_______________ is the immediate condition of the surrounding.

The position in which someone holds their body when standing or sitting.

The joint that connects the hand with the forearm.

Injury in the muscle or body parts.

In ergonomic, what do you mean by RSI?

The first and the most important thing you do before using an input devices?

The physical contact between the PLC processor and the outside world.

The processor is connected to the external field devices using _______________.

A devices that uses an electromagnet to operate a pair of movable contacts from an open position to a closed position or vice versa.

An electromechanical valve that uses electric current to generate a magnetic field that regulates the opening of fluid flow.

A cylindrical coil of wire acting as a magnet when there is electric current.

A continuous physical quantity such as voltage and current i.e. 4-20 mA, 0- 10 VDC.

Individually separate; not continuous quantity i.e. 0 or 1.

In electrical device, the point of connection is called _________________.

A device which detects or measures a physical property and records, indicates, or otherwise responds to it

A combined electrical and mechanical system.

A typ of relay used in the PLC that does not exist in the outside world.

The diagram below represents

The symbol below is :

This PLC symbol stands for _____________.

This PLC symbol stands for _____________.

This PLC symbol stands for _____________.

How many bits in one byte?

1 word is equal to ____________ bytes

A number system which uses a base of 2 is called _____________.

A number system which uses a base of 10 is called _____________.

From the given ladder diagram, the part labelled with number 1 is called _________________.

From the given ladder diagram, the part labelled with number 2 is called _________________.

From the given ladder diagram, the part labelled with number 3 is called _________________.

From the given ladder diagram, the NC contact "CR3" is called ________________ of coil CR3.

The given ladder diagram is equivalent to ___________ gate.

The given ladder diagram is equivalent to ___________ gate.

The given ladder diagram is equivalent to ___________ gate.

The given ladder diagram is equivalent to ___________ gate.

The given ladder diagram is equivalent to ___________ gate.

The given ladder diagram is equivalent to ___________ gate.

From the given diagram.

If the value of X = 0, find the value of Y?

A __________ is a PLC function used to validate the time ranges during which actions can be executed

A __________ is a PLC function used to delay, prolong and control actions over a predetermined period

A __________ is a PLC function used to count pulses.

Normally Open contacts are also called ________________.

Normally Closed contacts are also called ________________.

This diagram is called ___________.

A class of binary encodings of decimal numbers where each decimal digit is represented by a fixed number of bits, usually four or eight.

__________________ is a combination of Mechanical, Electrical, Electronics and Computer system to develop automated system.