NEW
Font size
WorksheetsHubs and Switches
Total questions: 20
Worksheet time: 20mins
In this type of Network, all packet shared the same resources, and there's no reservation of the bandwidths on link.
Circuit Switching
Packet Switching
Hubs
Switche
The main concern of packet switching is the loss of packets along the way due to the time required to queue, process, and eventually route packets.
True
False
In half-duplex mode, each device can both transmit and receive data at the same time.
True
False
The communication is bi-directional in a simplex communication.
True
False
In full-duplex mode, both devices can transmit and receive data simultaneously.
True
False
This device operates in physical layer in the OSI Model, and Incoming data on any port will be replicated and sent out on all other ports regardless the destination
Hubs
Switches
Router
Modems
This device performs in a full-duplex mode so this device transmit and receive data at the same time.
Switches
Hubs
Router
Modem
Which layer of the OSI does the switch operate?
Data link Layer
Network Layer
Transport Layer
Physical Layer
It is the interconnect architecture used by a switching device, which redirects the data coming in on one of its ports out to another of its ports.
CSMA/CD
Output
switch Fabric
Input
The fabric architecture makes the switch less efficient in passing traffic from one point to another and avoids collisions.
True
False
The CSMA/CD extends to the switching world to avoid collisions as much as possible.
True
False
To eliminate unnecessary broadcasts, switch forwards frames based on the destination IP Address.
True
False
The first part of the MAC address is the NIC and the second part is the OUI.
True
False
What is the layer 2 broadcast address?
01:80:C2:00:00:00
255.255.255.255
FF:FF:FF:FF:FF:FF:FF
AA:BB:CC:DD:EE:FF
A Mechanism deployed to stop the transmission If an incoming signal is detected, to avoid collision.
CSMA/CS
CSMA/CA
CSMA
CSMA/CD
When a collision is detected, the sender stops transmitting and alerts all other devices with a signal, what is this kind of signal?
Traffic signal
Alert Signal
Collision Signal
Jam signal
At first a switch knows nothing with the devices connected to it because it has to learn where everything is connected, so when it receives a packet it will broadcast the packet to every device in the network.
True
False
It is a process of breaking up a broadcast domain into the smaller broadcast domain.
LACP
STP
VLAN
Fragmentation
A type of LAG that can configured manually and does not require a partner system to be able to aggregate its member ports.
Static LAG
Dynamic LAG
LACPDU
STP
The resources in this type of switching are reserved and dedicated to a connection and will be released when the connection is torn down
Packet Switching
Circuit Switching
hubs
Switch
