WorksheetsBU 1 (CHAPTER 2 - PART1)
Total questions: 86
Worksheet time: 14mins
Name
Class
Date
1.
SECTION 201 - GENERAL For the purpose of this Code, the following terms shall bear the (a) indicated in this Chapter.
2.
ABS MEANS
(a)
3.
____ any public space. public park or thoroughfare less than three (3) meters but not less than two (2) meters in width dedicated or deeded for public use.
a)
ALLEY
b)
ALTER or ALTERATION
c)
ACCESSIBLE
d)
AIRBREAK
4.
____ any change, addition or modification i.1
construction or occupancy.
a)
ALLEY
b)
ALTER or ALTERATION
c)
ACCESSIBLE
d)
AIRBREAK
5.
when applied to a fixture, connection, appliance or
equipment, shalt mean having access thereto, but which may require prior removal of an access panel, door or similar obstruction.
"Readily accessible" shall mean direct access without the necessity of removing any panel, door or similar obstruction.
a)
ALLEY
b)
ALTER or ALTERATION
c)
ACCESSIBLE
d)
AIRBREAK
6.
Accessible when applied to a fixture, connection, appliance or equipment, shalt mean having access thereto, but which may require prior removal of an access panel, door or similar obstruction.
"_______ ______" shall mean direct access without the necessity of removing any panel, door or similar obstruction.
(a)
7.
_____ a physical separation. which may be a low inlet into the indirect waste receptor from the fixture, appliance or device indirectly connected.
a)
ALLEY
b)
ALTER or ALTERATION
c)
ACCESSIBLE
d)
AIRBREAK
8.
the unobstructed vertical distance through the free atmosphere between the lowest opening from any pipe, plumbing fixture, appliance or appurtenance conveying waste to the flood level rim of the receptor.
a)
AIR GAP, DRAINAGE
b)
AIR GAP, WATER DISTRIBUTION
c)
APPROVED
d)
APPROVED TESTING AGENCY
9.
_____ an unobstructed vertical distance through the free atmosphere between the lowest opening from any pipe or faucet conveying potable water to the flood-level rim of any tank, vat or fixture.
a)
AIR GAP, DRAINAGE
b)
AIR GAP, WATER DISTRIBUTION
c)
APPROVED
d)
APPROVED TESTING AGENCY
10.
accepted or acceptable under an applicable specifications or standard stated or cited in this Code., or accepted as suitable for any proposed use under procedures and powers of the Administrative
Authority.
a)
AIR GAP, DRAINAGE
b)
AIR GAP, WATER DISTRIBUTION
c)
APPROVED
d)
APPROVED TESTING AGENCY
11.
an organization primarily established for purposes of testing to approve standards and approved by the Administrative Authority.
a)
AIR GAP, DRAINAGE
b)
AIR GAP, WATER DISTRIBUTION
c)
APPROVED
d)
APPROVED TESTING AGENCY
12.
The Administrative Authority including the Building Official, the Commission, the Board and such other department or agency established and authorized to administer and enforce the provisions of Republic Act 13 78 - The Plumbing Code of the Philippines, Presidential Decree No. 223;
a)
AUTHORITY, ADMINISTRATIVE
b)
BACKFLOW
c)
BACKFLOW CONNECTION
d)
BACKPRESSURE BACKFLOW
13.
the flow of water or other liquids, mixtures or substances into the distributing pipes of a potable supply of water from any source other than from its intended source.
a)
AUTHORITY, ADMINISTRATIVE
b)
BACKFLOW
c)
BACKFLOW CONNECTION
d)
BACKPRESSURE BACKFLOW
14.
condition or any arrangement whereby reverse flow can occur.
a)
AUTHORITY, ADMINISTRATIVE
b)
BACKFLOW
c)
BACKFLOW CONNECTION
d)
BACKPRESSURE BACKFLOW
15.
occurs due to an increased reverse pressure above the supply pressure. This may be due to pumps, boilers, gravity or other sources of pressure.
a)
AUTHORITY, ADMINISTRATIVE
b)
BACKFLOW
c)
BACKFLOW CONNECTION
d)
BACKPRESSURE BACKFLOW
16.
device or means to prevent flow of liquid from returning to the source of supply. Also called vacuum breaker.
a)
BACKFLOW PREVENTER
b)
BACK-SIPHONAGE
c)
BACKWATER VALVE
d)
BACKVENT PIPE
17.
the flowing back of used, contaminated or polluted water from a plumbing fixture or vessel into a water supply pipe due to a negative pressure in such pipe. See backflow.
a)
BACKFLOW PREVENTER
b)
BACK-SIPHONAGE
c)
BACKWATER VALVE
d)
BACKVENT PIPE
18.
a device installed in a drainage system to
prevent reverse flow.
a)
BACKFLOW PREVENTER
b)
BACK-SIPHONAGE
c)
BACKWATER VALVE
d)
BACKVENT PIPE
19.
the part of a vent line, which connects directly with
an individual trap underneath or behind the fixture and extends to the branch or main vent pipe at any point higher than the fixture or fixture traps
it serves. This is sometimes called an individual vent. See Revent pipe.
a)
BACKFLOW PREVENTER
b)
BACK-SIPHONAGE
c)
BACKWATER VALVE
d)
BACKVENT PIPE
20.
a valve opened and closed by the fall and rise, respectively, of an attached ball floating on the surface of the liquid.
a)
BALL COCK
b)
BALL, JOINT
c)
BATHROOM
d)
BATTERY OF FIXTURES
21.
a type of pipe connection in which a ball-shaped end is held in a cuplike shell and allows movements in every direction.
a)
BALL COCK
b)
BALL, JOINT
c)
BATHROOM
d)
BATTERY OF FIXTURES
22.
a room equipped with a shower stall or bathtub.
a)
BALL COCK
b)
BALL, JOINT
c)
BATHROOM
d)
BATTERY OF FIXTURES
23.
any of two or more similar adjacent fixtures which discharge into a common horizontal soil or waste branch.
a)
BALL COCK
b)
BALL, JOINT
c)
BATHROOM
d)
BATTERY OF FIXTURES
24.
that portion of a pipe which, for a short distance, is
sufficiently enlarged to receive the end of another pipe of the same diameter for the purpose of making rt caulked or push-on joint
a)
BELL OR HUB
b)
BENDING PIN (or IRON)
c)
BIBB
d)
BIDET
25.
a tool for straightening or bending lead pipe.
a)
BELL OR HUB
b)
BENDING PIN (or IRON)
c)
BIBB
d)
BIDET
26.
synonymous with faucet, cock, tap, plug, etc.
The word "faucet" is preferred.
a)
BELL OR HUB
b)
BENDING PIN (or IRON)
c)
BIBB
d)
BIDET
27.
A plumbing fixtures used for washing the middle private part of the body, especially the genitals. Also called a "sitz" bath.
a)
BELL OR HUB
b)
BENDING PIN (or IRON)
c)
BIBB
d)
BIDET
28.
Bidet is a plumbing fixture used for washing the middle private part of the body, especially the genitals. Also called a " (a) " bath.
29.
BIBB Is a synonymous with faucet, cock, tap, plug, etc. The word " (a) " is preferred.
30.
A pipe flange that is not drilled for bolt holes.
a)
BLANK FLANGE
b)
BLIND FLANGE
c)
BLOW·OFF
d)
BOARD
31.
a flange that closes the end of a pipe. There is no opening for the passage of liquid or gas.
a)
BLANK FLANGE
b)
BLIND FLANGE
c)
BLOW·OFF
d)
BOARD
32.
a controlled outlet of a pipeline to discharge liquid or detritus.
a)
BLANK FLANGE
b)
BLIND FLANGE
c)
BLOW·OFF
d)
BOARD
33.
the Licensure Board for Master Plumbers
a)
BLANK FLANGE
b)
BLIND FLANGE
c)
BLOW·OFF
d)
BOARD
34.
a valved outlet of a boiler that permits discharge
of accumulated sediment.
a)
BOILER BLOW-OFF
b)
BRANCH
c)
BRANCH INTERVAL
d)
BRANCH, FIXTURE
35.
any part of the piping system other than a main, riser or stack
a)
BOILER BLOW-OFF
b)
BRANCH
c)
BRANCH INTERVAL
d)
BRANCH, FIXTURE
36.
a length of soil or waste stack corresponding in
general to a story height, but in no case less than 2.43 meters within which the horizontal branches from one floor or story of a building are connected to the stack
a)
BOILER BLOW-OFF
b)
BRANCH
c)
BRANCH INTERVAL
d)
BRANCH, FIXTURE
37.
see Fixture Branch
a)
BOILER BLOW-OFF
b)
BRANCH
c)
BRANCH INTERVAL
d)
BRANCH, FIXTURE
38.
see Horizontal Branch
a)
BRANCH, HORIZONTAL
b)
BRANCH VENT
c)
BRAZED JOINT
d)
B & S
39.
a horizontal vent connecting one or more individual vertical back vents with the vent stack or stack vent.
a)
BRANCH, HORIZONTAL
b)
BRANCH VENT
c)
BRAZED JOINT
d)
B & S
40.
any joint obtained by joining of metal parts with
alloys which melt at temperatures higher than 449 degrees centigrade, but lower than the melting temperature of the parts to be joined.
a)
BRANCH, HORIZONTAL
b)
BRANCH VENT
c)
BRAZED JOINT
d)
B & S
41.
Brown and Sharpe (Specification) or Bell and Spigot (Ends of Pipes)
a)
BRANCH, HORIZONTAL
b)
BRANCH VENT
c)
BRAZED JOINT
d)
B & S
42.
a structure built, erected and framed of component structural parts designed for the housing. shelter, enclosure or support of persons, animals or propety of any kind.
a)
BUILDING
b)
BUILDING DRAIN
c)
BUILDING SEWER
d)
BUILDING SUBDRAIN
43.
that part of the lowest horizontal piping of a drainage system which receives the discharge from soil, waste and other drainage pipes inside the walls of the building and conveys it to the building sewer beginning 0.6 meter outside the building wall.
a)
BUILDING
b)
BUILDING DRAIN
c)
BUILDING SEWER
d)
BUILDING SUBDRAIN
44.
that pat1 of the horizontal piping of a drainage
system which starts from the end of the building drain, and which receives the discharge of the building drain and conveys it to a public sewer, private sewer, individual sewage disposal system or other point of disposal.
a)
BUILDING
b)
BUILDING DRAIN
c)
BUILDING SEWER
d)
BUILDING SUBDRAIN
45.
that portion of an underground system, which cannot drain by gravity into the building sewer.
a)
BUILDING
b)
BUILDING DRAIN
c)
BUILDING SEWER
d)
BUILDING SUBDRAIN
46.
the pipe carrying potable water from the water
meter or other source of water supply to a building or other point of use or distribution on the lot. Building supply shall also mean water service connection.
a)
BUILDING SUPPLY
b)
CAULKING
c)
CAP
d)
CATCH BASIN
47.
plugging an opening with oakum, lead or other materials that are pounded into the annular space. Also, the material pounded into the annular opening .
a)
BUILDING SUPPLY
b)
CAULKING
c)
CAP
d)
CATCH BASIN
48.
a fitting, screwed or caulked over the end of a pipe for closing the pipe end.
a)
BUILDING SUPPLY
b)
CAULKING
c)
CAP
d)
CATCH BASIN
49.
a receptacle in which liquids are retained for a
sufficient period of time to allow settleable material to deposit.
a)
BUILDING SUPPLY
b)
CAULKING
c)
CAP
d)
CATCH BASIN
50.
a person who has shown competence to test and maintain backflow assemblies to the satisfaction of the Administrative Authority having jurisdiction.
a)
CERTIFIED BACKFLOW ASSEMBLY TESTER
b)
CESSPOOL
c)
CHASE
d)
CHECK VALVE
51.
a non-watertight lined excavation in the ground which receives the discharge of a sanitary drainage system or part thereof, designed to retain the organic matter and solids discharging therefrom, but
permitting the li4uid to seep through the bottom and sides of the cesspool.
a)
CERTIFIED BACKFLOW ASSEMBLY TESTER
b)
CESSPOOL
c)
CHASE
d)
CHECK VALVE
52.
a vertical shaft for installation of different pipe stacks.
a)
CERTIFIED BACKFLOW ASSEMBLY TESTER
b)
CESSPOOL
c)
CHASE
d)
CHECK VALVE
53.
a valve that automatically closes to prevent the flow
of liquid or gas in a reverse direction
a)
CERTIFIED BACKFLOW ASSEMBLY TESTER
b)
CESSPOOL
c)
CHASE
d)
CHECK VALVE
54.
a group vent pipe which starts in front of the extreme fixture connection on a h01izontal branch and connects to the vent stack.
Sec loop' vent, also.
a)
CIRCUIT VENT
b)
CLARIFIER
c)
CODE
d)
COMMON VENT
55.
Sec Interceptor.
a)
CIRCUIT VENT
b)
CLARIFIER
c)
CODE
d)
COMMON VENT
56.
-The word ''Code" or "this Code," when U5ed alone, shall mean these regulations, subsequent amendments thereto or any emergency rule
or regulation which the Administrative Authority having jurisdiction may lawfully adopt.
a)
CIRCUIT VENT
b)
CLARIFIER
c)
CODE
d)
COMMON VENT
57.
sec unit vent and dual vent.
a)
CIRCUIT VENT
b)
CLARIFIER
c)
CODE
d)
COMMON VENT
58.
a specially designed system of waste piping embodying the horizontal wet venting of
one or more sinks or floor drains by means of a common horizontal waste and vent pipe. adequately sized to provide free movement of air above the flow line of the drain.
a)
COMBINATION WASTE AND VENT SYSTEM
b)
COMBUSTIBLE CONSTRUCTION
c)
COMMISSION
d)
COMMON
59.
a structure which any part of its structural framework will ignite and burn at a temperature of 756 degrees centigrade or less.
a)
COMBINATION WASTE AND VENT SYSTEM
b)
COMBUSTIBLE CONSTRUCTION
c)
COMMISSION
d)
COMMON
60.
The Professional Regulation Commission (PRC).
a)
COMBINATION WASTE AND VENT SYSTEM
b)
COMBUSTIBLE CONSTRUCTION
c)
COMMISSION
d)
COMMON
61.
that part of a plumbing system designed and installed to serve more than one (1) appliance, fixture, building or system.
a)
COMBINATION WASTE AND VENT SYSTEM
b)
COMBUSTIBLE CONSTRUCTION
c)
COMMISSION
d)
COMMON
62.
is a room or space having a volume less than I 4 cu.m with 250-kilogram calorie of the aggregate input rating of all fuel-burning appliances installed in that space.
a)
CONFINED SPACE
b)
CONTAMINATION
c)
CONTINUOUS VENT
d)
CONTINUOUS WASTE
63.
an impairment of the quality of the potable water
which creates an actual hazard to the public health through poisoning or spread of disease by sewage, industrial fluids or waste. Also, defined as High Hazard.
a)
CONFINED SPACE
b)
CONTAMINATION
c)
CONTINUOUS VENT
d)
CONTINUOUS WASTE
64.
a continuous vent is vertical vent that is a
continuation of the drain to which the vent connects.
a)
CONFINED SPACE
b)
CONTAMINATION
c)
CONTINUOUS VENT
d)
CONTINUOUS WASTE
65.
a drain connecting the compartments of a set of fixtures to a trap or connecting other permitted fixtures to a common trap.
a)
CONFINED SPACE
b)
CONTAMINATION
c)
CONTINUOUS VENT
d)
CONTINUOUS WASTE
66.
a vertical pipe to convey rainwater
a)
CONDUCTOR OR DOWNSPOUT
b)
CORPORATION COCK
c)
CRITICAL LEVEL
d)
CROSS-CONNECTION
67.
a stop valve placed at the connection of the
water service pipe to the water main.
a)
CONDUCTOR OR DOWNSPOUT
b)
CORPORATION COCK
c)
CRITICAL LEVEL
d)
CROSS-CONNECTION
68.
C-L or C/L marking on a backflow prevention
device or vacuum breaker is a point conforming to approved standards and established by the testing laboratory....
a)
CONDUCTOR OR DOWNSPOUT
b)
CORPORATION COCK
c)
CRITICAL LEVEL
d)
CROSS-CONNECTION
69.
any connection or arrangement, physical or otherwise, between a potable water supply system and any plumbing fixture or any tank. receptable, equipment or device, through which enables non-potable, used, unclean, polluted, contaminated water or other substances to enter into any part of such potable water system under any condition.
a)
CONDUCTOR OR DOWNSPOUT
b)
CORPORATION COCK
c)
CRITICAL LEVEL
d)
CROSS-CONNECTION
70.
an open, unoccupied space, bounded on two (2) or more sides by the walls of the building. An inner ___ is a ___ entirely within the exterior walls of a building.
a)
COURT
b)
DEAD-END
c)
DEPARTMENT HAVING JURISDICTION
d)
DEVELOPED LENGTH
71.
the extended portion of a pipe that is closed at one end to which no connections are made on the extended portion, thus permitting the stagnation of liquid or air therein.
a)
COURT
b)
DEAD-END
c)
DEPARTMENT HAVING J URISDICTION
d)
DEVELOPED LENGTH
72.
the Administrative Authority and includes any other law enforcement agency concerned by any provision of this Code, whether St1ch agency is specifically named or not.
a)
COURT
b)
DEAD-END
c)
DEPARTMENT HAVING JURISDICTION
d)
DEVELOPED LENGTH
73.
the length of a pipe along its centerline and
fittings.
a)
COURT
b)
DEAD-END
c)
DEPARTMENT HAVING JURISDICTION
d)
DEVELOPED LENGTH
74.
unless specifically stated, the term "diameter'' is the nominal ___ as designated commercially. I. D. denotes inside diameter of pipe and O.D. denotes outside diameter of tube.
a)
DIAMETER
b)
DOMESTIC SEWAGE
c)
DOUBLE-BEND FITTING
d)
DOUBLE OFFSET
75.
the liquid and water-home wastes derived from
the ordinary living processes, free from industrial wastes and of such character that permit satisfactory disposal without special treatment.
a)
DIAMETER
b)
DOMESTIC SEWAGE
c)
DOUBLE-BEND FITTING
d)
DOUBLE OFFSET
76.
It is discharged into the public sewer or into a private sewage disposal system
a)
DIAMETER
b)
DOMESTIC SEWAGE
c)
DOUBLE-BEND FITTING
d)
DOUBLE OFFSET
77.
a pipe fitting with adjacent reverse bends and shaped like the letter "S''
a)
DIAMETER
b)
DOMESTIC SEWAGE
c)
DOUBLE-BEND FITTING
d)
DOUBLE OFFSET
78.
two offsets in succession or in series such that the
centerlines of the outside ends are in the same straight line .
a)
DIAMETER
b)
DOMESTIC SEWAGE
c)
DOUBLE-BEND FITTING
d)
DOUBLE OFFSET
79.
the vertical portion of a rainwater conductor
a)
DOWNSPOUT
b)
DRAIN
c)
DRAINAGE SYSTEM
d)
DRY VENT
80.
a pipe, which carries ground and surface waters, storm water or wastewater into a building drainage system
a)
DOWNSPOUT
b)
DRAIN
c)
DRAINAGE SYSTEM
d)
DRY VENT
81.
includes all the pipings within public or private
premises which convey sewage or other liquid wastes to a legal point of disposal but does not include the mains of a public sewer system or a public sewage treatment or disposal plant.
a)
DOWNSPOUT
b)
DRAIN
c)
DRAINAGE SYSTEM
d)
DRY VENT
82.
a vent that does not carry liquid or water-borne wastes.
a)
DOWNSPOUT
b)
DRAIN
c)
DRAINAGE SYSTEM
d)
DRY VENT
83.
a term used to describe soil or waste system where
all pipings are of threaded pipe, tubing or other such rigid construction using recessed drainage fittings to correspond to the types of piping.
a)
DURHAM SYSTEM
b)
EFFECTIVE OPENING
c)
EXISTING WORK
d)
FAMILY
84.
is the minimum cross-sectional area at the point
of water supply discharge measured or expressed in terms of:
1. diameter of a circle;
2. if the opening is not circular, the diameter of a circle of equivalent cross-sectional area.
a)
DURHAM SYSTEM
b)
EFFECTIVE OPENING
c)
EXISTING WORK
d)
FAMILY
85.
the on-going installation of the plumbing system or
any part thereof which has been installed prior to the effectivity of this Code.
a)
DURHAM SYSTEM
b)
EFFECTIVE OPENING
c)
EXISTING WORK
d)
FAMILY
86.
one person living alone or a group Jiving together, whether related to each other by birth or not.
a)
DURHAM SYSTEM
b)
EFFECTIVE OPENING
c)
EXISTING WORK
d)
FAMILY
100 %
