Font size
WorksheetsCJ's ultimate quiz - Week 9
Total questions: 40
Worksheet time: 23mins
Aside from the obvious damage to the door & fender, what else is probably damaged from this accident?
Rear Bumper
Suspension
A pillar
Front bumper
Why are cars that have been in a fire immediately deemed a total loss?
All the corrosion protection is burned off
Wire harnesses are often damaged
The metal body has been annealed and is now weaker
They aren't and they can be fixed!
What is the likely reason a customer would bring this car back to a body shop and have them fix it again?
The body lines don't line up
Wrong fender
Color match is poor
They gave them the wrong car
What is being measured in this image?
Panel gap
Paint thickness
Heat of the panel
The amount of pigment in the paint
What sort of tool is being used here to measure the hood opening of this vehicle?
(a)
What is happening in this photo?
A wheel alignment
Measuring the front of the vehicle
Pulling the frame
Dent repair
Aside from the body damage done to this vehicle, what is also damaged?
Wheel/Tire
Suspension
Exhaust system
Underglow lights
What is this an example of?
An acceptable repair
Auto body shop procedures
Poor panel fitment
Good gaps
What would cause this fender to shatter as it did, rather than dent?
It was really cold outside
Something hit it REALLY hard
Aliens
It's made of a composite material
What does this car have a ton of?
Caster
Toe
Positive camber
Negative camber
What sort of tool is being used to pull the edge of the fender out?
A fork
A body spoon
A screwdriver
Michael's old-timey toothbrush
Upon first contact, when writing an estimate for a customer, it is most important to:
Be friendly, respectful, and professional
Make sure your technician is getting extra labor time added in
Look good
Smell good
How are most auto body technicians paid?
Salary
Hourly
Flat-rate
Commission
What does "roughing out" a dent imply?
Shaping a dent quickly to its original shape, but not fully complete yet
Fixing a dent 100%
Metal finishing
Using a bigger than usual hammer
Why would you need to write to "blend" a panel in estimating?
The painter sucks at matching color
Your repair didn't go well
The painter needs to blend their color into the next panel to avoid a color-match issue
To beef up time on the sheet so the painter can get paid extra $
Is it necessary to remove a door to blend it?
Yes
No
Is it necessary to "de-trim" a door to blend it? (ie: take off door handle, belt molding, trim panel, etc.)
Yes
No
Which is more important?
Writing a thorough estimate
Writing an estimate quickly
As a technician, why is it good to look over the estimate before starting your repairs?
So you can make sure you're getting paid for everything you're doing
So you can decide whether or not you want to do the job
So you can make sure you're doing the correct repairs
So you know the customer's name
What is the name of the estimating software that most bodyshops use?
(a)
What is the name of the software that is available online to look up information on most cars?
(a)
What's the name of the weird guy in the tool room with the overalls and long hair?
(a)
Where can you rent the textbook for free for up to 24 hours at a time?
The internet
The city library
PCC library
The body shop area
How do you know if class has been cancelled due to inclement weather, or a sick instructor?
PCC emergency alerts
Your PCC email
my.pcc.edu
I will call/text you
If a car's battery is dead and you need to put it in neutral, what do you do?
Tow it
Move it using a jackstand
Find the shifter release button
Force the shifter into neutral using brute force
What is this an example of?
Aligning a fender
Fixing a bumper
Picking a dent
Hammer & dolly
What are these?
Dent fixing tools
Clip removal tools
Screwdrivers
Specialty brake tools
What tool is being used here to remove paint from this panel?
A buffer
A cut off wheel
A right angle die grinder
An eraser wheel
Which of these is a Torx screwdriver?
What is used to eliminate moisture from getting in between two welded panels?
Tape
Wax
Seam sealer
Weatherstripping
What is the corrosion protective coating called that vehicles are dipped in at the factory?
Primer
Surfacer
Adhesion promotor
E-coat
When working in a loud environment, you should wear hearing protection
True
False
What is the name of your advisor?
Jalissa
Julie
Joleen
Larisa
What is the name of your job placement specialist?
DeAnne Hardy
Princess Dianne
Bencharpon Saysouriyosack
CJ Mayo
What can be a dolly?
A dolly
A hammer
Pliers
A body spoon
If you're referring to the front-left of a left hand drive vehicle, is it different on a right hand drive vehicle?
Yes
No
Can a chrome truck bumper be repaired?
Yes
No
Can a painted metal truck bumper be repaired?
Yes
No
Why would you need to pre-pull heavy body damage before replacing a panel?
Because everything is welded together, and the panels behind might have shifted
To impress your boss
To practice making pulls
Because it's cool
Where is the best place to store windows/glass?
In the car
At your tool box
Near the frame rack
Somewhere they won't get damaged
