WorksheetsPortable SAW safety test
Total questions: 23
Worksheet time: 12mins
Which of the following is a recommended personal safety practice when operating a power tool?
Use the tool while tired or under the influence of medication
Always use personal protective equipment
Wear loose clothing and jewelry
Ignore the tool’s safety instructions
What is the purpose of the trigger lock on the tool?
To increase the speed
To prevent accidental starting
To lubricate the blade
To change the blade
Why should you secure and support the workpiece to a stable platform?
To prevent loss of control and possible injury
To make the job easier
To increase speed
To reduce noise
What safety equipment is recommended when changing or removing accessories?
Gloves and earplugs
Goggles or glasses with side shields
Dust mask
Steel-toed boots
Why is it important for the user to read and understand the operator's manual before using the saw?
To reduce the risk of injury
To increase the speed of cutting
To make the saw quieter
To avoid cleaning the saw
When running a 'reciprocating saw', why is it important to always hold the shoe flat against the workpiece during cutting?
To increase speed
To avoid excessive vibration
To make the blade last longer
To reduce noise
What should you do before connecting to a power source or battery pack?
Ensure the switch is in the off-position
Ensure the switch is in the on-position
Shake the battery pack
Clean the tool with water
What should you do before changing or removing accessories from the tool?
Leave the battery in place
Adjust the shoe
Turn off the LED
Always remove the battery pack
Which of the following is a recommended safety measure when working in dusty situations?
Use appropriate respiratory protection
Wear sandals
Work in a closed room
Use only one hand
When operating a circular saw, what is the correct procedure after finishing a cut with a saw?
Be sure the lower guard closes and the blade comes to a complete stop before setting the saw down
Set the saw down immediately after cutting
Leave the saw running while setting it down
Ignore the guard position
What should you do to reduce the risk of electric shock when making plunge cuts?
Wear gloves
Check work area for hidden pipes and wires
Use a dull blade
Cut at a slow speed
What is the proper way to hold a circular saw?
Hold the main handle with one hand and place the other hand on the auxiliary handle.
Hold the main handle with both hands.
Hold the auxiliary handle with one hand and the main handle with the other hand.
Hold the circular saw with one hand and use the other hand for support.
Why is it important to keep both hands on the saw while cutting?
To increase the risk of accidents or injuries.
To make the cutting process more difficult.
To show off your skills and impress others.
To maintain control and stability, reducing the risk of accidents or injuries.
Why is it important to use a sharp blade when using a circular saw?
To ensure clean and precise cuts, reduce the risk of kickback, and prevent the blade from getting stuck or overheating.
To increase the risk of kickback and accidents
To make the cuts faster and more efficient
To save money on blade replacements
Why should you never force the saw through the material?
To prevent accidents or damage to the material.
To ensure a smooth and clean cut.
To maintain the integrity of the material.
To avoid injury or harm to yourself.
How often should you inspect the blade for damage?
Once a month
Once a year
Every time before using it
Only when it breaks
What should you do if you notice any damage to the blade?
Continue using it and hope the damage doesn't worsen.
Ignore the damage and keep using the blade.
Try to repair the blade yourself.
Stop using it and replace the blade.
PVC conduit is made out of
Kryptonite
Metal
Wood
Plastic
What should you do if the saw starts to vibrate excessively during use?
Inspect the blade and check for any damage or wear.
Ignore the vibration and keep using the saw.
Continue using the saw despite the excessive vibration.
Tighten the blade to reduce vibration.
If cutting conduit or pipe, the TWO TYPES of saws that would best to use are... (select two)
Reciprocating Saw
Circular Saw
Multipurpose Oscillating Tool
Bandsaw
If 'ripping' long cuts in sheets of plywood, the best type of saw to use would be...
Reciprocating Saw
Circular Saw
Multipurpose Oscillating Tool
Bandsaw
If cutting holes in drywall to install 'old-work boxes', the best type of saw to use would be...
Reciprocating Saw
Circular Saw
Multipurpose Oscillating Tool
Bandsaw
For 'demolition' projects, where removing wood and other building materials, the _______________ saw is used the most.
Multipurpose Oscillating Tool
Circular Saw
Reciprocating Saw
Bandsaw
