NEW
Font size
WorksheetsNail Care and Basic Techniques Quiz
Total questions: 54
Worksheet time: 27mins
Which of the following is the correct procedure before performing any nail care service?
Sanitize hands and tools properly
Ask the client’s preferred nail shape
Prepare the materials neatly on the table
Wash the client’s hands with soap and water
Which tool is BEST for trimming excess cuticle growth?
Nail nipper
Emery board
Cuticle pusher
Orangewood stick with cotton
A client shows greenish nail discoloration. What is the MOST professional action?
Recommend medical treatment first
Perform a dry manicure with extra care
Use nail hardener to protect the nail plate
Apply nail polish to hide discoloration
Which nail shape provides strength and is least prone to breaking?
Oval
Round
Stiletto
Square
The main purpose of a base coat is to:
Provide glossy shine
Make polish dry faster
Act as an adhesive layer for polish
Prevent nail discoloration and stains
Which skin type is prone to enlarged pores and frequent breakouts?
Dry
Oily
Normal
Combination
Which is the FIRST step in giving a basic facial treatment?
Steaming the face to open pores
Exfoliating to remove dead skin cells
Applying moisturizer to hydrate the skin
Cleansing the skin to remove dirt and makeup
Which makeup technique can make close-set eyes appear wider apart?
Apply lighter shadow at the outer corner
Apply darker shadow at the inner corner
Use heavy mascara on lower lashes only
Extend eyeliner slightly beyond the outer edge
Which hair removal method provides the longest-lasting result?
Shaving with a razor
Tweezing with forceps
Waxing with hot or cold wax
Depilatory cream application
Which of the following is the MOST important sanitation practice when performing a facial service?
Using disposable cotton pads for toner
Steaming the client’s face to kill bacteria
Washing hands before and after the procedure
Applying alcohol-based toner to cleanse the skin
Which type of fertilizer releases nutrients slowly over a long period?
Foliar fertilizer
Organic fertilizer
Inorganic fertilizer
Complete fertilizer
In horticulture, mulching is primarily done to:
Prevent root rot and pest attacks
Provide nutrients directly to the roots
Improve photosynthesis of the plant
Retain soil moisture and control weeds
Which is the MOST critical factor that influences seed germination?
Type of soil
Presence of pests
Availability of light
Moisture and temperature
A horticulturist wants to improve the soil’s structure and increase its ability to hold nutrients. What should be added?
Clay
Compost
Gravel
Sand
Which method of irrigation is MOST efficient in conserving water while directly supplying moisture to plant roots?
Drip irrigation
Flood irrigation
Sprinkler irrigation
Surface irrigation
What is the main advantage of using raised beds in horticultural production?
It eliminates the need for regular watering
It allows plants to grow without fertilizers
It prevents weeds from growing completely
It improves drainage and root development
Which instrument is MOST appropriate for drawing precise circles of various sizes?
Compass
Divider
French curve
Protractor
In technical drawing, which line is used to show hidden edges or parts?
Center line
Chain line
Continuous thick line
Dashed line
The main purpose of an isometric drawing is to:
Show all details in full scale
Display hidden lines and internal parts
Represent three-dimensional objects on a two-dimensional plane
Provide a detailed exploded view of components
Which type of scale is MOST suitable for architectural drawings of buildings?
Architect’s scale
Engineer’s scale
Full-scale (1:1)
Metric scale
Which drawing tool is used to draw straight lines without a ruler?
Compass
Divider
Set square
T-square
When making a working drawing, what is the MOST important consideration?
Use bright colors for clarity
Maintain accuracy and proper proportions
Write all notes in cursive handwriting
Add decorative elements to enhance presentation
In orthographic projection, the top view of an object is called the:
Elevation
Plan
Profile
Section
Which line type is used to indicate the center of circles and symmetrical objects?
Center line
Chain line
Continuous thick line
Dashed line
The main purpose of dimensioning in drafting is to:
Replace the need for scale
Make drawings more decorative
Show the appearance of an object
Indicate size, location, and shape of features accurately
Which type of drawing represents an object in true shape but with all dimensions shown in one plane?
Exploded view
Isometric drawing
Perspective drawing
Orthographic projection
Which type of welding is BEST suited for joining thick steel plates?
Oxy-acetylene welding
Resistance spot welding
Shielded Metal Arc Welding (SMAW)
Gas Metal Arc Welding (GMAW/MIG)
What is the main purpose of a welding helmet?
To ventilate harmful gases
To hold the welding electrodes
To improve visibility of the welding line
To protect the eyes and face from sparks, heat, and UV radiation
Which electrode is MOST suitable for welding mild steel in all positions?
E6010
E7018
E7024
E6011
Preheating metal before welding is necessary to:
Reduce cooling time
Eliminate slag formation
Increase the welding speed
Prevent cracking and distortion
In gas welding, the flame used for welding mild steel should be:
Neutral flame
Oxidizing flame
Reducing flame
Carburizing flame
Which type of joint is MOST commonly used for welding two metal plates edge-to-edge?
Butt joint
Corner joint
Lap joint
Tee joint
Which of the following is a primary hazard in welding?
Slippery floors
Noise from grinders
Hand fatigue from holding tools
UV and infrared radiation exposure
Which gas is commonly used as a shielding gas in MIG welding for mild steel?
Oxygen
Nitrogen
Hydrogen
Carbon dioxide
What is the main function of slag in arc welding?
To add strength to the weld
To cool the electrode faster
To increase the speed of welding
To protect the molten weld metal from oxidation
Which procedure ensures proper joint penetration and weld quality?
Increasing welding current to maximum
Using multiple electrodes simultaneously
Wiping the joint surface with water before welding
Adjusting electrode angle, current, and travel speed correctly
Which tool is MOST appropriate for checking voltage in an electrical circuit?
Ammeter
Voltmeter
Ohmmeter
Multimeter
What is the main purpose of a circuit breaker in a home electrical system?
To convert AC to DC
To reduce electricity bills
To increase the efficiency of electrical appliances
To automatically cut off power during overload or short circuit
In wiring a single-phase residential circuit, what color is commonly used for the neutral wire?
Black
Green
Red
White or gray
Which electrical device converts high voltage to low voltage for household use?
Rectifier
Generator
Capacitor
Transformer
When installing a light fixture, the live (hot) wire should be connected to:
The switch terminal
The neutral terminal
The ground terminal
The metal frame of the fixture
Which of the following is MOST important when maintaining electrical panels?
Painting the panel for aesthetics
Using maximum current for testing
Ensuring all connections are tight and free from corrosion
Covering with plastic sheets to prevent dust
Which type of wire is MOST suitable for outdoor electrical installations exposed to sunlight and moisture?
Bare copper wire
Romex (NM) cable
THHN insulated wire
Flexible extension wire
A multimeter set to measure resistance reads infinite (∞) resistance when testing a component. This MOST LIKELY indicates:
The component is functioning normally
An open circuit or broken connection
A short circuit exists in the component
The component has low resistance
What is the main purpose of grounding in an electrical system?
To provide a low-resistance path for excess current during a fault
To improve energy efficiency by reducing current loss
To protect electrical devices from normal current flow
To stabilize voltage levels in the circuit under normal operation
Which procedure MOST effectively prevents electrical shock during maintenance?
Touching the grounding wire first to discharge static electricity
Using a higher-rated fuse to prevent overload during testing
Ensuring the circuit is de-energized and using insulated tools
Wearing rubber gloves and insulating shoes while working on live circuits
Which factor MOST determines the durability of a woven handicraft?
Type of weaving pattern used
Quality of raw materials selected
Skill of the artisan in construction
Proper finishing and treatment applied
In evaluating handicrafts, which criterion is MOST essential for commercial success?
Creativity of design
Neatness of construction
Functionality of the product
Uniqueness compared to competitors
All of the following are important in preserving wooden handicrafts, but which practice is MOST effective in preventing termite damage?
Regular dusting and cleaning
Applying varnish or paint coating
Treating wood with preservative chemicals
Storing in a dry and well-ventilated area
Which is the BEST reason why indigenous materials are recommended in handicraft production?
They strengthen cultural identity
They are more affordable for artisans
They promote environmental sustainability
They are widely available in local communities
When marketing handicrafts, which factor MOST influences repeat customer purchase?
Low selling price
Attractive packaging
Variety of designs offered
Consistent quality of the product
Which process is MOST crucial in ensuring that paper-based handicrafts last longer?
Avoiding frequent handling
Coating with varnish or sealant
Storing away from direct sunlight
Using thick and high-quality paper
Among the following, which is the MOST critical factor to consider in selecting beads for jewelry-making?
Size consistency
Color combination
Durability of the material
Affordability of the beads
Which aspect contributes MOST to the international marketability of handicrafts?
Durability and functionality
Originality of cultural design
Competitive pricing strategy
Use of traditional production methods
