NEW
Font size
WorksheetsScience Physics Express 1: Measurement_Vernier_Micrometer
Total questions: 29
Worksheet time: 20mins
What is the reading on the vernier calipers?
8.62 cm
8.62 mm
8.52 cm
8.63 cm
What is the reading on the vernier calipers?
1.05 cm
1.06 cm
1.16 cm
1.66 cm
What is the reading on the vernier calipers?
4.47 cm
4.77 cm
4.27 cm
4.37 cm
What is the reading on the vernier calipers?
6.0 x 10-2 m
6.0 x 10-1 m
6.0 x 10-2 cm
6.0 x 10-1 cm
What is the reading on the vernier calipers?
7.05 cm
7.05 mm
7.15 cm
7.20 cm
What is the reading on the vernier calipers?
6.42 cm
6.44 cm
6.43 cm
6.53 cm
What is the reading on the vernier calipers?
6.42 cm
6.44 cm
6.43 cm
6.53 cm
The reading of the micrometer is .............................
2.38mm
2.88mm
2.58mm
5.38mm
The reading of the micrometer is .............................
8.05mm
8.55mm
9.00mm
12.05mm
This set of Vernier callipers has a zero error of -0.03 cm. What is the actual measurement?
5.34 cm
5.37 cm
5.40 cm
5.44 cm
The diagram shows part of a vernier scale.
30.5 mm
33.5 mm
38.0 mm
42.5 mm
What gives the most accurate value for the internal diameter of a test tube?
a measuring tape
a metre rule
a micrometer screw gauge
vernier calipers
The width of a wooden block is measured using vernier calipers.
What is the width of the block?
3.5 mm
5.3 mm
8.0 mm
8.5 mm
The diagram shows a micrometer.
Which reading is shown?
2.23 mm
2.73 mm
3.23 mm
5.23 mm
A plumber needs to measure the internal diameter of a water tap as accurately as possible.Which instrument should be used?
measuring tape
metre rule
micrometer
vernier calipers
What instrument should be used to measure the diameter of a steel ball bearing as accurately as possible?
calipers
micrometer screw gauge
ruler
vernier caliper
What gives the most accurate value for the internal diameter of a test-tube?
a measuring tape
a metre rule
a micrometer screw gauge
vernier calipers
A diameter of a marble ball is measured using vernier calipers.
Refer to the diagram, which of the following statement is found to be INCORRECT?
Note:
Observed reading means zero error is not taken into account.
Corrected reading means zero error is taken into account.
zero error = - 0.02 cm
zero error = - 0.08 cm
observed reading = 4.03 cm
corrected reading = 4.05 cm
Vernier calipers were used to measured the thickness of a diameter of a metal ball.
There is a zero error as shown in the diagram.
The readings below are correct, EXCEPT?
zero error = + 0.01 cm
observed reading = 3.24 cm
corrected reading = 3.24 mm
corrected reading = 3.23 mm
which one has higher accuracy to measure the diameter or thickness of small object
ruler
measuring tape
micrometer screw gauge
vernier calipers
vernier scale can measure the smallest reading up to 0.1 mm or
1 cm
0.01 cm
1 mm
0.1 cm
micrometer screw gauge is more accurate than the vernier calipers
True
false
Error that be obtained from a measuring instrument is
zero error
parallax error
This set of Vernier callipers has no zero error. What is the actual measurement?
5.34 cm
5.37 cm
5.40 cm
5.44 cm
What is the reading of Micrometer Screw Gauge?
5.87 mm
6.37 mm
6.87 mm
5.47 mm
Refer to the diagram, the thickness of a wooden block, d is measured using a micrometer screw gauge. Which of the following is the correct reading?
Note: Diagram (a) shows a zero error; (b) diameter reading.
15.62 mm
15.50 mm
15.5 mm
15.5 cm
All statements below are correct, EXCEPT?
Note:
Observed reading means zero error is not taken into account.
Corrected reading means zero error is taken into account.
zero error = + 0.02 mm
observed reading = 2.37 mm
corrected reading = 2.35 mm
corrected reading = 2.39 mm
What is the reading of Micrometer Screw Gauge if there is a zero error of +0.02 mm?
5.87 mm
6.85 mm
6.87 mm
6.89 mm
What is the reading of Micrometer Screw Gauge if there is a zero error of -0.02 mm?
5.87 mm
6.85 mm
6.87 mm
6.89 mm
