Font size
WorksheetsCIRCUIT 1
Total questions: 93
Worksheet time: 2hrs 53mins
Why electrical wiring usually are covered with a layer of plastic?
To make it look pretty
To help electricity flow along the wire
To make it safe
To add more energy
Why is electrical wiring usually made from copper?
Because copper is shiny
Because copper conducts electricity
Because copper is not magnetic
Because copper insulate electricity
Why is a bulb brighter when it is powered by two batteries rather than one?
Because the flow of electricity in the circuit is less
Because the flow of electricity in the circuit is the same
Because the flow of electricity in the circuit is greater
Because the flow of electricity will go backward
Why is a battery important in an electrical circuit?
As a source of energy.
As a path for electricity to flow through.
As a connector to connect all parts of a circuit.
Why must parts of a circuit be properly connected before the bulb can light up?
To ensure that the bulb can light up.
To ensure that the battery can produce light in a closed circuit.
To ensure that electric current can flow through the closed circuit.
Look at the diagram. Why did the bulb not light up?
The bulb was fused.
The battery had not enough electric current to light up the bulb.
The switch was opened and prevented electric current from flowing through the circuit.
Look at the circuits in the diagram. In which circuit will the bulb be brighter?
Circuit A
Circuit B
Both circuits, the bulbs will have the same brightness.
A combination of two or more electric cells is called _____
Electric circuit
Battery
Terminals
None of these
An electric bulb has ____ terminals.
3
4
1
2
_____ is an electric device which easily closes or opens an electric circuit.
Filament
Electric bulb
Electric switch
Electric cell
A material which does not allow the electricity to pass through it is _____
Conductor
Electric cell
Insulator
None of these
What needs to be done to this circuit so that the lamp lights up?
Close the switch
Add a source and close the switch
Add another lamp
Add another lamp and a switch
1. Which switch or switches must be closed to make the lamps light?
Only switch 1
Only switch 1
Switches 1 and 2
Switches 1 , 2 and 3
Tammy makes a complete simple circuit with one bulb and three batteries. The bulb lights for an instant and then goes out. Why?
Too much electricity flows through the bulb's filament
Not enough electricity flows around the circuit
The batteries are flat
The batteries are not good
Peter has connected two bulbs across two batteries in a simple circuit. How can she make the bulbs dimmer?
Replace one of the batteries with a section of wire
Replace one of the bulbs with a section of wire
Replace one of the batteries with a cork
Replace the batteries for more wire
If lamp 1 is unscrewed from its holder, what will happen to lamp 2?
It will get brighter
It will stay the same brightness
It will go out
Nothing will happen
Why is a bulb brighter when it is powered by two batteries rather than one?
Because the flow of electricity in the circuit is less
Because the flow of electricity in the circuit is the same
Because the flow of electricity in the circuit is greater
Because the flow of electricity will go backward
Which of the following materials is an electrical conductor?
Silver spoon
Silver-colored plastic spoon
cooper spoon
wooden spoon
A material that does NOT let electricity pass through it is called ...
An electrical conductor
An electrical insulator
An electrical source
An electric appliance
A student builds a circuit made up of a battery, two light bulbs, and a switch. What will the student most likely observe in this circuit?
Light bulb 1 and light bulb 2 will both be on
Light bulb 1 will be off, but light bulb 2 will be on
Light bulb 1 and light bulb 2 will both be off
Light bulb 1 will be on, but light bulb 2 will be off
The diagram shows a series circuit with three lit bulbs. How many of the bulbs will remain lit if the wire is cut a the point shown by the arrow?
0
1
2
3
A group of students built the circuit shown above. The lightbulb does not glow. Which statement explains this observation?
The battery is not charged
The lightbulb is not part of a complete circuit
The circuit does not have a switch
The bell uses most of the energy from the battery
Students constructed a circuit using different-colored lightbulbs. What will happen if Switch 3 is closed and the other switches are left open?
Only the white bulb will operate
None of the bulbs will operate
Only the white and yellow bulbs will operate
Only the red and blue bulbs will operate
The diagram shows an electric circuit with four bells that a student plans to build. When the student connects the wire as shown, which of the bells will ring?
Bell 1 only
Bells 1 and 4 only
Bells 3 and 4 only
Bells 1, 2, 3, and 4
How many lightbulbs will work if there is a break in the circuit at POINT A?
1
2
3
NONE
What is a circuit with several paths for electricity to flow?
conductor
series circuit
parallel circuit
open circuit
A material that does NOT let electricity pass through it is called ...
An electrical conductor
An electrical insulator
An electrical source
An electric appliance
What is a circuit that only has ONE path for electricity to flow?
series circuit
closed circuit
parallel circuit
light bulb
To complete the circuit, a wire should be placed from —
When the switch is closed the buzzer will sound because -
Why does the following circuit not work?
The light bulb is broken
The switch is closed
The wood block is an insulator
The battery is dead
The circuit does not work, what could you do to allow the circuit to work?
Add another light
Add another battery
Open the switch
Remove the wood block and connect the wires
What forms of energy are you using if you close switch 1?
light and electrical
light, sound, and electrical
light
sound
In order to produce ONLY LIGHT energy, which switch(es) would you need to close?
switch 1 and switch 2
switch 1, 2, and 3
switch 2 and switch 3
switch 1 and 3
The light bulb does not turn on, which statement explains why it is not working?
The battery is dead
The light bulb is broken
The bell is taking all of the energy
The light bulb is not part of a complete circuit
Does energy flow through an open or closed switch?
open switch
closed switch
both open and closed
neither
