Font size
WorksheetsCDSR
Total questions: 61
Worksheet time: 39mins
The NAVMC 5100.8 regulation provides “the requirements and guidance for commanders and Marine Corps OSH Program professionals to identify and manage risk, maintain safe and healthful operational environments, and meet Mission Essential Task List (METL) Requirements”?
False
True
(a) is the amount of core services the Installation Safety Office (ISO) provides
The 29 CFR 1960: defines the basic OSHA program elements for federal employees and applies Executive Order 12196 to the military
True
False
This is any issue, real or potential, that can cause personal injury, death, property damage, mission degradation or damage to environment?
(a)
What is the first step in the risk management process?
(a)
Implement Controls is the last step in the Risk Managment Process
True
False
You have recognized a potential hazard with a Probability of C and a Severity of I. What is the Risk Assessment Level for this hazard?
Extremely High
High
Medium
Low
Which one is NOT one of the three levels of Risk Management?
Formal
Deliberate
In-Depth
Time Critical
Where should you keep Appointment Letters, Standard Operating Procedures, Hazard Abatement Logs, facility inventory, and safety training record?
ESAMS
ANYMOUSE Box
Safety Bulletin Board
Safety Turnover Binder
Hazard Abatement Log is where you list all hazards and required corrective actions found on inspections
False
True
For the policy and procedures to implement in the RODS program you will look at what reference?
29 CFR 1910
NAVMC 5100.8
MCO 5100.30
MCO 5100.29C
It is the (a) responsibility to ensure training provided to Marines and civilian employees includes recreation and off-duty (RODS) activities
Vehicle sports, mountain sports, aerial sports, and water sports are considered what type of recreational activity?
Immediately Dangerous to Life and Health
Ashore
High Risk
Operational
In regard to MHE, and reference 5100.29C all MHE operators must be?
Qualified and Licensed
Licensed and Supervised
Trained and Licensed
Trained and Supervised
What are the most common MHE mishaps?
Tipovers, crushed by/struck by MHE, falling off MHE, and refueling/changing batteries (140-3) (Review)
. Forklift overloads, driver inexperience, rope burns from slings, and improper release of banding material
Forklift overturns, crushed by cranes, rope burns from slings, and eye injuries from lack of PP
Forklift overturns, texting while driving, crushed while falling off, and changing batteries
In regard to MHE, Employers must also certify that each operator has received the training and evaluate the operator at lease once every (a) years, if not sooner?
Education, Enforcement, Engineering are the three DRIVESAFE program elements?
False
True
To reduce driver fatigue, all drivers will be provided ______ consecutive hours of rest (OFF DUTY) during any ______ hour period?
4, 12
8, 12
8, 24
8, 48
Marines under 26 years of age must receive a minimum of __ hours of education within ___ days of reporting to their first gaining command?
6, 60
4, 60
6, 90
4, 90
(a) is the most common route of exposure to the body
This is a document that focuses on "workplace monitoring" and lets personnel know of any potential over-exposed chemicals or physical hazards?
Job Hazard Analysis
Medical Surveillance screening
Industiral Hygiene Survey
Standard Operating Procedures
What is a regulatory limit set by OSHA on the amount of concentration of substance in an air, above which would be hazardous to employees?
Occupational exposure limit (OEL)
Time-weighted average
Threshold Limit Value (TLV)
Permissible Exposure Limit (PEL)
The affected worker is defined as a person who's job requires operating or using a machine or equipment on which maintenance is being performed under Lockout/Tagout.
False
True
When is a Lockout/Tagout procedure required?
when machinery or equipment is permanently taken out of service
when machinery or equipment is used for the last time in a work day
when machinery or equipment has the potential to start up or release stored energy while being serviced or maintained
when machinery or equipment has caused a mishap or lost time accident
Which of these require lockout/tagout training?
Employees
Authorized/affected/other employees in the area
Authorized workers
Affected Workers
when must portable fire extinguishers or hoses used in lieu thereof under 29 CFR 1910.157 be visually inspected?
Annually
Weekly
Daily
Monthly
This person is appointed and then made responsible for the day-to-day fire prevention regulations within their designated building and facilities.
(a)
The Emergency Action Plans (EAP) purpose is to facilitate and organize employer and employee actions during workplace emergencies.
True
False
Select all that apply:
An Emergency Action Plan (EAP) must be:
In writing
Posted in the workplace
Available for employees review
Emergency Prevention Plan is a certification survey of a hazard assessment and includes a list of the specific types of PPE required for jobs?
True
False
Emergency Eyewash facilities shall be provided?
In all areas where corrosive chemicals are used or stored
Within one minute walking distance of corrosive chemicals
At all local medical treatment facilities
In some areas where hazardous materials are used or stored
Select all that Apply:
Who is responsible for ensuring the unit supports the Marine Corps OSH Program by acquiring, maintaining, and requiring the use of approved Personal Protective Equipment (PPE)?
Commanders
Managers
Employees
Affected personnel
Per OSHA all employers are required to provide electrical safety training to all personnel, regardless of whether or not they work with electricity
True
False
This safety device protects people by sensing then electricity is flowing along and unintended path
Surge Protector
Ground Fault Circuit Interrupter GFCI
Circuit Breaker
Power Strip
Extensions cords are only allowed ?
to have 2 prongs
When they are plugged into another extension cord
For Temporary use
when protected by an power strip
Leakage, Excessive heat, or exposure to water is what must be checked on stored lithium batteries... how often must you check them?
annually
bi annually
bi weekly
daily
Personnel should be trained on hazardous chemicals in their workplace when?
Daily
Initially assignment
Whenever a new chemical hazard is introduced
annually
HAZCOM is a...
control system of protecting workers from exposure during storage and disposal of HAZMAT
program mandated by the environmental protection agency to ensure safe storage, transport, and disposal of hazardous waste.
program that ensures workers have the right to know and understand hazardous chemicals and how to work with them safely
program to standardize labeling and storage of hazardous materials and hazardous waste
The (a) has cognizance for all asbestos related activities aboard the installation or unit.
Asbestos is most hazardous when it is ________?
Untoched
Initially being used
Sat for over 15 years
Friable
Select ALL that Apply:
Lead can be found in...
all parts of the environment
air
soil
water
Noise above ____dB can cause permanent damage to hearing after just one exposure?
101
85
80
140
Annual refresher hearing conservation training and hearing tests are required for all of the following EXCEPT?
All Marines
All Civilians
Assigned Sailors
Hazardous Noise-Exposed Civilians
If the sound is so loud that you must raise your voice to be understood at a distance of (a) feet, it is potentially hazardous.
NIOSH recommends that workers shall be required to wear hearing protection when engaged in in work that exposes them to noise that equals or exceeds 85dBA dBA as an 8-hour TWA.
True
False
Select all that apply:
A qualified respirator user needs all of these to remain qualified
A Serviceable Respirator
Respirator Fit Test
Medical Surveillance
Respirator Training
Select all that Apply:
Which of these hazards is a main type of respiratory hazard?
Oxygen deficiency
Particulate contaminants
Nitrogen
gases and Vapors
VOLUNTARY respirator users (particulate only filtering dust masks) must be?
Trained on proper use and care of their mask
Medically surveilled
Fit Tested
Given a pulmonary function test
Select all that Apply:
A confined space has to have all of these characteristics
Is not designed for continuous employee occupancy
Has limited or restricted means for entry or exit
Is at least 6 feet deep
Is large enough and so configured that an employee can bodily enter
A confined space that can potentially engulf a employee, potentially have a hazardous atmosphere, or has a recognized serious safety or health hazard is classified as a …?
Death Trap
Enclosed Space
Permit-Required Confined Space
Immediately Dangerous to Life or Health (IDLH) Space
The DON Fall Protection Guide is endorsed by the Marine Corps and is the most comprehensive guide for fall protection
True
False
Select all that apply:
these are hazard controls that can prevent slips and trips.
Good Housekeeping
Keep walking and working surfaces clear of tools and materials
Clean up spills immediately
Sweep stuff under the rug/carpet
What is the height that Marine Corps and Navy civilian personnel exposed to fall hazards of any elevated walking working surface shall be provided fall protection?
3ft or higher
4ft or higher
6ft or higher
10ft or higher
When climbing a ladder, the most important rule is?
Three points of contact
Do not carry anything
Do not stand on the top step
Three points of Control
The Exposure Control Plan is designed to identify, in writing, tasks and procedures, as well as job classifications, where occupational exposure to blood or other potentially infectious materials occurs.
False
True
This is the practice of avoiding contact with bodily fluids by means of wearing nonporous PPE and treating all blood and other potentially infectious materials as if it is contaminated.
(a)
Select all that apply:
These are ways to prevent rodent infestation.
Removing Food Sources
Removing Water Sources
Removing Sources of Shelter
Removing rat traps
Select all that apply:
what are the major considerations when designing a base camp
Health
Safety
Traffic
Welfare
Select all that apply:
What are the Common Contributing Factors of Fire Mishaps encountered in FOBS
Misuse of electrical appliances
Unsafe Practices such as daisy-chained electrical appliances
overloaded circuits
Too many fire extinguishers
Route Recon is a tactical vehicle hazard.
True
False
What is the height that Marine Corps and Navy civilian personnel exposed to fall hazards of any elevated walking working surface shall be provided fall protection?
3ft or higher
4ft or higher
6ft or higher
10ft or higher
