Font size
WorksheetsElectricity and Circuits Review
Total questions: 81
Worksheet time: 58mins
This is the symbol for a...
Thermistor
Bulb
Fixed Resistor
Ammeter
This is the symbol for a...
Motor
Ammeter
Bulb
Voltmeter
This is the symbol for a...
Bulb
Voltmeter
Ammeter
Motor
This is the symbol for a...
Fuse
Cell
Fixed Resistor
Variable Resistor
This is the symbol for a...
Wire
Motor
Variable Resistor
Thermistor
This is the symbol for a...
Battery
Thermistor
Motor
Fuse
In which of the following circuits will all of the remaining light bulbs go out if bulb 3 burns out?
A material that does NOT let electricity pass through it is called ...
An electrical conductor
An electrical insulator
An electrical source
An electric appliance
What is a circuit that only has ONE path for electricity to flow?
series circuit
closed circuit
parallel circuit
light bulb
To complete the circuit, a wire should be placed from —
The device used to open and close circuits is called a ______.
circuit
wire
switch
open circuit
A _____ is a pathway for the flow of electricity.
receiver
wire
switch
circuit
A/An ________________ circuit is when electricity is ABLE to flow and the motor works.
open
closed
The flow of electrons is also called..
Resistance
Voltage
Current
Magnetism
Allows electrons to flow easily from one place to another.
Resistor
Conductor
Insulator
Plastics
Which circuit below would be described as "closed"?
The push of electrons or energy from the battery is also called?
Voltage
Potential Difference
Resistance
Current
If you INCREASE VOLTAGE, what happens to CURRENT?
it increases
it decreases
it stays the same
A 3 volt battery is switch out and replaced with a 6 volt battery. What happens to the resulting current?
It halves
It doubles
It stays the same
It triples
The friction created by objects in a circuit that resist the flow of electrons/energy.
Resistance
Current
Voltage
Magnetism
If you INCREASE RESISTANCE, what happens to CURRENT?
It decreases
It increases
It stays the same
A circuit is supplied with 9 volts of potential difference from the battery. What happens to the voltage if the resistance in the circuit is increased?
It stays the same
It decreases
It increases
A 4 ohm resistor is replaced with a 2 ohm resistor. What happens to the current in the circuit?
It halves
It triples
It doubles
It quadruples
Which picture below shows a parallel circuit?
In which circuit below, will all lights go out when one light is broken?
If there is a break in an electrical circuit then...
the electricity will still flow
the electricity will jump over the gap
the electricity will not flow
you will get electrocuted
What needs to be done to this circuit so that the lamp lights up?
Close the switch
Add a source and close the switch
Add another lamp
Add another lamp and a switch
1. Which switch or switches must be closed to make the lamps light?
Only switch 1
Only switch 1
Switches 1 and 2
Switches 1 , 2 and 3
Tammy makes a complete simple circuit with one bulb and three batteries. The bulb lights for an instant and then goes out. Why?
Too much electricity flows through the bulb's filament
Not enough electricity flows around the circuit
The batteries are flat
The batteries are not good
Which statement about electric curent is correct?
It always flows clockwise
It gets used as it goes around the circuit
It flow in many directions at the same time
It always flows from the point where the electrical potential is highest to the point where it is lowest
Peter has connected two bulbs across two batteries in a simple circuit. How can she make the bulbs dimmer?
Replace one of the batteries with a section of wire
Replace one of the bulbs with a section of wire
Replace one of the batteries with a cork
Replace the batteries for more wire
If lamp 1 is unscrewed from its holder, what will happen to lamp 2?
It will get brighter
It will stay the same brightness
It will go out
Nothing will happen
Why is a bulb brighter when it is powered by two batteries rather than one?
Because the flow of electricity in the circuit is less
Because the flow of electricity in the circuit is the same
Because the flow of electricity in the circuit is greater
Because the flow of electricity will go backward
If lamp 2 is unscrewed from its holder, what will happen to lamp1?
It will stay lit
It will go out
It will get dimmer
It will dissapear
A material that does NOT let electricity pass through it is called ...
An electrical conductor
An electrical insulator
An electrical source
An electric appliance
