WorksheetsDriver Education: Chapter 12 Vehicle Maneuvers
Total questions: 1
Worksheet time: 34mins
After completing the chapter on Vehicle Maneuvers, what should the student be able to identify, describe, and perform?
Advanced driving techniques and highway driving rules
Pre-driving checks, pre-ignition control tasks, and starting procedures
Vehicle maintenance and repair procedures
Traffic signal programming and enforcement
What is the sequence of actions for any maneuver as described in the Basic Maneuvers section?
Evaluate, Execute, Prepare
Prepare, Evaluate, Execute
Evaluate, Prepare, Execute
Prepare, Execute, Evaluate
What does the 'Prepare' stage involve according to the Basic Maneuvers section?
Checking the situation for signs and road markings
Using the controls of the vehicle to perform the maneuver
Signaling your intentions and rechecking mirrors and blind spot
Looking where you want to go, guiding your vehicle, and verifying the turn signal is no longer activated
What is the purpose of the 'Evaluate' stage in the Basic Maneuvers section?
To use the vehicle controls to perform the maneuver
To signal your intentions and check that the maneuver can be performed safely
To examine the situation for signs and road markings, check for mirrors and blind spot, and decide whether to perform the maneuver
To guide the vehicle and verify the turn signal is no longer activated
During the 'Execute' stage, what should you look for while performing the maneuver?
The final stage of the maneuver
The initial conditions such as road markings and signs
Where you want to go, guiding your vehicle, and verifying the turn signal is no longer activated
The preparation and evaluation of the maneuver
Before entering traffic with an automatic transmission vehicle, what should you do after ensuring there is sufficient space to enter traffic?
Activate the turn signal and check the rear-view mirrors and the blind spot.
Immediately accelerate to merge with the traffic.
Honk to alert other drivers of your intention to enter traffic.
Shift to "P" Park position to prepare for entering traffic.
When preparing to start on an uphill slope, what is the purpose of releasing the brake pedal?
To check the functionality of the brake lights.
To signal other drivers that you are about to move.
To prevent a rollback by using the accelerator which causes the vehicle to pull forward.
To engage the automatic parking system.
What is the correct sequence of actions when entering traffic with an automatic transmission vehicle?
Apply brake pedal, shift to drive (auto "D"), release parking brake.
Shift to drive (auto "D"), apply brake pedal, release parking brake.
Release parking brake, apply brake pedal, shift to drive (auto "D").
Apply brake pedal, release parking brake, shift to neutral.
What is the first step in the procedure for entering traffic with a standard transmission vehicle?
Place the gear shift lever in first gear
Depress the brake and clutch pedal completely
Release the parking brake
Look towards your intended path of travel
When preparing to drive on a steep uphill slope with a standard transmission, what should remain engaged until the vehicle begins to pull forward?
The gas pedal
The clutch pedal
The parking brake
The brake pedal
According to the learning material, what is the absolute minimum following distance in ideal driving conditions for a novice driver?
One second time interval
Two second time interval
Three second time interval
Four second time interval
What should you do after raising the clutch pedal to the friction point when starting on a steep hill with a standard transmission?
Release the parking brake
Shift to first gear
Depress the clutch pedal completely
Lightly apply the gas while raising the clutch
What is the recommended action to take when you need to reduce speed while driving in traffic?
Re-apply the brake firmly without checking the rear view mirror
Tap the brake pedal, check the rear view mirror, and adjust your vehicle position accordingly
Accelerate and then apply the brake pedal smoothly
Use the hand signal and then apply the brake pedal
When you stop behind another vehicle, what minimum distance should you maintain?
At least two car lengths
At least one car length
At least half a car length
No specific distance is necessary
What does the space maintained when stopping behind another vehicle enable you to do?
Change lanes if the lane is blocked
Advance up a slope
Avoid carbon monoxide and hot exhaust
All of the above
What is the term used to describe the transfer of weight to the front of the vehicle, causing the hood to drop and the rear to rise?
Roll
Yaw
Pitch
Slide
When steering input transfers weight from one side of the vehicle to the other, what is this referred to as?
Yaw
Slide
Pitch
Roll
During a right turn, where does the weight of the vehicle transfer?
To the left, causing the vehicle to roll to the right
To the right, causing the vehicle to roll to the left
To the front, causing the vehicle to pitch forward
To the rear, causing the vehicle to pitch backward
What should a driver aim to minimize through precise movements of steering, acceleration, and braking?
Speed
Weight transfer
Fuel consumption
Engine noise
What is the simplest and safest method to park your vehicle according to the text?
Accelerate towards the parking space
Steer towards the curb from the lane beside the parked vehicles
Reverse into the parking space
Park parallel to the moving traffic
Before turning to park your vehicle, what should you do according to the steps provided?
Activate your turn signal and check the mirrors
Increase your speed and then turn
Honk to alert other drivers
Turn off your vehicle's engine
What should you do when the front of your vehicle reaches the space (front reference) while executing the parking maneuver?
Accelerate quickly
Steer away from the curb
Steer towards the curb
Stop immediately
According to the text, what technology can help the driver maintain or regain control of a vehicle with a higher center of gravity?
Anti-lock Braking System (ABS)
Traction Control System (TCS)
Electronic Stability Control (ESC) or ESP Systems
Cruise Control
What should be the position of your vehicle in the parking space once the maneuver is completed?
At an angle to the curb
Two feet away from the curb
Centered with about a foot of the curb
Parallel to the moving traffic
According to the image, what is the first step in the process of stopping, exiting, and securing the vehicle?
Release the brake pedal
Apply the brake
Shift the selector lever to P for Park
Remove the key
What should you do after applying the parking brake when stopping, exiting, and securing the vehicle?
Release the brake pedal
Shift the selector lever to P for Park
Turn off all accessories
Exit the vehicle
When preparing to back your vehicle, what speed should you control your movement at?
Normal driving speed
A snail's pace
As fast as possible
The speed of walking
What are you allowed to do before backing straight or into a right turn to facilitate turning?
Adjust the rearview mirror
Check your seatbelt
Remove the safety belt
Turn off the engine
Which of the following is NOT listed under the "EVALUATE" section for backing the vehicle?
Check in your mirrors.
Check all around your vehicle.
Are you permitted to reverse?
Turn off all accessories.
When backing straight, where should you place your left hand on the steering wheel?
At 6 o'clock
At 12 o'clock
At 9 o'clock
At 3 o'clock
What should you do after applying the brake pedal to start reversing slowly?
Release the parking brake if it is engaged
Check around your vehicle
Place your right hand at 12 o'clock on the steering wheel
Turn your torso and head to the right
When backing into a left turn, what should you be aware of regarding your vehicle?
The left front of your vehicle will swing out
The right front of your vehicle will swing out
The vehicle will move faster than usual
The vehicle will not require use of the accelerator
For a standard transmission vehicle, what should you use to control your speed when putting the vehicle in motion?
The gas pedal only
The brake pedal only
Both the clutch pedal and the gas pedal
The clutch pedal to control your speed
What should you do first when preparing to change lanes?
Signal your intention
Recheck traffic ahead
Adjust speed
Center your vehicle in the lane
What is the purpose of checking mirrors and blind spot during the lane change maneuver?
To adjust the rearview mirror
To ensure the maneuver is permitted
To signal other drivers
To check the flow of traffic in your new lane
When changing lanes on multi-lane roadways, what additional safety tip is suggested?
Use the turn signals only when you will be backing into a right or left turn.
Apply rear turning references when you steer where you wish to go.
Check your blind spot across the entire roadway.
Increase speed to match the flow of traffic.
According to the image, what should you do as you enter the driveway while backing in?
Shift to (D) Drive immediately.
Countersteer to straighten in the center of the driveway.
Activate the left turn signal.
Recheck traffic to the left and right.
What is the recommended action if you are using a driveway on your left?
Backing across a lane of traffic is recommended.
Reversing into a lane of traffic is safe if done quickly.
Backing across a lane of traffic or reversing into a lane of traffic should be avoided whenever possible.
Use the driveway on the left only if the traffic is clear.
What should you check for in both directions before reversing into the roadway from a driveway?
Traffic and hedges or other objects that may obstruct your vision
The color of the driveway
The weather conditions
The type of vehicles on the road
When preparing to use a driveway on the left, what should you activate?
The hazard lights
The right turn signal
The left turn signal
The headlights
What is the first step to execute when making a 3-point turn on the roadway?
Activate the right turn signal
Perform a right lane change and stop near the right edge of the road
Shift to (D) Drive
Aim at the center of the driveway
What should you do after steering toward the nearest lane when entering the first lane during a turnabout?
Accelerate to normal speed
Shift to (D) Drive and continue driving
Countersteer to straighten and then stop
Cancel the turn signal
Before performing a 3-point turn on the roadway, what should you check for regarding the road's characteristics?
If there are any potholes
If the road is wide enough and there are no hills, curves, or intersections nearby
The color of the road markings
The number of lanes
What should you activate before starting a 3-point turn on the roadway?
The left turn signal
The right turn signal
The hazard lights
The headlights
When performing a 3-point turn, at what speed should you reverse?
Normal driving speed
Walking speed
As fast as possible
Half the normal driving speed
Which of the following is NOT a question to evaluate before performing a U-turn?
Is a U-turn permitted?
Can you see 500 feet in both directions?
Is the road wide enough?
Do you have enough fuel in your vehicle?
What steering technique should be used when advancing slowly to execute a U-turn?
One-hand steering
Hand-over-hand steering
Push-pull steering
Palming the wheel
When driving in a high-risk or high-density traffic environment, what is considered a safer means of turning about if you cannot see clearly for at least 500 feet in both directions?
Making a U-turn immediately
Driving around the block
Turning at the next intersection
Stopping and waiting for a clear view
What is one of the key reasons parking requires excellent control of your speed and steering?
Parking is a high-speed maneuver
There is a high risk of collisions in parking situations
Parking is usually done on inclines
Steering is less important when parking
What should you do to diminish the risk when choosing to park your vehicle?
Always reverse into the parking space
Drive into and/or out of the parking space, rather than reversing, when possible
Park as quickly as possible
Ignore the position of nearby parked vehicles
When preparing to leave a diagonal parking space, what should you do after applying the service brake pedal?
Activate the left turn signal.
Shift to (D) Drive.
Activate the right turn signal.
Release the parking brake.
Before backing into a diagonal parking space, what should you assume the position for?
Backing into a left turn.
Backing into a straight line.
Backing into a right turn
What should you do just before stopping when executing the maneuver to leave a diagonal parking space?
Check the traffic in both directions.
Accelerate to normal speed.
Countersteer to straighten the wheels.
Cancel the turn signal manually.
When backing into a perpendicular space, what should you target?
The left side of the space
The center of the space
The right side of the space
The vehicle behind the space
What should you do before making a left turn into a parking space?
Activate the right turn signal.
Activate the left turn signal.
Increase speed and then turn.
Ignore the position of the vehicles on both sides of the space.
When driving into a perpendicular parking space, what is the final step before stopping?
Accelerate to normal speed.
Recheck your mirrors and blind spot.
Stop when your vehicle is aligned with the center of the space.
Turn on your headlights.
When executing a parallel parking maneuver, at what angle should your vehicle be in relation to the curb when you start to straighten the steering wheel?
15° to 20°
30° to 45°
60° to 75°
90°
What should you do before stopping during a parallel parking maneuver?
Accelerate to match the traffic flow
Honk to alert other drivers
Countersteer
Turn on the hazard lights
In Texas, what must you do when you leave your motor vehicle unattended on the side of the roadway?
Lock the vehicle and leave the engine running
Apply the parking brake, stop the engine, and turn the ignition switch to lock
Leave the parking brake disengaged and the engine running
Apply the parking brake and leave the keys in the ignition
What is the correct position of the front wheels when parking downhill with a curb?
Turned towards the near side of the road
Turned away from the curb
Parallel to the curb
Turned towards the far side of the road
How should the front wheels be positioned when parking uphill with a curb?
Turned towards the near side of the road
Turned away from the curb
Parallel to the curb
Turned towards the far side of the road
What should you do when parking uphill without a curb?
Turn the tires towards the near side of the road
Turn the tires away from the road
Keep the tires straight
Turn the tires towards the far side of the road
What technology assists drivers in parallel parking by controlling the steering movement automatically?
GPS navigation systems
Rearview cameras
Parking assist systems with sensors and controls
Manual steering control
