Vehicle vibrations may result from all of the following EXCEPT:

Seals can develop leaks, which can cause bearings to _________.

On a worn rzeppa joint, the ball bearings roll into and out of the worn spot in the bearing races, making a popping noise.

Lack of lubrication will not usually result in failure of all the differential bearings, requiring a complete overhaul if the low fluid concern is not promptly addressed.

The ___________ is held on by a large nut that also sets the preload for the pinion gear on crush sleeve types.

Technician A says that when disassembling a differential case, it's good practice to first measure ring gear runout. Technician B says that when overhauling a differential, it's good practice to save the crush sleeve for reuse. Who is correct?

The differential ring gear rotates and drives the differential pinion.

The forces on the pinion gear are tremendous in that the driveshaft, which is connected to it, transmits the power to all of the following EXCEPT:

Tech A says when setting pinion bearing preload, the carrier assembly should be bolted into the axle. Tech B says setting pinion bearing preload is necessary to seat the pinion bearings. Who is correct?

Technician A says that in some all-wheel drive (AWD) vehicles, normally only the front wheels are driven. Technician B says that in some AWD vehicles, all four wheels are driven all of the time. Who is correct?

Newer designs in pickup trucks and SUVs use constant-velocity (CV) joint type front axles.

In a 4-wheel drive vehicle, final drives are found:

Select one:

When a vehicle's four-wheel drive is engaged, the drive is transmitted through both front and rear final drive assemblies, and differential action occurs in the _______.

Select one:

In all-wheel drive vehicles, only two of the wheels are normally powered, typically the rear wheels.

Choose the correct statement:

Select one:

______ transmits power to the front and rear drive axles at normal drive speed.

Select one:

In a part-time four-wheel drive vehicle, when two-wheel drive is selected, power is transferred to:

Select one:

While in four-wheel drive, if binding of the drivetrain it could be caused by:

Select one:

What are these?

What is this part?

What is this part?

What is this part?

What are these parts?

What is pictured here?