WorksheetsConstruction for Machine Operation Safety Test 2024
Total questions: 13
Worksheet time: 7mins
Always be sure you have the teacher’s approval to operate a machine. Never use a tool if you are not sure how to use it.
True
False
Feed the work carefully and only as fast as the machine will cut it easily.
True
False
You are the one to control the operation. Start and stop the machine yourself.
True
False
Sand only on the side of the disk sander that is moving ______________ toward the table.
Down
Up
To the left
To the right
Always use a ________ ________ when ripping stock that cannot be fed safely by hand.
Your fingers
Another piece of lumber
a buddy
Always hold the stock ________________ against the fence and tight to the table when ripping.
Flat and firm with hand in line with cutting area
Loose with hand in line with cutting area.
Flat and firm with hand not in line with cutting area
Loose and sloppy against the fence
The operator must push the stock all the way through the __________ before letting go of the board.
cutting area
Table
tape
It is not necessary to think through the operation before performing it.
False
True
Make all necessary adjustments before turning on the machine.
True
False
Wear appropriate clothing. Remove coats, sweatshirts, jewelry, ties, roll up loose
sleeves, and pull back long hair.
False
True
When using the machines, safety glasses are worn at all times.
True
False
It is not necessary to allow the machine to reach its full operating speed before starting to feed the work.
False
True
Do not allow your attention to be distracted while operating the machine.
False
True
