WorksheetsUnit 312 - Electrical authority, legislation and safety
Total questions: 45
Worksheet time: 23mins
Which of the following is an example of an electrical procedure a plumber may perform?
Earth bonding
Painting walls
Installing carpets
Baking bread
Under the Approved Document Part P regulation, when is a plumber not required to be Part P qualified?
When replacing a like-for-like component
When working in a danger zone
When installing new electrical systems
When working on a swimming pool
Who must undertake work in a danger zone according to Building Regulations Part P?
A plumber
A fully qualified electrician
A general contractor
A building inspector
Which of the following is considered a danger zone under Building Regulations Part P?
A kitchen
A room with a bath or shower
A living room
A bedroom
According to the Health and Safety at Work Act 1974 (HASAWA), what must a plumber do while working on site?
Use tools and equipment incorrectly
Ignore damaged equipment
Work safely and consider those around them
Disregard employer instructions
What is essential regarding damaged equipment according to the responsibilities outlined?
Leave it in service
Ignore it
Remove it from service and report to employer
Use it until it breaks
What should a plumber always do in relation to their employer?
Disobey instructions
Cooperate with them
Work independently
Avoid communication
What do the EAW (Electricity at Work) Regulations cover?
Installation, testing, and maintenance of commercial electrical systems
Design and construction of residential buildings
Manufacturing of electrical appliances
Sales and marketing of electrical products
According to the EAW Regulations, what must be done with damaged equipment?
It should be repaired immediately
It should be taken out of service
It should be sold at a discount
It should be used with caution
What is required of an engineer under the EAW Regulations?
They must work independently at all times
They should only do tasks they are qualified for or be suitably supervised
They must supervise all tasks on site
They should perform all tasks regardless of qualification
What do the CDM (Construction Design and Management) Regulations emphasize?
The importance of architectural design
The duty of care for health and safety on a construction site
The need for rapid construction
The focus on cost reduction
What should be in place according to the CDM Regulations?
A financial plan for the project
An appropriate safety plan for site work
A marketing strategy for the construction
A timeline for project completion
What do the CDM (Construction Design and Management Regulations) require for a construction site?
Aesthetic design plans
Financial management plans
An appropriate safety plan
Marketing strategies
Which aspect of building construction is NOT covered by Building Regulations?
Electrical safety
Fire safety
Landscaping
Ventilation
What does Approved Document Part P of the Building Regulations cover?
Energy efficiency
Electrical work
Plumbing systems
Structural integrity
Why should manufacturers' instructions be followed?
To ensure aesthetic appeal
To ensure correct installation and operation
To reduce costs
To increase sales
What is the requirement for electrical installations according to the document?
BS 7671 (design, installation, and testing)
BS 1234 (safety and maintenance)
BS 4321 (installation and repair)
BS 6789 (design and safety)
What are the 18th edition IET Wiring Regulations also known as?
British Standard BS 7671
British Standard BS 1234
British Standard BS 4321
British Standard BS 6789
In what year did the IEE Wiring Regulations become British Standard BS 7671?
1992
1985
2000
1978
What is the purpose of a minor works certificate?
To install a new circuit
To indicate responsibility for design, construction, inspection, and testing
To replace major electrical systems
To certify large-scale electrical projects
Which tasks should a competent person be able to carry out for a minor works certificate?
Insulation resistance, earth loop impedance, polarity, and RCD operation
Circuit design, installation, and maintenance
Major electrical system overhauls
New circuit installations
What does the signing of the minor works form confirm?
The installation of a new circuit
The safety of the existing installation is not impaired
The completion of a major electrical project
The need for further inspections
Who is authorized to issue a minor works certificate?
Any electrician
A Part P qualified operative
A construction manager
A building inspector
What does Part P usually require before electrical work can be carried out on domestic premises?
Notification of works to the planning department
Approval from a registered competent person
Installation of a new boiler
Completion of a safety course
When is electrical work considered non-notifiable under Part P?
When it is carried out by a registered competent person or is minor work
When it involves installing a new circuit
When it requires a new power supply
When it is done in a commercial building
Which of the following is an example of minor work?
Installation of a spur outlet for a boiler
Installation of a new electrical panel
Rewiring an entire house
Installing a new lighting system
What should be recorded on the minor electrical installation works certificate?
Type and rating of the protective supply device
The color of the wires used
The brand of the equipment installed
The name of the electrician
What must be satisfied according to Part P for electrical safety?
All fundamental principles as specified in British Standard 7671:2018
The installation of new safety devices
Approval from the local council
Completion of a safety training program
What should be considered when referring to the method statement in a risk assessment?
Access to the worksite and others working there
The color of the equipment
The time of day
The weather conditions
What should be included in a risk assessment regarding systems and equipment?
The brand of the equipment
The integrity and working conditions
The color of the equipment
The age of the equipment
What is a necessary step in identifying hazards on a site?
Walking around the site and listing them
Asking the manager
Reading a manual
Watching a video
What should be included in a risk assessment regarding environmental factors?
The presence of tripping hazards and excessive noise
The color of the walls
The type of flooring
The number of windows
What should be assessed regarding other contractors in a risk assessment?
Their lunch breaks
Their operations and any COSHH concerns
Their uniforms
Their transportation
What guideline should be followed in a risk assessment?
The HSE five steps to risk assessment
The company's dress code
The local weather report
The employee handbook
What is the first step in the HSE's five-step guide to completing a risk assessment?
Evaluate the risks and decide on precautions.
Identify the hazards.
Record your findings and implement them.
Review your risk assessment and update, if necessary.
What should you do after recording your findings in a risk assessment?
Identify the hazards.
Decide who might be harmed and how.
Implement them.
Evaluate the risks and decide on precautions.
What is the final step in the HSE's risk assessment guide?
Record your findings and implement them.
Review your risk assessment and update, if necessary.
Identify the hazards.
Evaluate the risks and decide on precautions.
What is the responsibility of an engineer working on site?
To ignore risk assessments
To focus only on their own safety
To recognize the importance of carrying out a risk assessment
To work without cooperating with others
Why is it essential for engineers to cooperate with their employer?
To avoid working safely
To comply with HASAWA
To increase personal risk
To ignore potential hazards
What should engineers continually reassess on site?
The number of workers
The design of the building
The risks of new potential hazards
The cost of materials
What should a plumber's responsibility regarding electrical work not exceed?
Their level of competence
Their level of interest
Their level of experience
Their level of education
What should you do if you are not confident in carrying out electrical installations?
Proceed with caution
Ask a friend for help
Do not carry out the work
Try it anyway
What can a plumber replace without being Part P registered?
A like-for-like component
A new circuit
A significant part of an installation
An entire electrical system
Who must be Part P qualified?
Anyone installing a new circuit
Anyone replacing a light bulb
Anyone painting a wall
Anyone cleaning a fan
What should you do when in doubt about electrical work?
Continue working
Contact an electrician
Ask a neighbor
Search online
