What are the two types of steel temperatures gauges?

Condensation occurs when ____________ is reached

If a painting inspector is not available environmental conditions should be checked ____________

What situation would cause environmental condition checks to be more frequent?

If the temperature of a steel structure falls during the night there is a risk of ____________

Information on relative humidity, dew point and overcoating times are shown on ____________

The environmental condition criteria should be found in the?

Dew point can be calculated from ____________

Which of the steel temperature gauges, magnetic and digital will give almost instantaneous results?

Currently NACE and ____________ produce joint standards

The Norsok M501 standard is mainly used in the ____________ industry

What does BS stand for?

What does ISO stand for?

What does SSPC stand for?

What does NACE stand for?

What does ASTM stand for?

ISO standards are compiled by ____________

An SSPC standard that is universally adopted for dry film thickness is ____________

An ISO standard widely specified for surface preparation is ____________

Which SSPC standard is for industrial blast cleaning?

In SSPC Vis 1 which rust grade contains both millscale and rust?

NACE and SSPC have how many levels of surface preparation by abrasive blast cleaning?

Visual standards and guides exist for Waterjetting?

The SSPC standard for power tool cleaning to bare metal is ____________

The main visual standard for surface preparation used in Europe is?

How many rust grades are within ISO 8501?

What is the missing standard from the list SA1, SA2, SA3?

Very thorough hand and power tool cleaning is designated?

How is the visual standard to be used?

The process of checking that the work is carried out in accordance with the specification is called?

The paint specification usually forms part of a contract

If there is no paint specification the ____________ should be referred to for application details.

The document that details why and how inspections are conducted is called?

The ____________ of the paint specification should be checked to confirm it is the current edition

The paint specification may specify selective coating manufacturers

The paint specification usually specifies the standard of preparation

Paint specification should have a revision status

Paint specifications often refer to standards such as ISO, ASTM etc.

Environmental conditions, film thickness, types of equipment, standards, mixing, storage are a few items to be found in a typical paint specification

The ____________ is also called resin, vehicle or polymer

Solvents can be organic or ____________ based

____________ provide colour and opacity together with durability, hardness, mechanical strength and in some cases rust inhibiting or antifouling properties, what am I?

The ____________ impart adhesion and strongly influences properties such as gloss, durability, flexibility, and toughness

The ____________ impart adhesion and strongly influences properties such as gloss, durability, flexibility, and toughness

An example of a pigment with a laminar structure is ____________

Paints are often referred to by the type of ____________

Pigments, extenders, resin, ____________ and additives are mixed together to form a paste

All Coatings should have a ____________ Number

Pigments ____________

Paint mills are used to ____________ during paint manufacture

Information on the voltage to be used for porosity testing should be obtained from ____________

I am a Intrinsically safe. (no batteries) type gauge

Calibrated thickness shims should be used with DFT gauges before use

The coating applicator should carry out ____________ tests during application

Wet film combs are available in steel, aluminium and ____________

Plastic combs are generally 'used ____________ ' only as the paint/solvent can melt the plastic

Electronic steel temperature gauges can be used ____________

Steel temperature gauges need ____________ to ____________ minutes to stabilize before use

Dew meters will measure steel temperature, relative humidity and ____________ point

A surface profile gauge measures the?

The documentation on a coatings job is generally completed by the?

The coating specification should be available to ____________

It is vitally important to keep a site ____________ or logging information on events

A Site diary can be used in the event of a ____________

Environmental conditions shall be recorded where?

Inspection equipment should have a unique identity number to assist with ____________

The daily inspection report should be signed and ____________

Overcoating times and curing times are available on the ____________

The Plant and equipment should be logged on a ____________ basis

To enable planning of the work an up to date ____________ should be maintained

The standard contains four languages English, French, Swedish and __________?

The standard is to be used for __________ assessment of rust grades and surface preparation grades?

The standard includes _______ high quality photographs of rust grades, abrasive blast cleaned grades and hand and power tool cleaning grades?

Photographic illustrations include flame _________ preparation?

24 blast cleaned photographs were taken from the original___________Standard SIS 05 59 00 – 1967?

How many rust grades exist in the standard?

Steel surfaces largely covered with adhering mill scale but little, if any, rust, which grade am i?

Steel surface on which the mill scale has rusted away and on which general pitting is visible under normal vision, which grade am i?

All surface preparation standards are prefixed Sa, __ and F1?

All blast inspection should be conducted without magnification?

ISO 8501 specifies a series of preparation grades for steel surfaces after _________ removal of previous paint coatings?

ISO 8501 is applicable to surfaces prepared for painting by methods such as blast cleaning, hand and power tool cleaning and machine ____________?

The degree of degradation which may be found on previously coated surfaces shall be assessed in accordance with ISO _______, Parts 1 to 6?

Each preparation grade is designated by the appropriate letter Sa, St or ______?

Surface preparation by localised blast cleaning is designated by the letters __ Sa.?

The adhesion of existing coatings may be checked by knife, by a cross-cut test or a portable apparatus for pull -off adhesion.?

The newly applied coatings should be __________ with the existing coatings.?

Iron oxide shop primer prior to surface preparation with localised blast cleaning, what am i?

P Ma picture shows typical cases of localised machine abrading using repair work to ______ in a power station.?

P Ma picture shows typical case of localised machine abrading repair work to the upper sides of a _______cover.?