NEW
Font size
Worksheets202 Boat-building Technology Quiz outcome 4
Total questions: 37
Worksheet time: 27mins
What is the method of boat building in which the edges of hull planks overlap each other?
Clinker-built
Carvel planking
Strip-planking
Stitch and glue
What is the derived unit for area?
m3
m2
Kg
m
What factor should be considered when measuring and marking out?
Weight
Flatness
Density
Temperature
Which work holding device is used for holding components in place during assembly, fitting, or connecting?
Vices
Cramps/clamps
Jigs
Chucks
What is the purpose of finishing in boat building?
Quality standards
Entertainment
Temperature control
Safety
What is the drafting technique used to generate curved lines in plans for streamlined objects such as aircraft and boats?
Lofting
Sawing
Planing
Drilling
What is the derived unit for volume?
m3
Kg
m2
m
Which factor affects material removal in boat building?
Dryness of material
smell of material
Shape of material
Color of material
What is the method of boat building that uses plywood panels temporarily stitched together and glued permanently with epoxy resin?
Clinker-built
Carvel planking
Strip-planking
Stitch and glue
What is the derived unit for mass?
m3
m
m2
Kg
What factor should be considered when measuring the length of a room?
Temperature
Flatness
Weight
Density
Which material is used for building large boats and is relatively cheap and easy to cut, bend, and weld?
Steel
Polyester
Aluminium
Wood
What is the method of boat building in which hull planks are laid edge to edge and fastened to a robust frame?
Strip-planking
Carvel planking
Stitch and glue
Clinker-built
What is the derived unit for density?
m
m2
m3
Kg/m3
What is the factor to be considered when measuring the angle of a room?
Weight
Flatness
Parallelism
Density
What is the derived unit for force?
N
Kg
m
m2
What is the method of boat building that involves the use of a single sheet of plywood to form the hull?
Stitch and glue
Carvel planking
Single-sheet plywood construction
Clinker-built
What factor should be considered when measuring the height of a room?
Temperature
Flatness
Perpendicularity
Density
What is the method of boat building in which the hull is constructed from length's of uniform of wood?
Strip-planking
Carvel planking
Stitch and glue
Clinker-built
What is the derived unit for energy?
J
Kg
m
m2
What factor should be considered when measuring the width of a room?
Temperature
Flatness
Weight
Density
What is the derived unit for power?
W
Kg
m
m2
What is the method of boat building that involves the use of a mold to shape the hull?
Molded construction
Carvel planking
Stitch and glue
Clinker-built
What factor should be considered when measuring the diameter of a cylindrical object?
Temperature
Roundness
Weight
Density
What factor should be considered when measuring the thickness of a wooden plank?
Temperature
Flatness
Weight
Density
What is the derived unit for pressure?
Pascal
Kg
m
m2
What is the method of boat building in which the hull is constructed from a single piece of wood?
Carving
Stitch and glue
Strip-planking
Clinker-built
What is the derived unit for speed on water?
mph
Kilos
knots
kph
What factor should be considered when measuring the depth of a hole?
Temperature
Flatness
Perpendicularity
Density
What is the derived unit for power?
Watt
Kg
m
m2
A construction worker measures a steel beam to be 3.45 meters long. However, the blueprints require the measurement to be recorded in millimeters. What is the length of the beam in millimeters?
34.5 mm
345mm
3450mm
0.00345mm
A small container has a volume of 1 cubic meter (1 m3). How many cubic millimeters (mm3) are in this container?
1000 mm3
100,000,000 mm3
1,000,000,000 mm3
1,000,000 mm3
To convert a measurement from cubic meters (m3) to cubic millimeters (mm3), you should move the decimal point how many places to the right?
3 places
9 places
6 places
12 places
A force of 2500 N is applied to an object. What is this force in kilonewtons (kN)?
A liquid has a volume of 0.75 m³. What is this volume in litres (L)?
The deck of a small boat has an area of 2.4 m². What is this area in cm²?
What is the main purpose of a technical drawing in boat building?
provide detailed specifications for construction.
