A type of lighting used for instrumentation displays on vehicle instrument panel clusters. This type of fluorescent display. (VFD)

The data network used to connect various electronic systems on vehicles to share data.

A type of lighting used in various automotive applications, such as warning indicators and alphanumeric displays.

The traditional bulb that uses a heated filament to produce light.

Incandescent bulbs are inefficient , converting only about _____ of the electricity to visible light.

What kind of incandescent lamps are filled with bromine or iodine gas?

LED's are often required to give off a specified amount of light; to achieve this they are usually connected in groups called ________.

Which type of bulb works well as a combination taillight and brake light because it has one filament that emits a small amount of light, and a second filament that emits more light?

Which type of lamp base gets its name from the two retaining pins on the side of the base.

Which type of lights usually light up as part of a self-test when the ignition initially comes on to show they are in working order?

For safety reasons, ______ continue to operate when the light switch is moved to the headlight position

Many vehicles by law now have a highter additional third brake light mounted on top of the trunk lid or on the rear window called a _____ light.

White lights mounted at the rear of the vehicle that provides the driver with vision behind the vehicle at night are called ______.

Which type of lights simultaneously cause a pulsing in all exterior indicator lights and both indicator lights on the instrument panel?

Existing lights that turn on when the vehicle is running and turn off when the engine stops in order to improve the behicle's visibility to other drivers in all weather conditions are called ______.

A (n) ______ headlight has a highly polished aluminized glass reflector that is fused to the optically designed lens

Which type of headlight is filled with xenon gas and does not use a filament-style lamp?

Which type of lights are used with vehicle lighting in poor weather such as thick fog, driving rain or blowing snow?

In comprehensive adaptive lighting systems, otherwise known as smart lighting, all lighting system decisions are determined by the _________.

Wattage is found by multiplying the voltage used by the lamp by the current flowing through it.

High-intensity halogen lamp light comes from metallic salts that are vaporized within an arc chamber.

Some countries mandate the HID headlamps may only be installed on vehicles with lens_cleaning systems and automatic self-leveling systems.

Wattage is an indication of light output.

Dome lights use festoon-style lights, which have a base on each end of a cylindrical light bulb.

Government regulations control the height of taillights and their brightness.

Taillights are the only white lights on the rear of the vehicle.

Imported behicles tend to have separate amber-colored turn signal lamps on both the front and the rear of the vehicle

The beam selector switch is double-pole, single-throw switch, meaning it has two movable poles but makes contact in one position.

Some vehicles use LED lights as headlights.

Passive night vision systems use a heat-sensing camera to pick up thermal radiation emitted by objects.

Cornering lights are white lights usually installed into the bumper or fender and are designed to provide side lighting when the vehicle is turning corners.

Automatic headlight-leveling systems ensure the headlights are always correctly aligned, regardless of the load the vehicle is carrying.

To reduce the amount of wiring required, a system is used that integrates sensors into a common wiring harness, called a BCM.

Not all wiring diagrams use the same symbols or the same numbering system.

Modern vehicles use many different kinds and sizes of _______, also known in some places as light bulbs or light globes.courtesy

One of the advantages of a(n) __________ is that it turns on instantly.

In a bulb marked 12v/21w, the ______ will consume 21 watts of power when 12 volts is applied across it.

Many newer bulbs use a ________ base either made from the glass bulb itself or with a built-in plastic base.

_______ lights are usually controlled by the vehicle body computer with inputs from the ignition and door switches either in the handle, latch, or door pillar.

________ lights are used to mark the sides of some vehicles and are often located down the sides of the vehicle or trailer.

Today's computer-controlled brake lights are activated by the _______ when the computer senses an input from the bake pedal switch.

The cancelling mechanism of the _______ lights operates to return the switch to its central or "off" position after a turn has been completed and the steering wheel is returned to the straight ahead position

Some domestic vehicles use the rear brake lamps as turn signals by flashing the _______ on one side to indicate the turn.

Most vehicle________ require two beams to provide for a high beam and low beam operation.

A (n) _________ headlight system produces a high-intensity forward beam and uses a lens system to project the light forward, rather than the traditional reflector system

Active ________ systems use an infrared light generator that projects infrared light in front of and to the side of the roadway ahead

____________ are installed on the front of the vehicle and provide higher intensity illumination over longer distances than standard headlight systems

___________ headlights have the ability to adjust the length of the headlight beam based on the distance of oncoming traffic

Manufacturers design the circuits to operate in specific ways and then create schematics or ________, which are a diagrammatic layout of the entire circuit.

What part is labeled A

What part is labeled B?

What part is labeled C?

What part is labeled D?

What part is labeled E?

What part is labeled F?

What part is labeled G?

What part is labeled H?

What part is labeled I?

What part is labeled J?

What part is labeled K?

What part is labeled L?

What part is labeled M?

Materials which can conduct electricity better than insulator,but not as well as conductors. This is the definition of

Which is not one of the properties of semiconductor?