6035DRAINPPT9

What should you inspect the facia boards for before starting work on rainwater system installation?

• Paint color

• Straightness and level

• Material type

• Length

Why is it important to inspect the underfelt of the roof before installing a rainwater system?

• To check for color consistency

• To ensure it is dry

• To look for any rips or deterioration

• To measure its thickness

What tool is suggested for ensuring a straight line during the installation of rainwater systems?

• String line

• Bradawl

• File

• Hacksaw

Which tool would be used to make precise holes or marks in the installation process of rainwater systems?

• String level

• Claw hammer

• Bradawl

• File

What is the first step in installing a rainwater system according to the document?

• Measure the overall length and work out the 1:600 fall.

• Establish the position of the gutter outlet.

• Tie the string line on the first fascia bracket.

• Hold the running outlet on the fascia board and over the drain.

What should be done after establishing the high position of the gutter?

• Measure the overall length and work out the 1:600 fall.

• Tie the string line on the first fascia bracket.

• Hold the running outlet on the fascia board and over the drain.

• Fix the first fascia bracket at this point.

What is the purpose of tying the string line on the first fascia bracket?

• To measure the overall length of the gutter.

• To establish the high position of the gutter.

• To ensure the gutter is aligned with the centre of the drain.

• To work out the 1:600 fall.

What is the first step in installing a running outlet for a rainwater system according to the instructions provided?

• Screw the running outlet in position

• Move the running outlet down the calculated measurement A distance

• Place the string level on the string and level up the running outlet, then mark with a pencil

• Tightly secure the string line around the running outlet

What is the purpose of moving the running outlet down the calculated measurement A distance?

• To secure the string line

• To mark the position with a pencil

• To give the fall

• To screw the running outlet in position

Why does the string need to be tightly secured around the running outlet?

• To mark the position with a pencil

• To screw the running outlet in position

• To show the fall and the position of all the facia brackets

• To level up the running outlet