7202-110 Plastic Pipework Quiz

What type of pipe clip is this?

• A Nail clip

• A snap clip

• A sealed clip

• A hinged clip

• A double hinged clip

Which 2 ways can plastic pressure pipe be connected?

• Pushfit joints

• Soldered joints

• Compression fittings - Type A

• Compression fittings - Type B

• Solvent weld fittings

What are the pipe clipping distances for 15mm plastic pressure pipe?

• Horizontally: 200mm - 0.2m

• Horizontally: 300mm - 0.3m

• Vertically: 400mm - 0.4m

• Vertically: 500mm - 0.5m

• Horizontal and Vertical spacing: 600mm - 0.6m

Why would you use these coloured hinged clips?

• To make your work look good.

• To identify the hot and cold supply pipes when concealed in walls and floors.

• To identify the flow and return pipes on a heating circuit when concealed in walls and floors.

• To Identify different pipe runs when concealed in walls and floors.

• To Identify if the pipes are near to hot or cold sources of energy.

What type of fitting is this?

• Pushfit

• Soldered

• Compression type A

• Compression type B

• Cimp

Identify this fitting.

• A pipe insert for Copper

• A pipe insert for plastic to plastic fittings

• A pipe insert for plastic to compression fittings

• A pipe insert for plastic to copper fittings

• A pipe insert for plastic to LCS fittings

What are the safety and maintenance requirements for this tool?

• Check the cutting wheel for damage and make sure it’s sharp

• Check the tool casing for any damage.

• Only to be used on plastic pressure pipe.

• Do not check the blade with your finger.

• Check that all fixings are secure not loose.

Why is it important to fix 15mm pipework at the required clip spacing of 300mm - 0.3m?

• To prevent the pipework sagging.

• To prevent thermal expansion.

• To improve the flow of the water.

• To ensure the correct fall in pipework.

• To increase the thermal expansion.

What are the safety and maintenance requirements when using this tool?

• Keep the blade away from your body.

• Store in a safe and secure place when not in use.

• Use PPE when using the tool - Gloves, Glasses

• Ensure you keep the blade sharp and in a good condition.

• Ensure the tool moves freely and is lubricated.

Which plastic pipe size should be clipped at 800mm 0.8m Vertically?

• 10mm

• 15mm

• 22mm

• 28mm

• 32mm