They are the means of access or approach (ingress) to and exit (egress) from a room, building or passage.

The frame of a doorway, consisting of two jambs and a head or lintel

An opening in a wall into which a doorframe or window frame is fitted.

The uppermost member of a doorframe or window frame.

Either of the two sidepieces of a door frame.

The Projecting part of a door frame against which a door closes; also called a stop.

A stop formed by attaching a molding to a doorframe or window frame.

a stop formed integrally by rabbeted in a door frame or window framed

a door jamb having no stops nor prepared to receive hardware

a door stop formed integrally by a rabbet in a doorframe or window frame

What part of the door is number 1?

What part of the door is number 2?

What part of the door is number 3?

What part of the door is number 4?

What part of the door is number 5?

What kind of Door stop is number 1?

What kind of Door stop is number 2?

What kind of Door stop is number 3?

The Horizontal member beneath a door or window opening.

Made from angle iron 40mm x 40mm x 6mm with iron hinges welded to frame. Joints should be flushed welded and ground smooth with grinder.

Frames are made from T Iron sections

Manufactured from mild steel sheet 1.25 mm thick

Made from steel sheets of metal that are bent and shaped into various profiles

Most commonly installed in hollow metal frames.

Most common metal used for hollow metal frames; used at interior openings

Cold-rolled steel that has been treated with a protective zinc coating which resists corrosion; frequently used at exterior openings

What type of Hollow Metal Door Frame Profile is Number 1?

What type of Hollow Metal Door Frame Profile is Number 2?

What type of Hollow Metal Door Frame Profile is Number 3?

What type of Hollow Metal Door Frame Profile is Number 4?

A metal doorframe composed of three or more parts for assembly in the field; and the least expensive.

A metal door frame that is completely set up and welded at the factory.

The joint between the head and the jamb faces are completely arc welded along their length either internally or externally.

Specified also as Fully Welded or Continuously Welded.

A metal doorframe designed to be installed during the construction of a masonry or stud wall.

Frames use for installation in existing drywall construction. Not available in welded corners.

A knockdown frame having a double return backend for installation after a drywall partition is finished

A metal doorframe completely filled with plaster or mortar for structural rigidity and increased fire resistance.

A metal doorframe prepared to receive a pair of single acting doors that swing in opposite direction.

A door having a sound-deadening core, gasketed stops along the top and sides, and an automatic drop seal along the bottom. Also called as sound-insulating door.

Doors Composed of metal facings of relatively light gauge wrapped around a core of wood or other material.

A door having a structural wood core clad with galvanized sheet metal.

Hollow and Non-Homogeneous structure; faced with melamine plastics sheets, vinyl sheets, polyvinyl fluoride films or other special-duty or decorative plastics.

Solidly build and homogeneous; it is single piece and manufactured using a unique pressure molding technique.

A door with hinged sections that can be folded flat against one another when opened. Usually used to subdivide large interior spaces with door panels.

A door that operated or moves by sliding on a track, usually parallel to a wall.

A Multi-leafed door that is hung from an overhead track and opens by folding back in the manner of an accordion.

A surface door that operates or moves by sliding on a track, usually a parallel to a wall.

A door that turns on hinges or pivots about a vertical edge when pushed or pulled.