NEW
Font size
WorksheetsFABRICATION
Total questions: 30
Worksheet time: 23mins
Which of the following has NOTHING to do with workplace safety? /Manakah antara berikut yang TIDAK ADA kaitan dengan keselamatan tempat kerja?
Keep and use all tools correctly and safely.
Simpan dan gunakan semua alat dengan betul dan selamat.
Do not leave the workshop without permission.
Jangan tinggalkan bengkel tanpa kebenaran.
an.
Be alert at all times, Carelessness causes accidents.
Waspada setiap masa, Kecuaian menyebabkan kemalang
Always follow the correct procedure when performing a job.
Sentiasa ikuti prosedur yang betul semasa menjalankan tugas.
An SOP is a step by step procedure that is designed to simply and standardized a task, but what does SOP stand for? / SOP adalah prosedur langkah demi langkah yang dirancang untuk sekadar memadankan tugas, tetapi apa sopan SOP?
Standard Operating Procedure /Prosedur Operasi Piawai
Systematic Operational Procedure / Prosedur operasi yang sistematik
Statistical Organizational Policies / Dasar Organisasi Statistik
Standardized Operational Procedures / Prosedur Operasi Standard
Steps to make a Standard Operating Procedure (SOP) Report? /
Langkah membuat Laporan Prosedur Operasi Standard (SOP) ?
State brand only / Nyatakan jenama sahaja
Only state model / Model negara sahaja
Specify the details of the accident /Nyatakan perincian kemalangan.
Specify the model, brand, and place including machine code /
Nyatakan model, jenama, dan tempat termasuk kod mesin
What is the name of the measuring equipment shown in Diagram 1? /
Apakah nama alat ukur yang ditunjukkan dalam Rajah 2?
Dial caliper / Dial caliper
Micrometer / Micrometer
Digital caliper / Digital caliper
Vernier caliper / Vernier caliper
What is the reading on the vernier caliper ? / Apakah bacaan pada caliper vernier?
1.05cm / 1.05cm
1.16cm / 1.16cm
1.06cm / 1.06cm
1.66cm / 1.66cm
In the diagram above, state the name of A? / Pada gambar rajah di atas, nyatakan nama bahagian A?
Motor / Motor
Pulley / Takal
Head / Kepala
Depth adjustment / Penyesuaian kedalaman
In the diagram above, state the name of B? / Pada gambar rajah di atas, nyatakan nama bahagian B?
Blade / Bilah
Column / Kolum
Spindle / Gelendong
Work table / Meja kerja
In the diagram above, state the name of C? / Pada gambar rajah di atas, nyatakan nama bahagian C?
Head/ Kepala olum
Spindle / Gelendong
Column / Kolum
Depth adjustment / Penyesuaian kedalaman
In the diagram above, state the name of D? /
Pada gambar rajah di atas, nyatakan nama bahagian D?
Base / Asas
Spindle / Gelendong
Adjustable frame / Bingkai boleh laras
Sliding pin handle / Pemegang pin gelangsar
Which of the following is NOT a machining process? /
Antara berikut yang manakah BUKAN proses pemesinan?
Milling / Penggilingan
Drilling / Penggerudian
Welding / Kimpalan
Grinding / Pengisaran
What is the purpose of a job description? / Apakah tujuan penerangan pekerjaan?
To advertise a job / Untuk mengiklankan pekerjaan
To describe skills and experience/ Untuk menerangkan kemahiran dan
pengalaman
To outline what is expected of the worker / Untuk menggariskan apa yang
diharapkan dari pekerja
To assign each worker to a suitable task/ Untuk menugaskan setiap pekerja untuk tugas yang sesuai
What does the ‘S’ in the OSHA stand for ? / Apakah maksud ‘S’ di OSHA?
Since / Sejak
Safety/ Keselamatan
Source/ Sumber
Standard/ Standard
What must be done at the end of the practical lesson? / Apa yang mesti dilakukan pada akhir pelejaran praktikal ?
Leave without tidying your space / Tinggalkan tanpa merapikan ruang anda
Wait until cleanliness comes and is clean / Tunggu sehingga kebersihan datang dan bersih
Sweep your bench and any machines you have used / Sapu bangku anda dan mesin yang pernah anda gunakan.
Through all the tools into the rubbish / Melalui semua alat ke sampa
What techniques should be use when filing and chamfering the metal rods?/ Teknik apa yang harus digunakan semasa mengisi dan mengacau batang logam?
File backwards and forwards quickly and gently./ Fail berulang-alik dengan cepat dan lembut.
File forwards and backwards slowly but firmly. / Fail ke hadapan dan ke belakang dengan perlahan tetapi tegas.
File in a sitting down position in short sharp bursts. / Fail dalam posisi duduk dalam letupan tajam pendek.
File forwards in one direction only and apply pressure./Failkan ke hadapan dalam satu arah sahaja dan beri tekanan.
When using the drill press, why should the work be clamped down securely ?/ Semasa menggunakan gerudi tekan, menggapa pekerjaan harus dijepit dengan aman ?
Makes life easier / Mempermudahkan hidup
So you can multitask / Supaya anda dapat melakukan pelbagai tugas
So you have both hands free./ Jadi and mempunyai kedua-dua tangan
So it doesn’t spin out of control / Oleh itu ia tidak berputar di luar kawalan
What are the machining operations that require vise inspection? /
Apakah operasi pemesinan yang memerlukan pemeriksaan ragum?
Boring.
Side mill.
Squaring.
Counter bore.
Why must wear an apron while carrying out practical work ?/ Mengapakah mesti memakai apron semasa menjalankan kerja praktikal ?
To keep it warm/ Agar sentisa panas
To make it look cool / Untuk menjadikannya kelihatan sejuk
More pockets to keep phone in / Lebih banyak poket untuk menyimpan telefon
To prevent loose clothing being caught in machinery / Untuk mengelakkan pakaian longgar terperangkap dalam mesin
Which of the following is NOT a hazard ? / Yang manakah BUKAN bahaya?
Wet concrete / Konkrit basah.
Back injuries / Kecederaan belakang.
Solvent vapors / Wap pelarut.
Falling object / Objek jatuh.
Which of the following is part of a micrometer ? / Yang manakah merupakan bahagian mikrometer ?
Jaws / Rahang
Micron / Mikron
Thimble / Bidal
Depth gauge / Tolok kedalaman
What is the most important safety aspect of any machine? /
Apakah aspek keselamatan yang paling penting bagi esin apa pun ?
The motor /Motor
The engine / Enjin
The ON / OFF button/ Butan hidup / mati
The 90 degree angle slide / Sliad sudut 90 darjah
What type of file shape is used to enlarge the hole? /
Apakah bentuk kikir yang digunakan untuk membesarkan lubang?
Round file / Kikir bulat.
Square file / Kikir segiempat sama.
Triangle file / Kikir segitiga.
Rectangle file / Kikir segiempat tepat.
What is the name of the cutting tool used in the drilling process? /
Apakah nama alat pemotong yang digunakan dalam proses penggerudian?
Knife / Pisau
Drill bit / Bit gerudi
Steel bit / Bit keluli
Drill holder / Pemegan gerudi
Open Die forgings is also known as ? / Tempaan Dai Terbuka juga dikenali sebagai?
Tom forging
Paul forging
John forging
Smith forging
When using the bench grinder. What is the first thing need to do before using it? / Semasa menggunakan penggiling bangku. Apakah perkara pertama yang perlu lakukan sebelum menggunakannya ?
The speed is set correctly / Kelajuan diatur dengan betul
The tool rest is set close to the stone/ Alat rehat diatur dekat dengan batu
All the guards are removed to gain access to wheel. / Semua pengawal dikeluarkan untuk mendapatkan akses ke roda.
The guards and rest are removed to gain access to the wheel / Pengawal dan rehat dikeluarkan untuk mendapatkan akses ke roda.
What is the function of a drilling machine in the workshop? / Apakah fungsi mesin penggerudian di bengkel ?
To cut the workpiece / Untuk memotong benda kerja
To joint the workpiece / Untuk menyatukan benda kerja
To create a round hole/ Untuk membuat lubang bulat
To produce smooth surface/Untuk menghasilkan pemukaan yang licin
Why is PPE the lowest form of hazard control ? / Mengapa PPE paling rendah daripada kawalan bahaya ?
Employees lose it / Pekerja kehilangannya
It is the most expensive / Ia adalah yang paling mahal
It is cheap and uncomportable / Ia murah dan tidak selesa
It requires constant consistent use by everyone / Ia memerlukan penggunaan berterusan yang berterusan oleh semua orang.
What should be use for 'marking out' metal (a type of metal pencil to draw on metal)? Apa yang harus digunakan untuk ‘menandakan logam’ (sejenis pensil logam untuk melukis logam)?
File / Fail
Plier /Tang
Scriber / Pencacai
Hammer / Tukul
What type of lab safety signs uses yellow triangle with black writing?
Fire
Warning
Prohibition
Mandatory
Which of the following is a defect in the rolling process? /
Yang manakah antara berikut merupakan kecacatan dalam proses penggelekan ?
Chipping / Chipping
Soldering / Pematerian
Scattering / Berselerak
Alligatoring / Alligatoring
What savings cost should be included to calculate the cost of making a product? / Kos simpanan apakah yang perlu dimasukkan sekali ketika membuat kira-kira kos bagi membuat sesuatu produk?
The cost to store raw materials in the bank /
Kos untuk menyimpan bahan mentah di dalam bank
The costs incurred by the seller to store products in the factory /
Kos yang ditanggung oleh penjual untuk meletakkan produk kilang
Costs should be made to provide comfort for shoppers to choose products /
Kos yang perlu dibuat untuk memberi keselesaan pembeli untuk memilih produk
The cost savings is the cost to be calculated to save the product before it is marketed /
Kos simpanan ialah kos yang perlu dikira untuk menyimpan produk sebelum ia dipasarkan
