7

• 15

• 1

Which resource must a hypervisor make available to the virtual machines?

• Storage

• secure acc

• IP address

• Bandwidth

In a Cisco Catalyst switch equipped with two supervisor modules, an administrator must temporarily remove the active supervisor from the chassis to perform hardware maintenance on it. Which mechanism ensures that the active supervisor removal is not disruptive to the network operation?

• SSO

• NSF/NSR

• HSRP

• VRRP

An engineer must configure interface and sensor monitoring on a router. The NMS server is located in a trusted zone with IP address 10.15.2.19. Communication between the router and the NMS server must be encrypted and password-protected using the most secure algorithms. Access must be allowed only for the NMS server and with the minimum permission levels needed. Which configuration must the engineer apply?

• ip access-list standard nms

  permit 10.15.2.19 0.0.0.0

  shmp-server view ro iso included

  snmp-server view ro ifEntry included

  snmp-server group ms v3 priv read ro access nms

  snmp-server user user1 nms v3 auth sha Password1 pri aes 256 Password 123

• ip access-list extended nms

  permit 1 host 10.15.2.19 any

  snmp-server view ro internet included

  snmp-server view ro ifEntry included

  snmp-server group ms v3 priv notify ro access nms

  snmp-server user user1 nms v3 encrypted auth md5 Password1 pri 3des Password 123

• ip access-list standard nms

  permit 10.15.2.19 0.0.0.0

  snmp-server view rw iso included

  Mehn

  2024.

  snmp-server view.w ifEntry included

  snmp-server group nms v3 auth write w access nms

• ip access-list standard nms

  permit 10.15.2.19 255.255.255.255

  snmp-server view ro cisco included

  snmp-server view ro ifEntry included

  snmp-server group nms v3 priv read ro access nms

  snmp-server user user1 nms v3 auth 3des Password1 pri aes 192 Password123

What is the difference between a RIB and a FIB?

 

• The FIB is where all IP routing information is stored.

• The RIB is used to make IP source prefix-based switching decisions

• The FIB is populated based on RIB content

• The RIB maintains a mirror image of the FIB

Refer to the exhibit. What does the error message relay to the administrator who is trying to configure a Cisco IOS device?

• The NETCONF running datastore is currently locked.

• NETCONF message with valid content based on the YANG data models was made, but the request failed

• A NETCONF request was made for a data model that does not exist.

• The device received a valid NETCONF request and serviced it without error.