Font size
WorksheetsTLE Review Quiz
Total questions: 100
Worksheet time: 50mins
What component or material connects the tailpiece of the bathroom sink to the P-trap?
Coupling
Flange
Elbow
Sanitary tee
What material should be installed to connect two pipes and make a ninety degrees pipe line angle?
Flange
Elbow
P-trap
Coupling nut
What appropriate material you will install in the sink sanitary drain with vent?
Faucet
San tee
Coupling
Elbow
What do you call to the passage way out of waste from the vanity sink?
Drain pipe line
Hot line
Cold line
Vent line
What should you use to connect a two plastic pipe to make a straight or 180 degrees pipe line angle?
Sanitary tee
Coupling
Funnel
Elbow
What is the minimum standard width of a vanity?
10 inches
20 inches
30 inches
40 inches
This is the process of joining metals that produces coalescence of materials by heating them with or without the application of pressure.
Welding
Machining
Manufacturing
Pressuring
What energy contains an intense heat that continually flows outward from deep within the earth?
Biomass
Solar energy
Nuclear energy
Geothermal energy
What part of the vehicle provides the motive power for all the various functions which the vehicle or any part or it, may be required to perform?
Engine
Basic structure
Super structures
Auxiliaries
The following are principles of Competency-Based Training EXCEPT:
Simultaneous graduation
Self-paced
Allows multiple entry
Instruction is modular in form
It is a promulgated document that serves as a guiding policy for Philippine TVET offerings and establishment of assessment and certification requirements for the middle level manpower in order to earn a qualification.
Competency development
Training standards
Training regulation
Competency-based curriculum
What part of CBC specifies the context of the training which includes list of tools and equipment, access to learning resources and equipment manuals, and types of facility?
Descriptor
Outline
Content
Condition
Philippine TVET Qualification Framework (PTQF) defines program under UTPRAS except;
Program registration
National Assessment
Program design
Program implementation
Which are long-pointed jaw pliers that have multiple usage such as gripping, bending, cutting small-gauge wire and can go through slight openings?
Combination pliers
Diagonal pliers
Ending cutting pliers
Needle nose pliers
Which is a special type of screwdriver that is intended to drive and remove torx screw?
Offset screw driver
Flat screwdriver
Torx screwdriver
Phillips screwdriver
Which is not a cutting tool used in automotive shop?
Hacksaw
Taps and dies
Wrench
Drills
Which is not a gear and bearing puller?
Flaring tools
Bar yoke puller
Three-jaw puller
Bridge-yoke puller
Which is used to accurately mesh the number of threads per inch before using tap and dies?
Steel rule
Pitch gauge
Retractable measuring tool
Try square
Which pliers are used to aid in fixing or removing locking, snap or retaining rings?
Lock ring pliers
Diagonal pliers
Ending cutting pliers
Needle nose pliers
Which screwdriver has a blade at a right angle for an unconventional position of a screw? It is used when an ordinary screwdriver cannot fit in doing tasks.
Impact screwdriver
Flat screwdriver
Torx screwdriver
Offset screwdriver
Which has a dual function from wire brush wheel and stone wheel?
Angle driver
Torx screwdriver
Bench grinder
Phillips screwdriver
Which pneumatic tool is used in loosening and tightening screws, bolts and nuts with higher torque?
Air drill
Air blow gun
Die grinder
Air impact wrench
Which are not examples of a hydraulic tool?
Hydraulic jacks
Drill press
Automotive lifts
Shop cranes
Which kind of lift is used to remove the car engine from the vehicle’s hood?
In-ground lift
Surface lift
Engine lift
Tire lift
Which is a maintenance activity that will improve the condition of the engine and gives it better performance? It will also give an extension to the engine’s life.
Electric power motor
Pneumatic power fluids
Water in whipper
Changing the engine oil
How does a diode convert an AC signal to a DC signal?
By filtering the flow of current in the circuit
By allowing current to pass in one direction
By resisting the flow of current in the circuit
By regulating the flow of current in the circuit
These external factors and/or pre-requisites for completing the action described in a performance objective.
Criteria
Conditions
Procedures
Performance criteria checklists
Also known as Profit and Loss statement. It reports the company’s financial performance in terms of net profit or loss over a specified period.
Fixed assets
Income statement
Statement of cash flow
Statement of retained earnings
Things of value that you have and that may have future economic benefit.
Assets
Profit
Income
Expense
These are the things that have negative value because they are something you owe.
Liabilities
Debts
Expenses
Investment
The type of assets that are acquired by the business for use in the business. The business has no intention of selling them at the time of purchase for as long as they remain productive and business continues to operate. Also known as long term assets.
Fixed
Current
Financial term
Short term
It is other wise known as the “anti-hemorrhagic vitamin”.
Vit b1
Vit d
Vit a
Vit k
This vitamin is produced by our skin upon exposure to sunlight.
Vit b1
Vit d
Vit a
Vit k
The top view is directly over the
Rear view
Front view
Side view
Bottom view
They introduced and developed the vowel letters and cuneiform writing.
Egyptians
Greeks
Romans
Phoenician
They introduced the form of the letters from where the existing letters in our alphabet were derived.
Egyptians
Greeks
Romans
Phoenician
It is one of the most important tools in draftsman.
T-square
Pencil
Triangle
Drawing board
When the flow of current is always in the same direction, the system is called.
AC
DC
Voltage
Power
Valence bond refers to the energy level of
Atoms
Electrons
Nucleus
Protons
It is used to support the triangle for drawing horizontal line.
T-square
Pencil
Triangle
Drawing board
It is used for dividing lines or distances into any number of equal parts and transferring measurement.
Divider
French curve
Triangular scale
Compass
It is a method of representing the exact shape of an object into two or more views on planes generally at right angles to each other by extending perpendicular from the object to the plane.
Pictoral drawing
Orthographic drawing
Perspective drawing
Isometric drawing
All letters having strokes :accented” or made up of thick and thin elements are classified as__.
Italic
Roman
Text (black letter)
Gothic
This includes all styles of old english text, church text, block text, german text.
Italic
Roman
Text (black letter)
Gothic
This is the perpendicular distance between 2 profile planes.
Width
Height
Depth
Frontal plane
Which of the following is the last procedure in manicuring and pedicuring?
Apply cuticle softener or soak fingertips in soapy water to soften cuticle
Push back the cuticle trim hangnails with a pair of scissors
Dry nails and wipe them with a remover. Apply colorless polish evenly then your selected colored polish. Let the polish dry between coats then apply another coat
Apply a colorless sealing coat over the nail and under the tips.
If a lot unknown and uncontrollable factors affect the success or failure of a firm then an entrepreneur should be competent in:
Making decisions
Shift to another business
Seeking opportunity abroad
Planning alone’
We all desire success in business ventures but it is most important for an entrepreneur to be:
Good communicator
A good follower of trends
Creative
Highly educated
A straight line is the ___ distance between two points.
Shortest
Longest
Half
Infinite
A line is a geometric primitive that has no ____.
Length
Point
Direction
Thickness
When a line is parallel to a plane, the projection of the line on to that plane will be its ___ length.
Shortened
True
Enlarged
Point
In case when a line is perpendicular to HP & parallel to VP then what figure will be projected on HP?
Point
Line
Square
Inclined line
In which of the following projection depth is not shown?
Oblique projection
Isometric projection
Perspective projection
Orthographic projection
When the projectors are parallel to each other and also perpendicular to the plane, the projection is called ____ projection.
Oblique projection
Orthographic projection
Isometric projection
Perspective projection
Ensures that the interpretations, meanings, and others are correct is a product of what skills?
Time-management skills
Writing skills
Computer skills
Critical-thinking skills
Listening skills
Other basic knowledge of a medical transcriptionist is the following EXCEPT.
(a)
Other basic knowledge of a medical transcriptionist is the following EXCEPT.
Ability to follow verbal and written instructions.
Ability to sort, checks, count, and verify number with accuracy.
Demonstrated MT proficiency in multiple report types and multiple “specialties”
Knowledge of basic to advance mechanical terminologies.
Above-average memory skills
It is a useful device for hands-free transcription. It helps the transcriptionist to manipulate easily the audio through the use of foot to stop and play the file without using the hands, as the hand focuses on typing, thus increasing productivity.
Foot pedal
Dictation software
Headset
Medical dictionaries
This software can be great for medical transcription professionals who need a dictation application without tying up a dedicated telephone line or having to carry around a portable device. It allows the transcriptionist to access dictated reports and materials that sometimes in a different format than usual audio format.
Foot pedal
Medical dictionaries
Dictation software
Headset
What should a transcriptionist do if he is not sure of what the doctor just said?
Flaglisting
Check listing
What should be the ideal height of the bathroom sink from the floor?
Approximately 12-21 inches from the floor
Approximately 23-27 inches from the floor
Approximately 39-49 inches from the floor
Approximately 29-36 inches from the floor
The preparation of good quality lumber includes several stages. When it is dried, the process involved is?
Seasoning
Staining
Lumbering
Logging
Find the total number of board feet of six pieces of lumber with a dimension of 2” x 4” x 12’.
8 bd. Ft.
96 bd. Ft.
48 bd. Ft.
480 bd. Ft.
You are almost finished with your project. One of the procedure below is done before the application of finishing materials.
Cutting
Spraying
Sanding
Varnishing
A surfaced lumber where two of its sides are smooth or planned is called:
S3s
S2s
Rough
S4s
How does a baste cook be done?
By cooking over coals on a stick
By pounding tough meat to make it thinner and tender
By moistening food with liquid, usually with melted butter or meat drippings
By stuffing chicken before cooking
The viand which is rich in protein, vitamins, minerals, and other macronutrients and can be prepared “at a limited budget” is
Pinakbet with broiled bangus
Sauteed monggo with shrimp paste
Vegetable guisado with buillon cubes
Lumpiang sariwa with tofu
In the hierarchy of learning, which of the following is the simplest?
Attitudes
Cognitive strategies
Intellectual skills
Verbal information
It is a type of human resource for presenting instruction.
Customer
Instructor
Patrons
All of the above
Which of the following example of a print material as resource used for practice and feedback?
Mock-ups
Cassette tape
Job sheet
Realia
In giving instructions to the trainees, TRAINERS are required to SPEAK ENGLISH ONLY as medium of instruction.
True
Partly true
False
Partly false
This page has the learning outcome number and title and a table of all activities for presentation, practice and feedback the trainee can undergo to attain the required competency and this term refers to:
Learning experiences
Learning outcome summary
Module content
Module title
This is a page that contains the content assessment criteria and assessment method
List of competencies
Learning outcome summary
Module content
Module title
This page contains the Qualification Title on top of the page and a competency number unit of competencies, module title and the code in each column.
Front cover
List of competencies
Learning outcome summary
Module content
The plane upon which the top view is projected is known as __.
Horizontal
Frontal
Profile
Base
Which angle of projection does the figure resembles if it is lying in 3rd coordinate?
Second - angle projection
Third - angle projection
Fourth - angle projection
First - angle projection
The ___ is the plane upon which the side view is projected.
Horizontal plane
Profile plane
Vertical plane
Inclined plane
An advantage of this type of view is that each view shows the object all the way through as if it were transparent?
Planar
Horizontal
Auxiliary
Orthographic
Any object can be viewed from ___ mutually perpendicular views.
Two
Four
Three
Six
It is a belief that forms one of the bases for the research.
Significance of the study
Scope of research
Statement of the problem
Research assumptions
What is the correct cyclical process of action research for learning and improvements?
Plan-study-do-act
Plan-do-study-act
Plan-act-study-do
Plan-study-act-do
What does IMRAD research mean?
Introduction, methodology, results, and discussion
Introduction, methodology, results, and data analysis
Introduction, methodology, revision, and discussion
Introduction, methodology, revision, and data presentation
This involves manipulating one or more variables in order to observe the effect on the outcome, often used in the natural sciences.
Experimental research
Action research
Ethnographic research
Grounded theory
These type of learners like to think the problems through step-by-step and tend to be perfectionists who like to fit things into a rational scheme.
Activists
Reflectors
Pragmatists
Theorists
The peak-to-peak voltage in 117 V Alternating Current (AC) outlet is __.
620 V
165.5 V
331 V
220 V
The statement on the coverage of the course, its relevance in the industry sector, and the possible occupations the trainee will have after completion is written in the ___.
Assessment criteria
Course descriptor
Learning outcome
Performance criteria
It refers to the utilization of technology in teaching and learning, which includes both the non-digital and digital media.
Digital literacy
Digital learning
Online digital tools and apps
Educational technology
This section contains information and requirements in designing training programs for the qualification.
Section 1. Definition of Qualification
Section 2. Competency Standards
Section 3. Training standards
Section 4. National Assessment and Certification Arrangement
Which of the following does not belong to the ACQUISITION PERFORMANCE in Gagne’s Nine event of instruction?
Retrieval and responding
Selective perception
Retrieval
Reinforcement
What is the most widely used semiconductor material?
Silicon
Germanium
Copper
Selenium
It is a tool used for measuring or setting of distances, and to layouts arcs.
Divider
Hacksaw
Pliers
Try square
Who introduced the concept of providing ALU in the computer system?
Joseph Marie Jacquard
Charles Babbage
John Von Newman
Herman Hollerith
Which is the raw material to be processed by the computer?
Information
Data
Graphics
Objects
For Crash Dumps to be obtained, a page file must exist on the __.
Boot partition
NTFS partition
System partition
Data partition
Which one is an internet address?
ADSL
ISDN
URL
ISP
When the diameter of cylindrical object is to be measured, the tool to be used is called __.
Ruler
Caliper
Pull-push
Meter stick
Metaldehyde is a highly selective molluscicide which will minimize problem in bangus ponds:
Snails
Frogs
Catfish
Snake
To search for related literature by accessing several database by the use of a telephone line to connect a computer library with computers that have database is termed.
Computer search
Manual search
On-line search
Compact disc search
Fertilizers are applied to fish ponds in order to __.
Change the color of water
Neutralize acidity
Promote fast growth of stocked fish
Enhance the production of natural foods
Which is done to increase the circulation of the blood to the scalp, rest and soothe the nerves, stimulate the muscles and the activity of the scalp?
Shampooing
Hair treatment
Scalp manipulation
Rebonding
