Font size
WorksheetsGrade 9 Quiz 1
Total questions: 50
Worksheet time: 31mins
When filing soft metals, the file teeth are clogged with minute particles of metal. The file should be cleaned by
Washing it with water
Rubbing on wood
Washing it with dilute acid
Using file card
A hacksaw blade cuts on the
Forward stroke
Return stroke
Both forward and return strokes
Cutting depends upon the direction of force
When the file is moved to and fro over the work, it is known as
Cross filing
Pull and push filing
Draw filing
None of these
What is the name of the clamp?
Combination plier
Pipe wrench
G clamp
Sash clamp
---------- drills are the most common cutting tools used with drilling machines
Compound
Twist
Angular
Straight
Electric tools should not be used in wet locations.
TRUE
FALSE
Which metal is commonly used in the manufacture of electrical wire?
Aluminium
Copper
Mild steel
Brass
Which term is given to a material that is a mixture of two or more metals or elements?
Bond
Ferrous
Alloy
Ductile
You must always wear an ............. in the work shop to protect your clothes.
What are complementary angles?
Two angles which sum is 100º
Two angles which sum is 90º
Two angles which sum is 180º
What is a bisector?
A line that divides one angles into two equals angles.
A line that divides an angle from the vertex.
A line that you use to calculate where the vertex is.
What is it called??
Protractor
Compass
Graphite pencil
The 60
In a triangle, how many total degrees are there?
90 degrees
180 degrees
120 degrees
360 degrees
.
.
.
What is the name of this kind of triangle?
What hand tool is this?
Ball Peen
Mallet
Claw Hammer
sledge
What is the name of this type of screw driver?
Phillips head
flat head
hex head
D head
What hand tool is this?
hand saw
Hack saw
Back saw
C- Clamp saw
What is this tool?
Copings saw
Pliers
File
What is this tool?
Back saw
Jig saw
Coping saw
File
What is this tool?
Tri square
Mallet
Combo square
What is this tool?
Wood chisel
Tape measue
Steel ruler
Can be heated and reshaped many times
Thermoplastic
Thermo-setting plastic
Can be recycled
Thermoplastic
Thermo-setting plastic
What is the biggest criticism of single use plastic bottles?
A lot of them can't be recycled and end up in land-fill
They make water taste funny
They are not very functional
They are not very aesthetic
Which of the following are alloys? (choose 3)
Copper
Steel
Iron
Duralumin
18ct Gold
What is this material?
Blockboard
Plywood
M.D.F.
Mild steel is a ferrous metal
True
False
Which type of motion is in a circle?
Linear
Reciprocating
Oscillating
Rotary
What saw would you use to cut a straight line in wood with?
Tenon Saw
Coping Saw
Hack Saw
Junior Hack Saw
Name the piece of equipment you used to cut an accurate, curved line into wood?
Hack Saw
Tenon saw
Panel Saw
Coping Saw
Name the machine used to cut accurate, curved/zig zag lines in our manufactured board.
Band saw
Jig Saw
Mitre Saw
Scroll Saw
What Does P.V.A. stand for
Poly Vinyl Adhesive
Poly Vinyl Acetate
Pony Vinyl Adhesive
Pony Vinyl Acetate
What do the initials C.A.D. stand for?
Computer Aided Design
Computer Aided Development
Computer Aimed Design
Computer Aimed Development
What do the initials C.A.M. stand for?
Computer Aided Manufacture
Computer Aimed Manufacture
Computer Allotted Manufacturer
Computer Aired Maker
What is Linear motion?
It is a one-dimensional motion along a straight line
It allows a rod moving practically straight up and down to transmit motion to a beam moving in an arc
Is a periodic motion that repeats itself in a regular cycle, such as a sine wave, the side-to-side swing of a pendulum, or the up-and-down motion of a spring with a weight.
It is a repetitive up-and-down or back-and-forth linear motion.
What is Oscillating motion?
It is a one-dimensional motion along a straight line
It allows a rod moving practically straight up and down to transmit motion to a beam moving in an arc
Is a periodic motion that repeats itself in a regular cycle, such as a sine wave, the side-to-side swing of a pendulum, or the up-and-down motion of a spring with a weight.
It is a repetitive up-and-down or back-and-forth linear motion.
What is Reciprocating motion?
It is a one-dimensional motion along a straight line
It allows a rod moving practically straight up and down to transmit motion to a beam moving in an arc
Is a periodic motion that repeats itself in a regular cycle, such as a sine wave, the side-to-side swing of a pendulum, or the up-and-down motion of a spring with a weight.
It is a repetitive up-and-down or back-and-forth linear motion.
Identify this tool
C-Clamp
Bubble Level
Open Ended Wrench
Vernier Caliper
The symbol for voltage is
I
V
Amp
W
Measure of resistance
Amperes
Watts
Ohms
Volt
What is a LED?
A light
A part of a circuit
A light emitting diode
A capacitor
What is the main glue used in the Wood Technology room?
Superglue
PVA
Hot Glue
Gorilla Glue
What does PVA stand for?
Poly Viral Adhesive
Plastic Vinyl Acetate
Poly Vinyl Acetate
