Font size
Worksheetswood shop final
Total questions: 49
Worksheet time: 47mins
Eye protection must be worn:
Only when working at a machine.
At all times when working in the woodshop.
When teacher reminds me.
Those students allowed to work in the shop are:
Anyone with previous experience
Only individuals that have completed their safety and training tests
Anyone that thinks they know how
Equipment and tools available for you to use are:
Only tools and machines that I have been instructed in how to use.
Any tool in the shop
Any tool or machine that I can figure out how to use.
Proper footwear for the woodshop is:
Work boots
Any type of shoe
Shoes must cover the toes, heel, and top of the foot
The FIRST priority when working at a machine is:
That I don't make any mistakes
That I watch other people around me
That I am always thinking about safety
On the band saw the guard should be set:
1/8" to 1/4" above the material.
Holding the material tight against the table.
Out of the way so you can see.
When holding material at the miter saw, the safety zone is:
Anywhere as long as I am holding it firmly.
As far away from the blade as possible.
4-6 inches away from the blade.
When using the air-powered nailer:
Pull the hose across the room to my bench.
Tell everyone to 'Stand back'.
Always hold nailer tight against the material.
I understand that if I do not follow the safety rules and procedures I will:
Greatly increase the possibility of injury.
Lose my privilege to work on machines.
All of the above.
possibly be removed from the room
When using the miter saw:
Hold the material as close to the blade as you can.
Keep the wood tight against the fence.
Hold the blade tight against the wood before you start the saw.
use the saw for rip cuts on a board
If you get injured but are still feeling ok, do you still need to report it?
Yes
No
Maybe
Choose the proper clothing for woodshop.
School lanyards
Open-toed shoes
Dangly jewelry
Rolled up sleeves and tucked in clothing
When using tools, it is best to choose the right tool for the job. This means the tool should NOT be forced as this could cause the tool to break.
True.
False.
If I see a classmate violating a safety rules, I can..
call them out loudly in a rude way
politely remind them to follow the safety rules
throw safety glasses at them
also ignore safety rules
The body of a tape measure can be added to an inside measurement for the correct reading.
True
False
The hook on a measuring tape moves back and forth, this allows for inside and outside measurements.
True
False
What is this measurement marked by the pen?
40 3/8"
3' 4 3/16"
3' - 5 13/16"
40 3/4"
What is the reading shown on the tape?
2' 4 3/4"
2' - 0 3/4"
24 11/16"
2' - 0 5/8"
What is the pictured measurement?
77 3/8"
76 7/8"
6' - 4 15/16"
6' 4 3/4"
the arrow indicates what measurement?
5 3/16"
4 3/4"
4 13/16"
4 3/4 '
About how many inches long is the leaf?
8 inches
7 inches
3 inches
4 inches
Identify this measurement in simplest form.
5"
5 1/4"
5 3/16"
5 5/16"
Identify this measurement in simplest form.
5 5/8"
5 1/2"
5 11/16"
5 9/16"
Maple, Birch, Oak and Walnut are all considered softwoods.
True
False
A face shield or goggles are not needed when you operate power tools
True
False
The try square is used for measuring and for checking right angles.
True
False
The Drill press should be started with the bit in contact with the work piece being drilled.
True
False
The lower the number on sand paper the rougher the abrasive paper.
True
False
To measure very long pieces of wood one should use the following:
Try square
ruler
Tape measure
2 foot ruler
level
A _____________ saw is a saw used to cut across the grain
table
circular
miter
jig
scroll
A _____________ saw is a saw used to rip along the grain
table
circular
miter
jig
scroll
A 45 degree cut is called a
Dado
Dovetail
Miter
what is the name of this tool?
jig saw
miter saw
track saw
what is the name of this tool?
table saw
scroll saw
jig saw
Identify the tool
sander
polisher
drill press
Identify the tool
hand sander
belt sander
orbital sander
bench sander
what is the measurement at the pencil
31 3/8
31 1/4
31 3/16
2 ft 7 3/8 in
what is the measurement at the pencil
29 5/8
30 3/4
29 3/4
30 9/16
what is the measurement at the pencil
24 5/8
23 3/4
24 3/4
24 5/8
what is the measurement at the pencil
29 5/8
29 3/8
29 3/4
30 5/8
what do you use to cut a groove the length of the board into wood
miter saw
jig saw
dado
circular saw
what type of wood is a fence picket board made from
oak
pine
cedar
maple
what type of wood is a 2x4 made from
oak
douglus fur
cedar
birch
what is an example of a hazard you might face in class
using a push stick on a table saw
wearing close toed shoes
saw dust on the floor
asking a questions when you aren't sure of something
For extra points on the final stand up and say " I must confess I am in love with " one of the names listed below. This is not required only for extra points
Sydney Sweeny
Chris Hemsworth
Zendaya
Tom Holland
Taylor Swift
For extra points complete 10 push ups or 10 squats, make sure I can see you complete them and the better the form the more point you get. this is not required only for extra points if you choose
push ups
squats
push-ups
Squats
For extra points slap the table and exclaim " I finally got that fly that has been bugging me all day"
This is not required only for extra points, do not slam your hand down to hard where you hurt yourself.
nailed it
Adios contaminos
squashed
bug no more
