A French tailor, Barthelemy Thimonnier invented the first functional sewing machine that has one thread and hooked needle used in embroidery machine. What is the machine stitch of his invention?

They think up the combinations of line, proportion, color , and texture for intended garments.

A flexible tape used to take body measurement.

A machine that is run by foot which may also be converted to electric power machine is known as .

A machine used in making fancy stitches on fabrics is ______.

It is a machine part that is used to start and stop the operation of the sewing machine.

In sewing operation, the materials are moving against the sewer. What makes the materials move when sewing?

The direction in which the hand wheel should be turned.

The part of a sewing machine that holds the fabric in place while sewing.

The part of the sewing machine that controls the bobbin while winding the thread is known as.

The mechanism that sets the sewing machine in motion is _____.

This takes the thread up and down the needle

Which of the following sewing importance that encourages mindfulness and reduces anxiety?

Which of the following is NOT one of the steps of the 5S method?

Which of the following is NOT good practice in the workplace?

Which of the following is the best practice in handling the sewing machine?

Kim needs 2 pieces of 6" x 10" cloth for his project. Which of the following tools best to use in cutting the cloth?

The trainees are performing the mock-up of hand stitches. Most of their hand needles are blunt. Which of the following sewing aid to use to polish their blunt needle?

Which of the following hand stitches used as permanent stitches and it can replace as machine stitching on the right side of the garment?

Which of the following is fancy stitches using hand needle and thread?

Industrial sewing machine has automatic lubrication and the highest number of units in the companies, factories and even in schools because it is known as the standard sewing machine. Which of following machine needle used in single needle lockstitch machine?

Which of the sewing machine used in finishing the raw edge?

Which of the following is the standard size of the machine needle?

Which of the following upper threading that regulates the looseness and tightness of the thread?

Which of the following bobbin case part used to lock and unlock to the shuttle?

Which part of the bobbin winder that regulate the arrangement of the thread on the bobbin?

This controls how fast the machine sews.

A material that requires a longer stitch, a coarser thread, a larger needle, and less tension.

The following are the characteristics of good stitches except.

A fiber direction that runs parallel to the selvage of the fabric.

To prevent fraying the fibers of a fabric finishing the raw edges are made in the factory. What do you call the finished edge of the fabric?

It is the common materials used in producing round rags.

The 5S method process improvement was created to help

Jerome is sewing the threaded machine exercises and he notice that the lower stitches are loose. His teacher told him to set-up the upper thread properly. How will he correct the upper threading of his sewing machine?

How does the lower threading done in setting the sewing machine?

Vincent is sewing the school pants. Along with the operation he is keep on replacing the lower thread and suddenly the lower stitches become puckered because of incorrect winding of the thread. How will he rewind the thread properly to the bobbin ?

In setting up the sewing machine must be taken into account to produce good stitches for operating an item. In the process of stitching Tommy found out that the lower stitches are too tight and even breaking. Why there is a need to balance the lower tension of the threading?

As a sewer, when are you going to reinforce the stitches in every sewing operation?

Standard tension for lower thread mm just be observed prior to sewing. Unbalanced tension will cause problem to the stitches. What will you do if the lower thread breaks?

Proper procedure in setting up the sewing machine is recommendable to all sewers. In same case rewinding, the thread of the lower spool must be done well. Why do you lift the presser foot while doing the process?

You are assembling the school polo as your performance task. Since speed is one of the criteria, you set-up directly the machine and sew the item without realizing that you failed to follow the instruction of your teacher to use the same color of thread to the item and you finished sewing already and your lower stitches have different color. What will you do to the item and lower thread spool?

Why do you think it is important to coordinate the hand and foot in operating the sewing machine?

As a tailor, it is your responsibility to check the sewing machine on it's good running condition before starting to sew. You found out that the machine has no belt. How will you attach properly the machine belt?

You are about to operate the standard sewing machine, as beginner you need to undergo the treadle control activity. For you to master controlling the single movement of the needle, you must perform the single dot attempts. How will perform the trial correctly?

You have difficulties in sewing circular rag as your project. The circular row of stitches is not done smoothly and there are corner of stitches because you failed to practice controlling the treadle's activity prior the project. How do the treadle control's exercises help you in sewing curve lines?

Thomas is kept on ripping the stitches of his project because of skipping stitches. So, he stops and check the possible cause of the fault like the threading, position of the needle long groove and feed regulating dial. What do you think is the cause of the uneven length of the stitches?

You are adjusting the treadle of you machine for your machine exercises immediately after adjusting your turn-on the machine and accidentally press the treadle, this may cause the machine to overheat and smoke. What is your immediate action to take?

How will you correct loose top stitches of the machine?

During your round rag operation, you observed that the lower stitches were too loose. How will adjust the tension of the lower thread?