WorksheetsHaz Mat Final Part 3
Total questions: 25
Worksheet time: 13mins
Name
Class
Date
1.
Which of the following BEST describes actions included in incident stabilization?
a)
Prevent all contamination
b)
Protect all property at incident
c)
Establish scene perimeters and minimize property damage
d)
Minimize property damage and spread liquids to other areas
2.
NIMS-ICS is required of all state, tribal, and local organizations receiving:
a)
grant money
b)
property taxes
c)
state assistance
d)
Federal preparedness assistance
3.
Which of the following involves considering all factors that will affect an incident and response?
a)
Initial size-up
b)
Strategic goal
c)
Tactical Objective
d)
Hazard and risk assessment
4.
Which incident level requires resources from state/provincial agencies, federal agencies, and/or private industry in addition to unified command?
a)
Level I
b)
Level II
c)
Level III
d)
Level IV
5.
Which of the following are broad statements of what must be done to resolve the incident?
a)
Strategic goals
b)
Tactical objectives
c)
Modes of operation
d)
Incident action plans
6.
Which of the following are a well-thought-out, organized course of events developed to address all phases of incident control within a specified time?
a)
strategic goals
b)
tactical objectives
c)
modes of operation
d)
Incident action plans
7.
Implementation of the incident action plan is accomplished by performing:
a)
ICS duties
b)
Strategic goals
c)
Stactical objectives
d)
two or more modes of operation
8.
Which of the following is the FINAL part of the problem-solving process?
a)
Evaluating progress
b)
Implementing the IAP
c)
Analyzing the situation
d)
Planning the appropriate response
9.
Which of the following statements regarding the ERG is MOST accurate?
a)
It is primarily used by the generic public.
b)
It is primarily designed for use at fixed facilities.
c)
It is a guide to aid emergency responders in quickly identifying hazardous materials.
d)
It addresses all possible circumstances associated with a dangerous goods/hazardous materials incident.
10.
Which portions of the ERG display the four-digit UN/NA identification number of a material followed by the assigned emergency response guide and material’s name?
a)
Blue
b)
Green
c)
Yellow
d)
Orange
11.
Which portions of the ERG provide safety recommendations and general hazards information?
a)
Blue
b)
White
c)
Yellow
d)
Orange
12.
Which section of the Initial Action Guides should be consulted first?
a)
First aid
b)
Public safety
c)
Potential hazards
d)
Emergency response
13.
According to the Table of Initial Isolation and Protection Action Distances, evacuation must always be at least:
a)
50 feet (15 m) upwind
b)
100 feet (30 m) upwind.
c)
50 feet (15 m) in all directions.
d)
100 feet (30 m) in all directions.
14.
Contact information for emergency response centers is included in which pages of the ERG?
a)
Blue
b)
White
c)
Yellow
d)
Orange
15.
Which types of respiratory protection are atmosphere-supplying respirators where the user does not carry the breathing air source?
a)
Escape respirators
b)
Supplied-air respirators
c)
Air-purifying respirators
d)
Powered air-purifying respirators
16.
Which of the following BEST describes limitations of air-purifying respirators?
a)
Limited range of mobility
b)
Limited market availability
c)
Need for occasional atmospheric monitoring
d)
Need for normal oxygen content in atmosphere before use
17.
Which types of respiratory protection use a blower to pass contaminated air through a canister or filter to remove the contaminant and supply the purified air to the full facepiece?
a)
Escape respirators
b)
Supplied-air hoods
c)
Powered air-purifying respirators (PAPRs)
d)
Self-contained breathing apparatus (SCBA)
18.
Which of the following statements regarding chemical-protective clothing is MOST accurate?
a)
It provides excellent resistance to heat and flame.
b)
It only protects if fitted properly and worn correctly.
c)
It is designed to provide high resistance to mechanical hazards
d)
It allows work in total flame environments for short periods of time.
19.
Which type of protective clothing is designed to protect users from chemical liquid splashes, but not against chemical vapors or gases?
a)
Vapor-protective clothing
b)
Chemical-protective clothing
c)
Liquid-splash protective clothing
d)
High-temperature protective clothing
20.
Which of the following is a limitation of personal protective equipment (PPE)?
a)
Can reduce the wearer’s mobility
b)
Can add up to 50 pounds (23 kg) of weight
c)
Cannot be worn in oxygen-rich atmospheres
d)
Can only protect against one chemical at a time
21.
Which EPA level of protection includes SCBA or SAR and provides protection against splashes from a hazardous chemical?
a)
Level A
b)
Level B
c)
Level C
d)
Level D
22.
How many levels of MOPP are available?
a)
Two
b)
Four
c)
Six
d)
Eight
23.
PPE selection is determined by:
a)
time of day
b)
risk and potential hazards
c)
number of peronnel available
d)
wind speed and ambient temperatuer
24.
PPE can be determined by which of the following resources?
a)
the ERG
b)
Shipping papers
c)
Preincident plans
d)
Iincident action plans
25.
How can heat exposure be prevented?
a)
Wear long cotton undergarments
b)
Receive cool fluids intravenously, if necessary
c)
Drink warm water to regulate the body’s internal temperature
d)
Consume generous amounts of caffeinated drinks before work
100 %
