wayground logo

Free Printable Worksheets

Font size

S
M
L
XL
Worksheets

Health and Safety UK

Total questions: 90

Worksheet time: 45mins

Name
Class
Date
1.

Which organization sets out the health and safety regulations in the UK?

a)

City and Guilds

b)

Health and Safety Executive (HSE)

c)

National Health Service (NHS)

d)

British Safety Council

2.

Who is responsible for ensuring health and safety regulations are followed in the workplace?

a)

Employees only

b)

Employers only

c)

Both employees and employers

d)

Government inspectors

3.

What is the primary purpose of accident reporting procedures?

a)

To assign blame

b)

To ensure employees are punished

c)

To learn from mistakes and prevent future accidents

d)

To create paperwork

4.

Which of the following is NOT a type of hazard typically found in the workplace?

a)

Physical hazards

b)

Biological hazards

c)

Economic hazards

d)

Chemical hazards

5.

What is the correct procedure for reporting a hazard in the workplace?

a)

Informing a coworker

b)

Ignoring it if it seems minor

c)

Reporting it to a supervisor or manager

d)

Posting about it on social media

6.

Who should ensure that the workplace provides adequate health and welfare facilities?

a)

Employees

b)

Government agencies

c)

Employers

d)

Clients

7.

What should you do if you need to lift a heavy object?

a)

Bend your back to lift

b)

Lift with your legs

c)

Twist your body while lifting

d)

Lift alone without assistance

8.

Which equipment is commonly used for working at heights?

a)

Forklifts

b)

Step stools

c)

Ladders

d)

Office chairs

9.

What should you do before using electrical equipment?

a)

Read the instruction manual

b)

Plug it in and hope for the best

c)

Use it immediately if you're in a hurry

d)

Ignore any warning signs

10.

When should personal protective equipment (PPE) be worn?

a)

Only when the employer insists

b)

Only when you remember

c)

When hazards cannot be eliminated or adequately controlled by other means

d)

Never, it's uncomfortable

11.

What is one of the leading causes of workplace fires?

a)

Excessive paperwork

b)

Faulty electrical equipment

c)

Too much sunlight

d)

Plants

12.

In case of a fire, what are two things you should do?

Select TWO answers

a)

Call your family

b)

Evacuate immediately using the nearest exit

c)

Evacuate immediately using the nearest exit

d)

Finish your work first

e)

Raise the alarm

13.

What is the correct way to use a fire extinguisher?

a)

Point it at people

b)

Aim at the base of the fire and squeeze the handle

c)

Spray it randomly around the room

d)

Use it as a prop in a comedy sketch

14.

What type of fire is a Class A fire?

a)

Electrical fire

b)

Paper and wood fire

c)

Grease and oil fire

d)

Metal fire

15.

What is the purpose of a fire drill?

a)

To waste time

b)

To see how fast people can run

c)

To practice evacuation procedures

d)

To cause panic

16.

Who is responsible for ensuring fire exits are clear and accessible?

a)

The fire department

b)

Employees

c)

Employers

d)

Visitors

17.

What should you do if you discover a fire but the fire alarm has not been activated?

a)
Ignore the fire and continue with your activities
b)
Attempt to put out the fire yourself without assistance
c)
Lock the doors and prevent others from evacuating
d)
Activate the fire alarm, evacuate the building, and call the fire department.
18.

Which type of extinguisher is suitable for use on electrical fires?

a)
Powder extinguisher
b)
Foam extinguisher
c)
CO2 (Carbon Dioxide) extinguisher
d)
Water extinguisher
19.

Who should be trained in the use of fire extinguishers?

a)
Pets
b)
Only managers
c)
Children under 10 years old
d)
All individuals in a workplace or household
20.

How often should fire extinguishers be inspected?

a)
Every 5 years
b)
Twice a month
c)
Never
d)
At least once a year
21.

Which legislation outlines the requirement for employers to assess and manage risks to employees and others in the workplace?

a)
Occupational Safety and Health Act 1970
b)
Workplace Safety and Health Act 2006
c)
Health and Safety at Work etc. Act 1974
d)
Employee Safety and Protection Act 1985
e)

Management of Health and Safety at Work Regulations 1999

22.

What is the purpose of a risk assessment?

a)
To ignore potential risks
b)
To increase the likelihood of risks occurring
c)
To minimize the impact of risks
d)
To identify, analyze, and evaluate potential risks
23.

Who is responsible for conducting risk assessments in the workplace?

a)
Employer or designated health and safety officer
b)
Randomly selected customers
c)
Local government officials
d)
Employees' family members
24.

What is the correct procedure for reporting a workplace accident?

a)
Ignore the accident and continue working
b)
Blame a coworker for the accident
c)
Refuse to cooperate with any investigations
d)
Notify a supervisor, seek medical attention if necessary, fill out an incident report form, and cooperate with investigations.
25.

Who should be informed about a workplace accident?

a)
Family members of the injured employee
b)
Immediate supervisor, HR department, and relevant safety personnel
c)
Competitors of the company
d)
Coworkers who were not present during the accident
26.

Which of the following is NOT considered a hazard in the workplace?

a)

Wet floor

b)

Inadequate lighting

c)

Fire exit signs

d)

Toxic chemicals

27.

What is the correct procedure for dealing with hazardous substances?

a)
Ignore hazards, skip risk assessment, provide no training
b)
Implement control measures without identifying hazards
c)
Identify hazards, assess risks, implement control measures, provide training, monitor effectiveness
d)
Monitor effectiveness without providing training
28.

How can employees minimize the risk of back injuries when lifting heavy objects

a)
By using proper lifting techniques such as bending at the knees, keeping the object close to the body, avoiding twisting while lifting, and asking for help if the object is too heavy.
b)
By using only one hand to lift the object
c)
By lifting with a straight back
d)
By quickly jerking the object upwards
29.

When working at heights, what should be used to prevent falls?

a)
Umbrella
b)
Safety scissors
c)
Fall protection equipment
d)
Rubber duck
30.

What should be done if a piece of equipment appears to be damaged or faulty?

a)
Hide the damage to avoid trouble
b)
Try to fix it yourself without reporting
c)
Report it to the appropriate personnel or supervisor.
d)
Ignore it and continue using the equipment
31.

What is the purpose of wearing gloves as part of personal protective equipment (PPE)?

a)
To protect hands from exposure to hazards
b)
To prevent hair from getting dirty
c)
To improve grip while handling objects
d)
To keep hands warm in cold weather
32.

Which of the following is NOT a common cause of workplace fires?

a)
Leaving cooking equipment unattended
b)
Properly maintained fire extinguishers
c)
Faulty electrical wiring
d)
Improperly stored flammable materials
33.

In case of a fire, what should be done before opening a door?

a)
Check for heat
b)
Smell for smoke
c)
Taste the door handle
d)
Listen for music
34.

Which type of fire is a Class C fire?

a)
Paper fire
b)
Gas fire
c)
Chemical fire
d)
Electrical fire
35.

What should be done if a person's clothing catches fire?

a)
Jump into water
b)
Run around in circles
c)
Stop, drop, and roll
d)
Wave arms frantically
36.

Who should be responsible for checking fire escape routes regularly?

a)
Local government officials
b)
Construction workers
c)
Building owners or managers
d)
Tenants
37.

What is the correct procedure for evacuating a building during a fire?

a)
Remain calm, alert others, use the nearest exit, avoid elevators, stay low if there is smoke, gather at a designated meeting point outside the building.
b)
Run in the opposite direction of the fire
c)
Use the elevator to evacuate quickly
d)
Ignore the fire alarm and continue working
38.

What does the acronym "PASS" stand for in relation to using a fire extinguisher?

a)
Push, Activate, Stop, Stand
b)
Grab, Adjust, Secure, Stand
c)
Point, Activate, Secure, Stand
d)
Pull, Aim, Squeeze, Sweep
39.

Which type of fire extinguisher is suitable for use on flammable liquids?

a)
Class A
b)
Class D
c)
Class B
d)
Class C
40.

What is the primary purpose of emergency lighting?

a)
To provide illumination in case of power outage or emergency situations
b)
To provide background lighting for aesthetic purposes
c)
To create a cozy atmosphere in a room
d)
To guide people to the nearest exit during an emergency
41.

How often should emergency lighting systems be tested?

a)
Quarterly
b)
Yearly
c)
Bi-annually
d)
Monthly
42.

What should be provided for employees who work with computers to prevent eyestrain and musculoskeletal problems?

a)
Old furniture, irregular breaks, glare screens
b)
Uncomfortable chairs, bright lighting, no breaks
c)
Standing desks, dim lighting, no breaks
d)
Ergonomic furniture, regular breaks, proper lighting, and anti-glare screens
43.

What is the correct procedure for disposing of hazardous waste?

a)
Dumping it in a nearby river
b)
Throwing it in the regular trash
c)
Burying it in the backyard
d)
Identify, segregate, package, label, and arrange for proper disposal through a licensed facility.
44.

Who is responsible for ensuring employees receive adequate health and safety training?

a)
Government
b)
Supervisor
c)
Human Resources
d)
Employer
45.

What is the purpose of providing first aid facilities in the workplace?

a)
To provide entertainment for employees during breaks
b)
To ensure immediate treatment of injuries or illnesses and promote a safe working environment.
c)
To increase the risk of accidents in the workplace
d)
To discourage employees from seeking medical help
46.

How often should first aid kits be checked and restocked?

a)
Every 10 years
b)
Every 3-6 months
c)
Once a year
d)
Every 1-2 weeks
47.

What is the correct procedure for cleaning up a spill of hazardous chemicals?

a)
Mix different chemicals to neutralize the spill
b)
Wear PPE, contain spill, absorb chemicals, dispose of contaminated materials properly.
c)
Ignore the spill, it will evaporate on its own
d)
Use bare hands to clean up the spill
48.

Which of the following is NOT a common cause of workplace accidents?

a)
Excessive use of safety gear
b)
Inadequate safety equipment
c)
Poor lighting
d)

safety training

49.

What is the main purpose of conducting regular workplace inspections?

a)
To create unnecessary stress for employees
b)
To identify hazards, ensure compliance, prevent accidents, and promote safety.
c)
To increase employee workload
d)
To ignore safety regulations
50.

What is the main purpose of conducting regular workplace inspections?

a)
To increase employee workload
b)
To ensure workplace safety and compliance with regulations.
c)
To promote a culture of negligence
d)
To save time and resources by skipping safety measures
51.

When should respiratory protective equipment (RPE) be used?

a)
When you feel like it
b)
Only on weekends
c)
During a full moon
d)
When there are risks to health and safety that cannot be adequately controlled by other means.
52.

What is the purpose of providing training on manual handling techniques?

a)
To confuse workers and create chaos
b)
To make employees feel uncomfortable
c)
To prevent injuries and promote workplace safety
d)
To increase productivity by wasting time
53.

What is the correct procedure for lifting a heavy object from the floor?

a)
Use only one hand to lift the object, keeping your arm fully extended
b)
Lift the object quickly without paying attention to your posture
c)
Bend at the waist, keep your back rounded, grip the object loosely, and lift with your back
d)
Bend at the knees, keep your back straight, grip the object firmly, and lift with your legs while keeping the object close to your body.
54.

Which of the following is a common sign of ergonomic hazards in the workplace?

a)
Improved employee morale
b)
Increased productivity
c)
Enhanced job satisfaction
d)
Discomfort, pain, or numbness in the hands, wrists, arms, shoulders, neck, or back
55.

What should be done before operating machinery or equipment?

a)
Use equipment with missing parts
b)
Read the user manual, wear appropriate safety gear, and ensure the equipment is in proper working condition.
c)
Operate without training
d)
Ignore safety precautions
56.

How can employees contribute to fire safety in the workplace?

a)
By ignoring safety protocols and hazards
b)
By starting fires to practice fire safety
c)
By participating in fire drills, following safety protocols, keeping work areas clear of clutter, reporting potential hazards, and being trained in the proper use of fire extinguishers.
d)
By hoarding flammable materials in work areas
57.

What should be done if a fire door is wedged open?

a)
Ignore it
b)
Close the door immediately
c)
Paint the door
d)
Remove the door handle
58.

What is the main purpose of a fire risk assessment?

a)
To organize fire drills for entertainment purposes
b)
To ignore fire safety regulations
c)
To increase the risk of fire incidents
d)
To identify potential fire hazards, evaluate risks, and implement preventive measures.
59.

What is the purpose of a fire evacuation drill?

a)
To practice cooking skills
b)
To test the building's heating system
c)
To practice and prepare individuals for a safe evacuation in case of a real fire emergency.
d)
To see how fast people can run
60.

Which type of fire extinguisher is suitable for use on fires involving cooking oils or fats?

a)
Class C
b)

Class F

c)
Class B
d)
Class A
61.

What should be done if a person is in shock following an accident?

a)
Leave the person alone
b)
Give them a hot drink
c)
Shake them to wake them up
d)
Keep the person warm, calm, lying down with legs elevated, and call emergency medical services.
62.

How can the risk of slips, trips, and falls in the workplace be minimized?

a)
Ignoring maintenance of walkways
b)
Implement measures such as keeping walkways clear, using non-slip mats, ensuring proper lighting, providing training on safe practices, and promptly fixing any hazards.
c)
Using slippery materials for flooring
d)
Encouraging employees to wear high heels
63.

What is the purpose of an emergency action plan?

a)
To create a fun activity for employees
b)
To confuse people during emergencies
c)
To establish procedures for emergencies
d)
To waste time during work hours
64.

What should be done if a person is choking and unable to breathe or speak?

a)
Perform CPR immediately.
b)
Perform the Heimlich maneuver.
c)
Pat the person on the back forcefully.
d)
Offer the person a glass of water.
65.

What is the main purpose of providing safety signs in the workplace?

a)
To alert individuals of potential hazards and promote a safe work environment.
b)
To increase workplace productivity
c)
To confuse individuals about safety procedures
d)
To provide decoration in the workplace
66.

What is the purpose of an ergonomic assessment?

a)
To provide snacks in the workplace
b)
To reduce employee vacation time
c)
To increase the number of meetings
d)
To evaluate the workplace environment and ensure it fits the needs of the employees.
67.

Which of the following is NOT a common safety precaution when working with machinery?

a)
Ignoring safety guards or procedures
b)
Following safety guidelines
c)
Regularly maintaining machinery
d)
Wearing appropriate safety gear
68.

What should be done if a person is experiencing an electric shock?

a)
Pour water on the person
b)
Leave the person alone
c)
Try to move the person
d)
Disconnect power source and call for medical help
69.

What is the purpose of using a safety harness when working at heights?

a)
To improve posture while working
b)
To prevent falls and minimize the risk of serious injuries or fatalities.
c)
To increase speed and efficiency
d)
To enhance visibility in low light conditions
70.

When working on scaffolding, what should be done to prevent falls?

a)
Wear a harness and connect it to a secure anchor point, install guardrails around the perimeter of the scaffolding platform.
b)
Ignore safety gear and precautions
c)
Work alone without any safety measures
d)
Jump off the scaffolding if it starts to collapse
71.

What is the correct procedure for using fall arrest equipment?

a)
Attach to unstable anchor point
b)
Use equipment without proper fit
c)
Inspect the equipment, ensure proper fit, attach to secure anchor point, use shock-absorbing lanyard or self-retracting lifeline.
d)
Skip equipment inspection
72.

What is the purpose of a ladder safety check before use?

a)
To ensure the ladder is safe and in good condition.
b)
To check the ladder's color
c)
To test the weight capacity of the ladder
d)
To ensure the ladder is made of wood
73.

How should materials and tools be transported when working at heights?

a)
Use a unsecured rope
b)
Use a hoist or pulley system
c)
Throw them down to the ground
d)
Carry them by hand
74.

What should be done if adverse weather conditions are forecasted while working at heights?

a)
Postpone the work until the weather improves.
b)
Continue working as planned
c)
Ignore the weather forecast
d)
Take a break and resume work later
75.

What is the purpose of insulation on electrical wires and cables?

a)
To improve the aesthetic appearance of the wires
b)
To make the wires more flexible
c)
To increase the conductivity of the wires
d)
To prevent electrical shocks, fires, and short circuits.
76.

How should damaged electrical cords or cables be handled?

a)
Tape the damaged area and continue using the cord
b)
Ignore the damage and keep using the cord
c)
Throw the damaged cord in the trash without unplugging it
d)
Unplug and replace damaged electrical cords or cables.
77.

What is the minimum safe distance to maintain from overhead power lines?

a)
5 feet
b)
10 feet
c)

16.4 feet

d)
20 feet
78.

How should electrical equipment be inspected before use?

a)
Visually inspect for damage, wear, defects, frayed cords, exposed wires, broken plugs, proper grounding, and functioning safety features.
b)
Check the equipment's weight
c)
Listen for any strange sounds coming from the equipment
d)
Smell the equipment for any unusual odors
79.

What is the purpose of using a residual current device (RCD) with electrical equipment?

a)
To reduce electromagnetic interference
b)
To increase energy efficiency
c)
To quickly disconnect power in case of leakage current
d)
To improve signal strength
80.

What should be done if a person receives an electric shock?

a)
Disconnect the power source and seek medical help if needed.
b)
Apply more electric shock
c)
Ignore the situation and continue working
d)
Pour water on the person
81.

What is the purpose of using insulated tools when working with electricity?

a)
To increase the risk of electric shock
b)
To make the tools heavier
c)
To prevent electric shock or short circuits
d)
To improve the efficiency of the tools
82.

What should be done if a circuit breaker repeatedly trips?

a)
Unplug all devices from the circuit, reset the breaker, and plug in devices one by one to identify the problematic one. If issue persists, consult a professional electrician.
b)
Pour water on the circuit breaker to cool it down
c)
Ignore the issue and continue using the circuit
d)
Replace the circuit breaker with a larger one
83.

How should electrical equipment be stored when not in use?

a)
Store electrical equipment in a wet and humid location.
b)
Store electrical equipment in a dry and secure location, away from moisture and extreme temperatures.
c)
Keep electrical equipment near flammable materials.
d)
Place electrical equipment in direct sunlight.
84.

How should a ladder be positioned to ensure stability when working at heights?

a)
Position the ladder on an uneven surface
b)
Extend the ladder just enough to reach the landing point
c)
Place the ladder at a 90-degree angle from the ground
d)
Position the ladder on a firm, level surface and ensure the ladder is at the correct angle, approximately 75 degrees from the ground. Extend the ladder at least 3 feet above the landing point for stability.
85.

What is the primary purpose of a tool lanyard or tether when working at heights?

a)
To improve the visibility of the tools
b)
To increase the weight of the tools
c)
To provide a comfortable grip for the worker
d)
To prevent tools from falling and causing injury to workers below
86.

Why is it important to assess weather conditions before working at heights?

a)
To enjoy the view from a higher perspective
b)
To test the durability of equipment
c)
To ensure the safety of workers and reduce the risk of accidents or injuries.
d)
To challenge workers' fear of heights
87.

When should a fall protection system be used when working at heights?

a)
When working at heights of 6 feet or more above a lower level.
b)
When working indoors.
c)
When working at heights of 3 feet or more above a lower level.
d)
Only when working on ladders.
88.

How should electrical equipment be protected from water or moisture?

a)
Wrap the equipment in a wet towel
b)
Expose the equipment to direct water streams
c)
Store the equipment in a damp environment
d)
Use waterproof enclosures, covers, or sealants to protect electrical equipment from water or moisture.
89.

What is the purpose of using lockout/tagout procedures when working with electrical equipment?

a)
To improve the efficiency of electrical systems
b)
To ensure proper de-energization and prevent accidental startup
c)
To reduce the need for maintenance
d)
To increase the speed of equipment operation
90.

How should electrical equipment be disconnected before maintenance or repair work?

a)
Unplug the equipment without verifying de-energization
b)
Use the equipment with the power source still on
c)
Turn off the power source but skip locking it out
d)
Turn off the power source, lock out the power source, and verify de-energization with a voltage tester.

Similar Resources on Wayground

CHAPTER 07 1430.16G

89 questions

CHAPTER 07 1430.16G

quiz

Worksheet

•

12th Grade

Tiếng Anh

90 questions

Tiếng Anh

quiz

Worksheet

•

9th - 12th Grade

Konsep Dasar HAM

90 questions

Konsep Dasar HAM

quiz

Worksheet

•

12th Grade

De tocho morocho

85 questions

De tocho morocho

quiz

Worksheet

•

1st - 12th Grade

Cuestionario Grado 8° Período II

88 questions

Cuestionario Grado 8° Período II

quiz

Worksheet

•

6th Grade - University

Quiz Belum Berjudul

85 questions

Quiz Belum Berjudul

quiz

Worksheet

•

12th Grade