wayground logo

Free Printable Worksheets

Font size

S
M
L
XL
Worksheets

RA 9514

Total questions: 35

Worksheet time: 18mins

Name
Class
Date
1.

An integrated system of underground or overhead piping connected to a source of extinguishing agent or medium which when actuated by its automatic detecting device suppresses fire within the area protected even without human intervention.

a)

Automatic Fire Suppression System

b)

Approved Supervised Sprinkler System

c)

Standpipe System

d)

Fire Alerting System

2.

A passageway from one building to another, or through or around a wall in approximately the same floor level.

a)

Means of Egress

b)

Exit

c)

Horizontal Exit

d)

Interstitial

3.

A building unsafe in case of fire because it will burn easily or because it lacks adequate exits or fire escapes.

a)

Fire Hazard

b)

Fire Trap

c)

Combustible

d)

Nacelle

4.

A compilation report of all approved submittals, test and acceptable forms of all fire protection and life safety features, which shall form part of the "as-built" documents turned over by the contractor to the building owner.

a)

FSCR

b)

FSCCR

c)

FSEC

d)

FSIC

5.

A non liquid-tight transverse partition in a cargo tank.

a)

Baffle

b)

Curtain Board

c)

Plenum

d)

Bulkhead

6.

A technique to resist corrosion on a metal surface by making the surface cathode of an electrochemical cell.

a)

Damper

b)

Detearing

c)

Fulminate

d)

Cathodic Protection

7.

Any material which, by its nature or as a result of its reaction with other elements, produces a rapid drop in temperature of the immediate surroundings.

a)

Flammable Finishes

b)

Cyrogenic

c)

Compressed Gas

d)

Oxidizing Material

8.

A mechanical device consisting of linkages and horizontal bars across a door, which when pushed from the inside will cause the door to open and facilitates exit from the building, structure or facility.

a)

Panic Hardware

b)

Safety Can

c)

Vestibule

d)

Derrick

9.

A tank, vat or container of flammable or combustible liquid in which articles or materials are immersed for purposes of coating, finishing, treating, or similar processes.

a)

Cryogenic Inground Container

b)

Dip Tank

c)

Cargo Tank

d)

Electrostatic Fluidized Bed

10.

A continuous membrane or a membrane with discontinuities created by protected openings with a specified fire protection rating, where such membrane is designed and constructed with a specified fire resistance rating to limit the spread of fire, that also restricts the movement of smoke.

a)

Fire Wall

b)

Fire Barrier

c)

Fire Damper

d)

Combination Fire and Smoke Damper

11.

Standard for Fire Tests of Building Construction and Material

a)

UL 1975

b)

UL 263

c)

UL 790

d)

UL

12.

Standard for Fire Retardant-treated wood and Fire Retardant Coatings for Building Materials

a)

NFPA 703

b)

NFPA 914

c)

NFPA 5000

d)

NFPA 1936

13.

Hazardous Materials Code

a)

NFPA 255

b)

NFPA 409

c)

NFPA 400

d)

NFPA 664

14.

Standard for Standard Test Methods of Fire Tests of Roof Coverings

a)

ANSI/ASME B31.3

b)

ANSI/IAS NGV1

c)

ANSI/IIAR 7

d)

ANSI/UL 790

15.

Standard for the Installation of Sprinkler Systems

a)

NFPA 13

b)

NFPA 13R

c)

NFPA 17

d)

NFPA 17A

16.

Any liquid having a flash point at or above 37.8 degree Celsius and below 60 degree Celsius.

a)

Combustible Liquid

b)

Class II Liquid

c)

Class IIIA Liquid

d)

Class IIIB Liquid

17.

Check all the coverage for this RIRR

a)

All persons, either natural or juridical

b)

All buildings, facilities or structures and their premises, erected or constructed before and after the effectivity hereof

c)

Design and installation of mechanical, electronics and electrical systems relative to fire protection

d)

Manufacturing, storage, handling and/or use, and transportation of explosives and/or combustible/flammable liquids and gases, toxic and other hazardous materials and operations, and their wastes

e)

All land transportation vehicles and equipment, ships or vessels docked at piers or wharves or anchored in seaports

18.

Fires involving flammable liquids and gases.

a)

Class A Fire

b)

Class B Fire

c)

Class C Fire

d)

Class D Fire

e)

Class K Fire

19.

Liquid having flash points at or above 22.8 degree Celsius and below 37.8 degree Celsius.

a)

Flammable Liquids

b)

Class IA Liquid

c)

Class IB Liquid

d)

Class IC Liquid

20.

Identify the grouping of these plastics:

Cellulosics (cellulose acetate, cellulose acetate butyrate, ethyl cellulose)

Chloroprene rubber

Fluoroplastics (ECTFE, ethylene-chlorotrifluoroethylene copolymer

ETFE, ethylene-tetrafluoroethylene copolymer

FEP, fluorinated ethylene-propylene copolymer)

Natural rubber (nonexpanded)

Nylon (nylon 6, nylon 6/6)

PVC (polyvinyl chloride greater than 5%, but not exceeding 15% plasticized)

Silicone rubber.

a)

Group A Plastics

b)

Group B Plastics

c)

Group C Plastics

21.

Liquids classified as non-flammable.

a)

Class I Solvents

b)

Class II Solvents

c)

Class IIIA Solvents

d)

Class IIIB Solvents

e)

Class IV Solvents

22.

A compressed natural gas-powered unit that has minimum acceptable safeguards against inherent fire hazards.

a)

Type Designation CGH

b)

Type Designation CN

c)

Type Designation DX

d)

Type Designation EX

23.

Protective Enclosure of Exit. When an exit is required to be protected by separation from other parts of the building by some requirements of this RIRR, the construction of the separation shall have at least ____ hour fire resistance rating when the exit connects 3 storey or less, regardless of whether the storeys connected are above or below the storey at which the exit discharge begins.

a)

1

b)

2

c)

3

d)

4

24.

Capacity of Means of Egress. Capacity factor for Health Care with sprinkler system for stairways (width per person).

a)

7.6 mm

b)

10.0 mm

c)

15.0 mm

d)

18.0 mm

25.

Door minimum and maximum clear openings for means of egress.

a)

700mm and 1000mm

b)

750mm and 1100mm

c)

710mm and 1220mm

d)

800mm and 1200mm

26.

When a door is required to be equipped with panic hardware by some other provisions of this Rule, the panic hardware shall cause the door latch to release when a force of not more than ____ is applied to the releasing device in the direction of exit travel.

a)

5 kgf

b)

7 kgf

c)

8 kgf

d)

9 kgf

27.

Existing stairs minimum clear width.

a)

700 mm

b)

750 mm

c)

815 mm

d)

915 mm

28.

New stairs minimum clear width for occupants greater than 2,000 persons.

a)

1100 mm

b)

1,120 mm

c)

1,420 mm

d)

1,500 mm

29.

Maximum cross slope of ramps.

a)

1:10

b)

1:12

c)

1:32

d)

1:48

30.

A combination of an automatic smoke detection system, automatic exhaust system, and an automatic water curtain.

a)

Sprinkler Vent Method

b)

Spray Nozzle Methods

c)

Partial Enclosure Method

31.

Occupant load for assembly area of concentrated use without fixed seats such as an auditorium, place of worship, dance floor, and lodge room.

a)

0.46 sq.m

b)

0.65 sq.m

c)

1.40 sq.m

d)

0.28 sq.m

32.

The occupant load of residential occupancies in numbers of persons for whom exits are to be provided except in detached single and two-family dwellings shall be determined on the basis of one person per ____ gross floor area.

a)

0.46 sq.m

b)

1.20 sq.m

c)

15.0 sq.m

d)

18.6 sq.m

33.

In hotels, what is the travel distance to exits from a guest room or guest suite to a corridor door in buildings not protected by an approved, supervised automatic sprinkler system?

a)

30 m

b)

23 m

c)

38 m

d)

10 m

34.

Minimum height of a building to be considered a high-rise.

a)

10.0 m

b)

12.0 m

c)

15.0 m

d)

16.0 m

35.

In Apartment buildings, the travel distance within any individual living unit to reach the nearest exit, or to reach an entrance door of the apartment which provides access through a public corridor to an exit on the same floor level.

a)

12.0 m

b)

15.5 m

c)

31.0 m

d)

46.5 m