wayground logo

Free Printable Worksheets

Font size

S
M
L
XL
Worksheets

pre-test CRDe EXPERT

Total questions: 20

Worksheet time: 10mins

Name
Class
Date
1.
if a cable has two colours, what is the meaning of colour code ?
a)
the first colour code indicates the basic colour and the second indicates the marking colour
b)
the first colour code indicates the marking colour and the second indicates the basic colour
c)
the first colour code indicates basic colour and the second indicates the circuit colour
d)
the first colour code indicates basic colour and the second indicates the wire colour
2.
In total ECU connector has 94 pins. How many pins are numbered ?
a)
only in 10 (6 + 4) pins
b)
all 94 pins
c)
only in 12 (6 + 2 + 4) pins
d)
only in 6 pins
3.
How the ‘connector pin’ number should be read ?
a)
always read the ‘connector pin’ number from REAR – wire end only
b)
always read the ‘connector pin’ number from FRONT end only
c)
read the ‘connector pin’ number either from FRONT or REAR
d)
‘connector pin’ number is written on all connectors
4.

Which is NOT related to INLINE fuel system ?

a)

INDEPENDENT injection pressure

b)

STATIC injection timing

c)

SINGLE injection

d)

LOW injection pressure

5.
Why ‘PILOT’ injection is used in Common Rail fuel system ?
a)
to reduce NOISE
b)
to reduce EMISSION
c)
to increase POWER
d)
to reduce TORQUE vibration
6.
Why ‘POST’ injection is used in Common Rail fuel system ?
a)
to reduce EMISSION
b)
to reduce NOISE
c)
to increase POWER
d)
to reduce TORQUE vibration
7.
Why Injector BACK LEAK test is done ?
a)
to identify suspect injector from the set of injectors only
b)
to find out whether the individual injector is good or bad
c)
to measure fuel consumption
d)
to check whether IQA is correct or not
8.
What is a ‘P’ codes ?
a)
‘P’ code is Powertrain Code related to engine, transmission and emissions systems
b)
‘P’ code is Powertrain Code related to engine, and emissions systems
c)
‘P’ code is Powertrain Code related to engine only
d)
‘P’ code is Powertrain Code related to emissions system only
9.
Our CHECK LAMP in cluster is Class 2 & 3. How is the type of activation of this CHECK LAMP ?
a)
Both ‘Continuous lamp support’ & ‘Blinking lamp support’
b)
Only ‘Continuous lamp support’
c)
Only ‘Blinking lamp support’
d)
ONLY ‘on – off lamp support’
10.
Our MIL in cluster is Class 4. How is the type of activation of this CHECK LAMP ?
a)
Only ‘Continuous lamp support’
b)
Both ‘Continuous lamp support’ & ‘Blinking lamp support’
c)
Only ‘Blinking lamp support’
d)
ONLY ‘on – off lamp support’
11.
In our Diagnostic Manual, it is frequently mentioned “Check that the sensor / actuator connector pin ‘A’ is not short with battery”. What does it mean ?
a)
When I check the voltage between pin ‘A’ & tractor body, it should not show battery voltage
b)
When I check the voltage between pin ‘A’ & tractor body, it should show battery voltage
c)
When I check the continuity between pin ‘A’ & tractor body, it should beep
d)
When I check the continuity between pin ‘A’ & tractor body, it should not beep
12.

Write the full form of DC ?

(a)  

13.

Write the full form of DLC ?

(a)  

14.

Write the full form of DMM ?

(a)  

15.

Write the full form of DTC ?

(a)  

16.

Write the full form of MIL ?

(a)  

17.

Write the full form of IQA ?

(a)  

18.

Related to IQA, which statements are correct ?

a)

IQA is a code related to the calibrated flow rate of the injector.

b)

IQA code is fed into the engine ECU with cylinder number during engine assembly.

c)

IQA code enables the ECU to correct the injection quantity to compensate for manufacturing tolerances.

d)

IQA code enables PILOT injection quantity correction

19.

What are distinctive advantages of Common Rail fuel system ?

a)

High injection pressure

b)

Dynamic injection timing

c)

Capability of multiple injection

d)

Variation of injection pressure

20.

What precautions to be followed in field in CRDe engine ?

a)

Never interchange injectors between engines / ECU's

b)

Never change ECU's between tractors

c)

Never interchange injectors between cylinders in same engine

d)

Whenever an injector or ECU need to be replaced, the new injector’s IQA code need to be reflashed in to the ECU