WorksheetsWorking at Height Safety Quiz
Total questions: 30
Worksheet time: 15mins
What legislation primarily governs working at height in the UK?
Work at Height Regulations 2005
Manual Handling Operations Regulations 1992
Personal Protective Equipment at Work Regulations 1992
Electricity at Work Regulations 1989
Who is responsible for ensuring safety when working at height?
The employer
The employee only
The local council
The equipment supplier
What is the main cause of accidents when working at height?
Poor lighting
Falls from height
Equipment theft
Overcrowding
Before starting work at height, what is essential to carry out?
Risk assessment
Toolbox talk after work
Equipment delivery
Employee interviews
What must be done if equipment used for working at height is found damaged?
Continue using it carefully
Report and take it out of service immediately
Try to repair it yourself
Use it only for low-risk tasks
What personal protective equipment (PPE) is commonly required for working at height?
Safety boots only
Harness and lanyard
Ear defenders
Gloves only
What is the safest method to work at height?
Using a ladder only
Using collective protection such as scaffolding or guardrails
Standing on boxes
Holding onto a colleague
When using a ladder, what should be the maximum working height?
2 meters
5 meters
10 meters
There is no maximum height
How should ladders be positioned for safe use?
At a 90-degree angle
At a 75-degree angle (1:4 ratio)
Flat on the ground
Leaning on the side
What should you do if weather conditions make working at height unsafe?
Carry on but carefully
Stop and postpone work
Only work if you’re experienced
Wear extra PPE
Which of the following is NOT considered a form of fall protection?
Safety harness
Guardrails
Safety net
Safety boots
How often should equipment used for working at height be inspected?
Once every five years
Before use and at regular intervals as recommended
Only after an accident
Never
Who can carry out a risk assessment for working at height?
Any trained and competent person
Only the site manager
Only the Health and Safety Executive
The workers themselves
What must be considered in a risk assessment for working at height?
Height and distance of fall
Weather conditions
Equipment condition
All of the above
What is the purpose of guardrails?
To decorate the workplace
To prevent people from falling
To store tools
To guide traffic
When working on scaffolding, what must workers wear?
Safety harness attached to an anchor point
Loose clothing
A helmet only
No special equipment
What should be done before climbing a scaffold?
Inspect it for defects and ensure it is safe and properly erected
Ask a colleague to hold it
Climb quickly to avoid accidents
Use a ladder instead
What is a safe working load?
The maximum weight a piece of equipment can carry safely
The weight of the worker only
The weight of the equipment
The total number of workers on site
Why should tools be secured when working at height?
To prevent them falling and injuring someone below
To make the job look more professional
To prevent theft
To make tools last longer
What should you do if you feel unwell while working at height?
Continue working until the task is done
Immediately stop and report to your supervisor
Ignore it
Work faster to finish
What is the role of the Health and Safety Executive (HSE) in working at height?
To provide training only
To enforce regulations and investigate accidents
To supply PPE
To manage construction projects
Which of the following is a collective protection measure?
Personal fall arrest system
Safety net
Helmet
Safety gloves
What is the minimum height at which working at height regulations apply?
0.5 meters
1.0 meter
2.0 meters
Any height where a fall could cause injury
What should be done if a fall arrest system has been used in a fall?
It can be reused immediately
It must be taken out of service and inspected by a competent person
It should be thrown away
It can be used only after a quick visual check
What is a ‘safety harness’?
A device worn to prevent falls or reduce the impact of falls
A type of helmet
A pair of gloves
A communication device
When working at height, how should tools be transported?
In your hand while climbing
In a secured tool belt or hoisted by rope
Throw them up to the work area
Leave them on the ground
What is the 1:4 rule for ladder placement?
For every 4 meters up, the base should be 1 meter from the wall
The ladder should be 4 meters tall and 1 meter wide
The ladder should be used for only 4 hours at a time
Use the ladder for 1 hour every 4 hours
Which of the following is a risk when working at height?
Slipping or tripping
Being struck by falling objects
Equipment failure
All of the above
When using a mobile elevating work platform (MEWP), what is important?
Only trained operators should use it
No safety checks are needed
Anyone can use it as long as they wear gloves
It can be used without a harness
What is the best way to avoid working at height?
Use alternative methods like working from the ground or using extendable tools
Use longer ladders
Work faster
Work at night
