A hinged socket handle, also referred to as a ______, can be used when a ratcheting action is not needed.

Three basic shapes of shovel blades are round, square, and _____

What is the picture?

The sharp metal point at the end of the file called the _________, fits into the handle

A heavy-duty tool used to drive posts or other large stakes is a _____.

The proper angle for the edge of a cold chisel is _____.

A screw with a square head is a __________

Which of the following screws comes to a relatively sharp point at the base of its drive socket?

How many sides does a hexagonal shape have?

In what way is a spud wrench different from a pipe wrench?

To quickly run a nut onto a bolt that resists spinning it on with the fingers, you can drive the socket with a(n)

_____.

Another common name for lineman pliers is _____.

Because of its stiffness, a folding rule is better than a cloth or steel tape for measuring _____.

One situation that can make a measurement with a laser inaccurate is measuring to a _____.

When an object is plumb, it is _____.

In addition to level and plumb, some spirit levels can check a _____.

To check level conditions over a significant distance, such as a building foundation or longer distance, the best level to use is a _____.

Which of the following saws would likely have the fewest teeth per inch, resulting in the largest teeth?

The best designed saw for cutting miter joints is a _____.

When using a utility knife, place a piece of scrap material under the object you are cutting in order to _____.

The safest kind of utility knife is one with a _____.

Shovels typically have handles made of wood or _____.

Before using a pick, check to be sure that the head is _____.

A chain fall locks its elevated load in place using _____.

Cable come-alongs are used to move loads _____.

Because of the shape of its jaws, which clamp can spread clamping pressure over a wider area than the

others?

Witch claw hammer has a slightly convex face (rounded)?

What tool is used to indent metal to drill?

A __________ is utilized when a torque setting is specified for a particular bolt. Distance x Force

______________ are used to get into tight places where other pliers wont reach or to grip parts that are too small to hold with your fingers.

____________ has a concave blade to straighten the blade when it is extended.

________ is a battery-powered tape measure. Uses lasers.

A square that is shaped like an L.

_____________ is a handsaw blade that has the fewest teeth and is designed to cut wood across the grain.

If your hand saw starts to show rust, how would you clean/repair it?

How to store clamps?

A _______ is used for driving nails in drywall.

A ________ uses a length of pipe. It has a fixed jaw and a movable jaw that slides along the pipe.

_________ are used to mark long, straight lines on smooth surfaces.

What piece of equipment is designed to hook to a tool to keep it from falling and causing injury's to people below?

______ typically use a ratcheting action that forces the socket to rotate in one direction, while it freely spins in the other direction.

____________ forms a continuous perimeter around the head of a fastener.

A shovel that is designed to shape trenches or holes that need smooth, straight sides.

Files and Rasp are used to cut, smooth or shape metal or wood. Files have parallel teeth, while rasp have individual teeth that are more aggressave.