NEW
Font size
WorksheetsFAR part 36
Total questions: 80
Worksheet time: 40mins
What is the focus of Subpart 36.3 in the document?
Two-Phase Design-Build Selection Procedures
Special procedures for price negotiation
Performance of work by the contractor
Accident prevention
Which section deals with the performance of work by the contractor?
36.501
36.503
36.505
36.507
What is covered under section 36.509?
Protection of existing vegetation, structures, equipment, utilities, and improvements
Site investigation and conditions affecting the work
Superintendence by the contractor
Schedules for construction contracts
Which section addresses accident prevention?
36.513
36.511
36.515
36.516
What is the purpose of a preconstruction conference as mentioned in the document?
To finalize the construction budget
To discuss specifications and drawings
To negotiate contract terms
To evaluate firm qualifications
Which section deals with the selection criteria for architect-engineer contracts?
36.601-2
36.602-1
36.603
36.606
What is the focus of section 36.608 in the document?
Contract clauses
Liability for Government costs from design errors
Performance evaluation
Site visit
Which section addresses the release of information on firm selection?
36.605
36.607
36.609
36.601
What does "Construction and demolition materials and debris" refer to in the context of the document?
Materials used in new construction projects
Waste materials and debris generated during construction, renovation, demolition, or dismantling
Recyclable materials only
Energy-efficient building materials
What is the meaning of "Diverting" as used in the document?
Sending materials to waste-to-energy facilities
Redirecting materials from disposal in landfills to recycling or recovery
Disposing of materials in landfills
Burning materials for energy
What does a "Modernization project" include according to the document?
Building new structures
Comprehensive replacement or restoration of major systems and interior finishes
Painting and minor repairs
Landscaping and exterior work
What is the scope of the part described in the document?
Policies for residential construction only
Procedures for contracting for construction and architect-engineer services
Guidelines for environmental conservation
Standards for international trade
What does the term "Contract" refer to in this document?
A contract for construction or architect-engineer services
A contract for supply chain management
A contract for legal services
A contract for educational services
What is the meaning of "Design" as defined in the document?
Creating artistic blueprints
Defining construction requirements and preparing cost estimates
Designing interior decorations
Planning marketing strategies
What does "Design-bid-build" refer to?
A method where design and construction are combined in one contract
A method where design and construction are sequential and contracted separately
A method for designing only
A method for bidding only
What is the role of a "Firm" in conjunction with architect-engineer services?
To provide legal advice
To practice architecture or engineering
To manage financial accounts
To conduct market research
What are "Record drawings"?
Drawings for future projects
Drawings submitted to show completed construction
Drawings for artistic purposes
Drawings for marketing presentations
What is the "Two-phase design-build selection procedure"?
A method for selecting a large number of offerors
A method for selecting a limited number of offerors in two phases
A method for selecting offerors based on price only
A method for selecting offerors based on design only
What is the traditional acquisition approach for design and construction of a public building?
Design-bid-build
Design-build
Construction management
Integrated project delivery
What is the minimum gross square footage for new construction projects to meet Federal sustainable design principles?
10,000 square feet
15,000 square feet
25,000 square feet
30,000 square feet
What percentage of non-hazardous construction and demolition materials should be diverted to ensure pollution prevention?
25 percent
50 percent
75 percent
100 percent
At what estimated construction cost must a project labor agreement be used for Federal construction projects?
$10 million
$20 million
$35 million
$50 million
What must construction specifications conform to according to the document?
The requirements in part 11 of the regulation
The contractor's personal preferences
The lowest cost option available
The most recent industry trends
Who is responsible for ensuring that references in specifications are to widely recognized standards?
Construction workers
Contracting officers
Project managers
Government officials
When are independent Government estimates of construction costs required?
When the cost of required work is not anticipated to exceed the simplified acquisition threshold
For every construction project, regardless of cost
Only for projects exceeding $10 million
When the project is completed
What should advance notices and solicitations state regarding construction projects?
The exact cost of the project
The magnitude of the requirement in terms of physical characteristics and estimated price range
The names of all contractors involved
The expected completion date
What is a requirement for contracts for construction according to statutory cost limitations?
They must always exceed statutory cost limitations.
They cannot exceed statutory cost limitations unless waived in writing.
They must be awarded at the lowest possible cost.
They can exceed statutory cost limitations without any conditions.
What must be included in solicitations subject to statutory cost limitations?
A single price for all items.
A detailed list of all indirect costs only.
Separately-priced schedules for each affected item.
A general estimate of total costs without specifics.
Under what condition can the Government reject an offer even if it is within statutory limitations?
If the offer is the lowest bid.
If the offer is materially unbalanced.
If the offer includes all direct costs.
If the offer is submitted on time.
Who must evaluate the need for liquidated damages in a construction contract?
The project manager.
The contracting officer.
The construction worker.
The financial advisor.
What is the preferred method of pricing for firm-fixed-price construction contracts?
Lump-sum pricing
Unit-price pricing
Cost-plus pricing
Time-and-materials pricing
Under what condition can fixed-price contracts with economic price adjustment be used?
When the project is small
When the work is simple
When it is customary for the type of work being acquired
When the contractor prefers it
What is required for the concurrent performance of firm-fixed-price and other types of construction contracts?
Approval from the project manager
Approval from the head of the contracting activity
Approval from the contractor
Approval from the site engineer
Who must approve the award of a construction contract to the firm that designed the project?
The project manager
The head of the agency or authorized representative
The contractor
The site engineer
What should the contracting officer arrange for prospective offerors?
A tour of the construction site
A meeting with the project manager
An inspection of the site and examination of data
A review of the project budget
What is the purpose of distributing advance notices and solicitations according to the document?
To reach as many prospective offerors as practicable.
To limit the number of prospective offerors.
To ensure only local offerors are informed.
To exclude subcontractors from the process.
What must the contracting officer include in the notice for construction contracts?
A list of all subcontractors.
Information on equitable adjustments for change orders.
A detailed project timeline.
A summary of past successful projects.
How many fiscal years of past performance data should agencies provide if fewer than 3 years are available?
Only the most recent year.
All available fiscal years.
No data is required.
Exactly three years.
What is the role of the contracting officer in preconstruction orientation?
To conduct the construction work
To inform the successful offeror of significant matters of interest
To finalize the construction contract
To manage the construction site
When should the preconstruction conference be conducted according to the contracting officer's responsibilities?
After the construction work is completed
During the construction work
Prior to the start of construction at the work site
After the first phase of construction
What should the contracting officer notify the successful offeror about regarding the preconstruction conference?
The budget and financial details
The date, time, and location of the conference
The construction techniques to be used
The names of all subcontractors
What is the purpose of the explanatory letter or preconstruction conference issued by the contracting officer?
To finalize the construction contract
To provide an overview of the construction project
To address significant matters of interest and responsibilities
To introduce the construction team
What must presolicitation notices describe in sufficient detail?
The weather conditions during construction
The proposed work's nature and volume
The history of the contracting company
The number of workers required
What is one of the requirements for presolicitation notices according to the document?
They must include the contractor's previous projects
They must state the location of the work
They must provide a list of potential bidders
They must include a map of the area
What should invitations for bids allow sufficient time for?
Contractor selection
Bid preparation
Project completion
Budget approval
What must be included in each invitation for bids, according to the contracting officers?
A list of subcontractors
The appropriate wage determination
A timeline of previous projects
A map of the construction site
What must be included in a notice of award according to section 36.213-4?
The contractor's bid and the award price
The contractor's personal details
The contractor's previous projects
The contractor's financial history
What should the contracting officer do if the proposed cost differs significantly from the Government estimate?
Ignore the difference
Request the offeror to submit cost information
Automatically reject the proposal
Accept the proposal without changes
Which section outlines the special procedures for price negotiation in construction contracting?
36.213-4
36.214
14.207
5.102(a)
What should a contracting officer ensure when a proposed price is significantly lower than the Government estimate?
The offeror and the Government estimator understand the scope of the work.
The offeror alone understands the scope of the work.
The Government estimator alone understands the scope of the work.
The proposed price is accepted without changes.
What is a cost-reimbursement contract used for in construction?
To acquire construction when consistent with subpart 16.3 and part 15.
To acquire construction without any limitations.
To acquire construction only for small projects.
To acquire construction without considering any subparts.
When should the two-phase design-build selection procedures be used?
When three or more offers are anticipated.
When only one offer is anticipated.
When no offers are anticipated.
When two offers are anticipated.
What must offerors do before developing price or cost proposals in the two-phase design-build selection procedures?
Perform design work.
Submit final proposals.
Negotiate contracts.
Complete construction.
Which of the following is a criterion considered in the two-phase design-build selection procedures?
The capability and experience of potential contractors.
The color of the construction site.
The number of workers on site.
The location of the project.
What is the purpose of developing a scope of work according to the document?
To define the project and state the Government’s requirements
To provide detailed design and technical information
To establish cost or price related factors
To determine the maximum number of offerors
What is included in Phase One of the solicitation process?
Detailed design and technical information
Cost or price related factors
Technical approach and qualifications
Final contract award
Which of the following is NOT a factor considered in Phase One evaluation?
Technical approach
Cost or price related factors
Specialized experience
Past performance
What is the maximum number of offerors that can be selected to submit phase-two proposals unless otherwise determined?
Three
Five
Seven
Ten
What is required of the contracting officer after evaluating phase-one proposals?
Select the most highly qualified offerors
Approve all proposals
Reject all proposals
Submit new proposals
In accordance with which part should Phase Two of the solicitation(s) be prepared?
Part 15
Part 10
Part 20
Part 5
What does Subpart 36.5 prescribe provisions and clauses for?
Construction and dismantling contracts
Financial audits
Marketing strategies
Employee benefits
What is the minimum percentage of work a contractor must perform with its own forces, unless otherwise required?
12 percent
5 percent
20 percent
15 percent
When should the contracting officer insert the clause at 52.236-1, Performance of Work by the Contractor?
When a fixed-price construction contract is expected to exceed $1.5 million.
When a fixed-price construction contract is expected to be $1.5 million or less.
When a fixed-price dismantling contract is expected to exceed the simplified acquisition threshold.
When a fixed-price contract for removal of improvements is expected to be at or below the simplified acquisition threshold.
What is the purpose of the clause at 52.236-2, Differing Site Conditions?
To provide physical data to offerors.
To address differing site conditions in fixed-price construction contracts.
To ensure material and workmanship standards.
To outline superintendence by the contractor.
Under what conditions should the clause at 52.236-3, Site Investigation and Conditions Affecting the Work, be inserted?
When a fixed-price construction contract is expected to exceed $1.5 million.
When a fixed-price dismantling contract is expected to exceed the simplified acquisition threshold.
When physical data will be furnished to offerors.
When material and workmanship standards are required.
What type of data is provided under the clause at 52.236-4, Physical Data?
Material and workmanship standards.
Superintendence requirements.
Test borings, hydrographic data, weather conditions data.
Differing site conditions.
In what type of contracts is the clause at 52.236-5, Material and Workmanship, inserted?
Construction contracts.
Dismantling contracts.
Demolition contracts.
Removal of improvements contracts.
In which type of contract should the clause at 52.236-7, Permits and Responsibilities, be inserted?
Fixed-price construction contract
Cost-plus contract
Time and materials contract
Indefinite delivery contract
What is the clause number for Protection of Existing Vegetation, Structures, Equipment, Utilities, and Improvements?
52.236-7
52.236-8
52.236-9
52.236-10
When should the clause at 52.236-10, Operations and Storage Areas, be inserted?
When a cost-reimbursement contract is contemplated
When a fixed-price construction contract is contemplated
When a time and materials contract is contemplated
When an indefinite delivery contract is contemplated
In which type of contract should the contracting officer insert the clause at 52.236-11?
Fixed-price construction contract
Cost-plus contract
Time and materials contract
Indefinite delivery contract
What is the purpose of the clause at 52.236-12?
Accident prevention
Cleaning up
Use of utility services
Contract termination
When should the contracting officer use the clause with its Alternate I according to 52.236-13?
When the contract involves a short duration
When the contract involves a long duration or hazardous nature
When the contract is below the simplified acquisition threshold
When the contract is for utility services
What should the contracting officer do if a contractor is notified of serious or imminent dangers?
Ignore the notification
Inform the Occupational Safety and Health Administration (OSHA)
Terminate the contract
Increase the contract amount
What must the contracting officer list when using the clause at 52.236-14?
The contract duration
The available utilities in the contract
The contract amount
The contractor's qualifications
In which type of contract is the clause at 52.236-15, Schedules for Construction Contracts, typically inserted?
Cost-reimbursement construction contract
Fixed-price construction contract
Time and materials contract
Indefinite delivery contract
What is the purpose of inserting the clause at 52.236-16, Quantity Surveys, in construction contracts?
To ensure timely completion of the project
To provide unit pricing of items and payment based on quantity surveys
To establish a project timeline
To outline safety regulations
When is the clause at 52.236-17, Layout of Work, used in construction contracts?
When a cost-reimbursement contract is contemplated
When accurate work layout and siting verification are needed
When the project is under budget
When the project is ahead of schedule
Which clause is inserted in contracts for work oversight in cost-reimbursement construction contracts?
52.236-15
52.236-16
52.236-18
52.236-19
What is the clause at 52.236-19 related to in construction contracts?
Schedules for construction contracts
Quantity surveys
Organization and direction of the work
Contracting by negotiation
