wayground logo

Free Printable Worksheets

NEW

Font size

S
M
L
XL
Worksheets

ARCHITECTURAL BUILDING MATERILAS

Total questions: 25

Worksheet time: 19mins

Name
Class
Date
1.

Which material is most commonly used as a base for ceramic wall tiles in shower areas?​

a)

Regular gypsum board

b)

Water-resistant gypsum board

c)

Plywood sheathing

d)

Fiber-cement board

2.

Which finish is typically used to protect and highlight the natural grain of wood flooring?​

a)

Cement paint

b)

Polyurethane varnish

c)

Limewash

d)

Asphalt emulsion

3.

Which of the following is a noncombustible interior ceiling system that can improve acoustics and conceal services?​

a)

Exposed wood joists

b)

Suspended acoustical ceiling

c)

Plaster on wood lath

d)

Plywood ceiling panels

4.

Which type of paint is formulated to reduce the flame spread of combustible materials?​

a)

Latex paint

b)

Oil paint

c)

Fire-retardant paint

d)

Heat-resistant paint

5.

Which interior wall finish is a thin, hard, brittle coating often applied in two or three coats over lath or masonry?​

a)

Gypsum board

b)

Plaster

c)

Plywood paneling

d)

Plastic laminate

6.

Which resilient flooring material is generally suitable for use below grade as well as above grade?​

a)

Linoleum

b)

Cork tile

c)

Vinyl sheet or tile

d)

Wood strip flooring

7.

What is the primary function of a baseboard in interior finishing?​

a)

Support wall loads

b)

Conceal joint between wall and ceiling

c)

Conceal and finish joint between wall and floor

d)

Provide fire separation

8.

Which tile-setting method uses a thin layer of mortar or adhesive directly over a stable backing?​

a)

Thickset process

b)

Dry-pack process

c)

Thinset process

d)

Floating slab method

9.

Which is a common interior application of plastic laminate?​

a)

Structural wall panels

b)

Countertops and tabletops

c)

Roof decking

d)

Exterior cladding for high-rises

10.

What is the usual purpose of control joints in stucco finishes?​

a)

Improve thermal insulation

b)

Provide drainage channels

c)

Pre-align and control cracking

d)

Increase fire resistance

11.

Which wood flooring type consists of relatively narrow strips less than about 85 mm in face width?​

a)

Plank flooring

b)

Strip flooring

c)

Engineered laminated plank

d)

Wood block flooring

12.

Which terrazzo system uses a thin resinous topping of approximately 6–13 mm over a slab?​

a)

Monolithic terrazzo

b)

Bonded terrazzo

c)

Thinset terrazzo

d)

Sand-cushion terrazzo

13.

Quarry and paver tiles are best described as:​

a)

Glazed nonvitreous tiles for walls only

b)

Natural clay or porcelain tiles, thicker and larger for heavy-duty floors

c)

Thin glass tiles for decorative mosaics

d)

Vinyl tiles with printed patterns

14.

What is the main purpose of divider strips in terrazzo flooring?​

a)

Increase slip resistance

b)

Localize shrinkage cracking and separate colors

c)

Attach terrazzo to the slab

d)

Improve acoustic performance

15.

Which statement about wood flooring installation is MOST appropriate?​

a)

Wood strip flooring can be installed before the building is enclosed.

b)

Wood flooring is unaffected by indoor humidity.

c)

Wood flooring should be installed after enclosure and HVAC operation.

d)

Wood flooring must always be glued to concrete without sleepers.

16.

Which interior wall system provides fire resistance and sound control using a core with additives like glass fibers?​

a)

Regular gypsum board

b)

Type X gypsum board

c)

Veneer plaster on lath

d)

Water-resistant gypsum board

17.

Which statement best describes suspended acoustical ceiling tiles?​

a)

Made only of solid wood for maximum durability

b)

Typically made of mineral or glass fiber with perforated or fissured faces

c)

Always constructed from gypsum board sheets

d)

Primarily structural, designed to support floor loads

18.

Which plaster system is most typical over metal lath for interior partitions?​

a)

One-coat plaster finish

b)

Two-coat plaster on lath

c)

Three-coat plaster (scratch, brown, finish)

d)

Veneer plaster only

19.

Which door leaf construction offers better sound insulation and fire resistance for interior use?​

a)

Hollow-core flush wood door

b)

Solid-core flush wood door

c)

Glass-framed stile-and-rail door only

d)

Batten door

20.

For ceramic tile on floors where accurate slopes and true planes are needed (e.g., showers), which setting method is preferred?​

a)

Thinset directly on joists

b)

Thickset (cement mortar bed)

c)

Adhesive on carpet underlay

d)

Floating wood subfloor only

21.

What do you call the terrazzo system where the terrazzo topping is placed directly on the concrete slab (no thick mortar bed under)?

a)

Epoxy terrazzo

b)

Monolithic terrazzo

c)

Sand‑cushion terrazzo

d)

Bonded terrazzo

22.

In a sand‑cushion terrazzo floor, what is the main purpose of the sand layer under the terrazzo topping?

a)

To make the floor less slippery

b)

To keep the floor warm

c)

To separate the terrazzo from slab movement

d)

To make the terrazzo stick better

23.

When using EIFS (Exterior Insulation and Finish System) in a hot and humid climate like the Philippines, what is the biggest problem if details are poor?

a)

Too much thermal mass

b)

Water leaks around windows and joints

c)

Paint cannot adhere

d)

System cannot be insulated

24.

Which floor finish is best suited for a busy commercial lobby that needs to be very durable and easy to clean?

a)

Cork flooring

b)

Vinyl tile on wood sleepers

c)

Terrazzo on concrete slab

d)

Wood strip flooring on concrete

25.

Which ceiling system is best for an open‑plan office that needs both sound absorption and easy access to pipes and ducts above the ceiling?

a)

Direct plaster on concrete slab

b)

Exposed concrete slab

c)

Suspended acoustical tile ceiling (T‑grid)

d)

Wood plank ceiling