NEW
Font size
Worksheets10
Total questions: 31
Worksheet time: 16mins
The AVT unit consists of:
one section;
two sections;
three sections;
four sections;
five sections.
The feedstock for the catalytic reforming unit is:
gasoline fractions;
kerosene fractions;
diesel fractions;
fuel oil;
liquefied petroleum gas.
Hydraulic machines that convert mechanical energy into energy of moving liquid are called:
compressors;
pumps;
separators;
reactors;
turbines.
The compression ratio in compressor machines is:
Ratio of inlet pressure p1 to outlet pressure p2;
Ratio of outlet pressure p2 to inlet pressure p1;
Difference between inlet pressure p1 and outlet pressure p2;
Difference between outlet pressure p2 and inlet pressure p1;
Sum of p1 and p2.
Smoke is a system consisting of:
two mutually soluble liquids;
gas and dispersed solid particles;
liquid with suspended solid particles;
two mutually insoluble liquids;
gas and vapor.
The driving force of heat exchange is:
difference in concentration;
temperature difference;
not dependent on temperature difference;
choice of heat exchanger design;
pressure difference.
The bottom product of a distillation column is:
high-boiling component;
low-boiling component;
heat carrier;
both low- and high-boiling components;
inert gases.
A set of scheduled maintenance works to ensure normal equipment operation until the next scheduled repair is called:
capital repair;
current repair;
emergency repair;
medium repair;
preventive inspection.
Tray repair in a distillation column is carried out:
without dismantling;
with mandatory dismantling;
in any way;
dismantling only in winter;
only with replacement.
A pipeline can be put into operation only after:
external inspection;
internal inspection;
technical certification;
both external and internal inspection;
pressure test.
Name the paraffin hydrocarbons:
propane;
cyclobutane;
benzene;
ethylene;
acetylene.
Identify the quality parameter not regulated in gasoline:
cetane number;
fractional composition;
sulfur content;
octane number;
density.
Name the substance that breaks emulsions:
emulsifier;
demulsifier;
dehydrator;
electro-dehydrator;
solvent.
Light oil products in the AVT unit are distilled at:
atmospheric pressure;
elevated pressure;
vacuum;
any pressure;
critical pressure.
What is the octane number of gasoline from catalytic reforming?
50;
60;
90;
80;
95.
A centrifugal pump with a horizontally placed shaft is called:
horizontal;
vertical;
inclined;
perpendicular;
axial.
Machines for compressing and moving gases are called:
compressors;
pumps;
separators;
reactors;
fans.
Foam is a system consisting of:
two mutually soluble liquids;
liquid and gas bubbles;
liquid with suspended solids;
two mutually insoluble liquids;
gas and vapor.
Heat carrier saving is achieved in:
parallel flow;
counter flow;
cross flow;
independent of flow direction;
spiral flow.
A simple column separates into:
three components;
four components;
two components;
six components;
one component.
Scheduled maintenance involving complete dismantling and replacement of all worn parts is called:
capital repair;
current repair;
emergency repair;
medium repair;
overhaul.
After repair of the distillation column, tray installation is done:
from top to bottom;
from bottom to top;
simultaneously from top and bottom;
every other tray;
diagonally.
Test pressure should exceed working pressure by:
1.5–2 times;
3.5–4 times;
5.5–6 times;
8–10 times;
10–12 times.
Name aromatic hydrocarbons:
propane;
cyclobutane;
benzene;
octane;
butane.
The octane number of gasoline increases with the addition of:
normal paraffin hydrocarbons;
olefin hydrocarbons;
aromatic hydrocarbons;
hydrogen;
water.
What is the first process unit crude oil enters at the refinery?
AVT;
stabilization;
ELOU;
catalytic cracking;
hydrotreater.
Heavy petroleum products in the AVT unit are distilled at:
atmospheric pressure;
elevated pressure;
vacuum;
any pressure;
supercritical pressure.
The greater the volumetric feed rate in catalytic reforming, the conversion depth is:
higher;
lower;
unchanged;
doubled;
stopped.
If two impellers are mounted on the shaft of a centrifugal pump, the pump is called:
multistage;
three-stage;
two-stage;
single-stage;
axial-flow.
Compressor machines are used to move:
liquids;
gases;
emulsions;
smoke;
solids.
Suspension is a system consisting of:
two mutually soluble liquids;
liquid and gas bubbles;
liquid with suspended solids;
two mutually insoluble liquids;
gas in solid medium.
