WorksheetsProject Readiness Test
Total questions: 65
Worksheet time: 33mins
When using the case method for measuring the inner dimensions of a drawer, what measurement do you also need to know?
the outside of the drawer
the length of the case
the length of the blade
the curve
Which of the following is a three-sided layout tool that is used to draw straight lines and to lay out angles?
combination square
protractor
speed square
framing square
Between each foot marking on a tape measure are which of the following numbers?
2 through 10
2 through 11
1 through 11
1 through 10
Which of the following tools consist of a metal blade attached to a wood or metal head with a locking device?
sliding T-bevel
protractor
combination square
chalk box
The process of measuring and marking materials is called creating a(n) ____________.
layout
blueprint
design
sketch
The length of a straight line is referred to as a(n) ____________ measurement.
linear
circular
angular
volumetric
Which of the following tools is used for constructing circles and arcs?
compass
protractor
sliding T-bevel
combination square
To draw a 7"wide circle, you need to set your compass to a radius of ____________.
3 1/2"
7"
14"
1 3/4"
A sliding T-bevel is used to lay out or transfer ____________.
angles
lengths
volumes
temperatures
An idea written down in the form of a drawing is called a(n) ____________.
sketch
diagram
blueprint
Any of the above.
A tool is considered to be any object or device that makes it easier to accomplish a task.
True
False
A framing square is used to check 45° angles.
True
False
A straightedge is better than a chalk box for marking a long straight line.
True
False
Layout requires a basic understanding of mathematics, including geometry.
True
False
The blade of a tape measure will tell you both the number of inches past the previous foot marker as well as the total number of inches in the measurement.
True
False
12" Framing Square
Combination Square
Speed Square
24" Framing Square
Combination Square
Speed Square
Caliper
Framing Square
6" Combination Square
Speed Square
L Square
12" Combination Square
Name the tool.
Protractor
Balloon launcher
T bevel
Compass
Name the tool.
Plumb bob
Sliding T-bevel
Torpedo level
Compass
Name the tool.
Tape measure
T bevel
Chalk line
Laser level
Ruler
Caliper
Combination Square
Tape Measure
The edges of most measuring tools are marked in inches and fractions of an inch. Each inch is subdivided into how many parts?
(2 parts) 1/2"
(4 parts) 1/4"
(8 parts) 1/8"
(16 parts) 1/16"
Which is larger, an inch, or a centimeter
Inch
Centimeter
How many inches are in one foot?
12
120
10
3
How many feet are in one yard?
1
10
7
3
How many inches are in one yard?
136
12
36
the arrow indicates what measurement?
5 3/16"
4 3/4"
4 13/16"
4 11/16 "
the arrow indicates what measurement?
11 1/16"
11 1/8"
11 1/4"
11 1/2"
the arrow indicates what measurement?
1 2/4"
2 1/8"
3 7/8"
2 1/16"
the arrow indicates what measurement?
9 1/4"
9 1/8"
9 1/16"
9 1/2"
the arrow indicates what measurement?
6 1/16"
7 1/2"
6 1/2"
6 1/4"
the arrow indicates what measurement?
11 1/8"
11 1/16"
10 3/4"
10 7/8"
the arrow indicates what measurement?
4 1/8"
4 1/4"
5 1/4"
4 1/2"
What does 2 4/8" reduce to?
2 1/2"
2"
2 5/16"
3"
Which of the following is defined as an unplanned event that results in damage to property?
hazard
injury
accident
violation
Which of the following can often result in carelessness when operating a tool?
using a tool repeatedly
wearing gloves
learning to use a new tool
awareness of your surroundings
Which of the following is a form of PPE?
flammable substance
abrasion
good communication
safety glasses
Which of the following is an example of a safety device on a tool?
gloves
hazard
PPE
guards
Keeping your work area clean is known as which of the following?
personal protective equipment
good housekeeping
ergonomics
good communication
6. ____________ is an important two-word phrase that means safe work practices must always be your main priority.
safety first
work hard
team effort
quick response
Anything that can cause harm to you or to others is known as a(n) ____________.
hazard
violation
problem
unsafe
Lack of ____________ with tools is one of the most common causes of work-related injuries.
training
patience
luck
strength
You should know the location of the ____________ in your work area in case you need emergency safety supplies.
first aid kit
coffee machine
printer
vending machine
A(n) ____________ is any sort of damage done to the body.
injury
medicine
exercise
vitamin
Safety is a less important concern with hand tools than it is with power tools.
True
False
Storing tools properly is a way of practicing safe work habits.
True
False
Loose clothing is considered a safety hazard.
True
False
Heavy materials should be placed as near as possible to the area where they will be used.
True
False
When you see a hazard you should tell your instructor, supervisor, or anyone else in the area.
True
False
Which of the following types of lumber is the softest?
Douglas fir
pine
cedar
oak
Which of the following materials is often used in applications where the finished appearance of the material is not important, such as drawer bottoms or cabinet backs?
pressboard
plywood
pine
cedar
Which of the following lumber defects are usually found just at the ends of boards?
splits
knots
pitch pockets
checks
Which of the following terms refers to the size of a board that has been rough sawn from a log?
actual size
nominal size
estimated size
proportional size
Which of the following is constructed of wood fibers that are joined under heat and pressure?
plywood
oriented strand board
pine
pressboard
The presence of bark along the edge or corner of a piece of lumber is a defect called a(n) ____________.
knot
check
wane
split
A board measuring 1” x 6” x 10’ is ____________ wide.
6 inches
1 inch
10 inches
12 inches
A curve along the face, edge, or length of a board is a(n) ____________ and is caused by improper storage.
warp
knot
split
grain
A thin-gauge nail used to avoid splitting the grain of the wood is called a(n) ____________.
brad
spike
screw
bolt
When measuring lumber, all boards have ____________, width, and length.
thickness
color
weight
grain
In most cases, plywood is stronger than natural wood.
True
False
Nails have better holding power than screws.
True
False
Yellow wood glue will typically also work with metal, glass, and adhesives.
True
False
A branch in the tree leaves behind a defect called a wane.
True
False
A “two penny” nail is represented by the number and letter combination 2p.
True
False
