WorksheetsFRIDAY WEEKLY EXAM - 2ND & 3RD GR.
Total questions: 127
Worksheet time: 3hrs 38mins
Name
Class
Date
1.
Q1: Assertion (A): RCC structures resist both compression and tension effectively.
Reason (R): Steel bars are provided in RCC to resist compressive stresses.
a)
Both A and R are true and R is the correct explanation of A
b)
Both A and R are true but R is not the correct explanation of A
c)
A is true but R is false
d)
A is false but R is true
2.
Q2: Assertion (A): Plane table surveying is accurate for small areas.
Reason (R): It is based on graphical plotting during the field survey.
a)
Both A and R are true and R is the correct explanation of A
b)
Both A and R are true but R is not the correct explanation of A
c)
A is true but R is false
d)
A is false but R is true
3.
Q3: Assertion (A): Water-cement ratio influences strength of concrete.
Reason (R): A lower w/c ratio increases the workability of concrete.
a)
Both A and R are true and R is the correct explanation of A
b)
Both A and R are true but R is not the correct explanation of A
c)
A is true but R is false
d)
A is false but R is true
4.
Q4: Assertion (A): Bitumen is used in road construction for binding aggregates.
Reason (R): Bitumen increases the permeability of the pavement layer.
a)
Both A and R are true and R is the correct explanation of A
b)
Both A and R are true but R is not the correct explanation of A
c)
A is true but R is false
d)
A is false but R is true
5.
Q5: Assertion (A): Theodolite is used to measure horizontal and vertical angles.
Reason (R): It cannot be used to prolong a straight line.
a)
Both A and R are true and R is the correct explanation of A
b)
Both A and R are true but R is not the correct explanation of A
c)
A is true but R is false
d)
A is false but R is true
6.
Q6: Calculate the area of a triangle with base 6 m and height 4 m.
a)
10 m²
b)
12 m²
c)
14 m²
d)
24 m²
7.
Q7: A concrete beam 230 mm × 450 mm is subjected to a shear force of 90 kN. Find average shear stress.
a)
0.75 MPa
b)
0.87 MPa
c)
0.99 MPa
d)
1.15 MPa
8.
Q8: What is the unit weight of RCC with density 2500 kg/m³ under gravity 9.81 m/s²?
a)
24525 N/m³
b)
25250 N/m³
c)
24500 N/m³
d)
25000 N/m³
9.
Q9: Find the number of modular bricks required for 5 m³ of brickwork.
a)
2500
b)
3000
c)
2750
d)
2650
10.
Q10: If a pipe of diameter 100 mm carries water at 2 m/s, what is discharge?
a)
0.00157 m³/s
b)
0.0157 m³/s
c)
0.157 m³/s
d)
1.57 m³/s
11.
Q11: Assertion (A): Silt removal from canals is essential for maintaining discharge.
Reason (R): Silt increases the flow velocity in lined canals.
a)
Both A and R are true and R is the correct explanation of A
b)
Both A and R are true but R is not the correct explanation of A
c)
A is true but R is false
d)
A is false but R is true
12.
Q12: Assertion (A): A fully saturated soil has a degree of saturation of 100%.
Reason (R): Degree of saturation indicates water content in voids.
a)
Both A and R are true and R is the correct explanation of A
b)
Both A and R are true but R is not the correct explanation of A
c)
A is true but R is false
d)
A is false but R is true
13.
Q13: Assertion (A): Soundness test is performed on cement to check its ability to resist volume change.
Reason (R): Soundness ensures long-term durability.
a)
Both A and R are true and R is the correct explanation of A
b)
Both A and R are true but R is not the correct explanation of A
c)
A is true but R is false
d)
A is false but R is true
14.
Q14: Assertion (A): Damp proof course prevents water ingress through walls.
Reason (R): It also reduces structural vibrations.
a)
Both A and R are true and R is the correct explanation of A
b)
Both A and R are true but R is not the correct explanation of A
c)
A is true but R is false
d)
A is false but R is true
15.
Q15: Assertion (A): A pile foundation is used where soil bearing capacity is low.
Reason (R): Piles transfer load to weak soil strata.
a)
Both A and R are true and R is the correct explanation of A
b)
Both A and R are true but R is not the correct explanation of A
c)
A is true but R is false
d)
A is false but R is true
16.
Q16: Calculate the volume of a cylinder with diameter 1.2 m and height 2 m.
a)
1.13 m³
b)
2.26 m³
c)
3.14 m³
d)
4.52 m³
17.
Q17: Find the weight of a steel bar 12 mm in diameter and 10 m long. (density = 7850 kg/m³)
a)
68 kg
b)
72 kg
c)
88 kg
d)
90 kg
18.
Q18: What is the spacing of stirrups if shear force is 60 kN and allowable shear stress is 0.4 MPa in a 230 mm wide beam?
a)
400 mm
b)
325 mm
c)
250 mm
d)
300 mm
19.
Q19: How many bricks are required for a 1.5 m³ brickwork if 500 bricks are needed per m³?
a)
700
b)
750
c)
800
d)
850
20.
Q20: Determine the length of a curve of radius 100 m subtending an angle of 60°.
a)
104.7 m
b)
94.2 m
c)
60.0 m
d)
72.5 m
21.
Q21: Assertion (A): Proper curing improves the strength of concrete.
Reason (R): Curing increases the rate of hydration.
a)
Both A and R are true and R is the correct explanation of A
b)
Both A and R are true but R is not the correct explanation of A
c)
A is true but R is false
d)
A is false but R is true
22.
Q22: Assertion (A): Contour lines close together indicate steep slopes.
Reason (R): They show equal horizontal distances.
a)
Both A and R are true and R is the correct explanation of A
b)
Both A and R are true but R is not the correct explanation of A
c)
A is true but R is false
d)
A is false but R is true
23.
Q23: Assertion (A): Sewage should not be discharged into drinking water sources.
Reason (R): It contains pathogens that are beneficial to health.
a)
Both A and R are true and R is the correct explanation of A
b)
Both A and R are true but R is not the correct explanation of A
c)
A is true but R is false
d)
A is false but R is true
24.
Q24: Assertion (A): Road rollers are used for compacting subgrade.
Reason (R): Compaction reduces void ratio and increases strength.
a)
Both A and R are true and R is the correct explanation of A
b)
Both A and R are true but R is not the correct explanation of A
c)
A is true but R is false
d)
A is false but R is true
25.
Q25: Assertion (A): A siphon aqueduct carries drainage below a canal.
Reason (R): In this structure, canal passes under the drainage.
a)
Both A and R are true and R is the correct explanation of A
b)
Both A and R are true but R is not the correct explanation of A
c)
A is true but R is false
d)
A is false but R is true
26.
Q26: Find the moment of inertia of a rectangle 200 mm wide and 400 mm deep about its base.
a)
1.07×10⁹ mm⁴
b)
1.14×10⁹ mm⁴
c)
1.33×10⁹ mm⁴
d)
0.93×10⁹ mm⁴
27.
Q27: Calculate the rise of a 3 m long slab having a slope of 1 in 20.
a)
100 mm
b)
125 mm
c)
150 mm
d)
200 mm
28.
Q28: If a circular column has a diameter of 500 mm, what is its cross-sectional area?
a)
0.157 m²
b)
0.196 m²
c)
0.174 m²
d)
0.135 m²
29.
Q29: Determine the weight of 1.5 m³ of PCC with density 2400 kg/m³.
a)
3600 kg
b)
3800 kg
c)
3400 kg
d)
3200 kg
30.
Q30: Find the diagonal of a rectangular plot 60 m × 80 m.
a)
100 m
b)
110 m
c)
120 m
d)
140 m
31.
Q31: Assertion (A): Hydraulic gradient is always positive in natural groundwater flow.
Reason (R): Water moves from higher to lower potential energy.
a)
Both A and R are true and R is the correct explanation of A
b)
Both A and R are true but R is not the correct explanation of A
c)
A is true but R is false
d)
A is false but R is true
32.
Q32: Assertion (A): A cantilever beam has zero moment at the free end.
Reason (R): Maximum bending moment occurs at the fixed support.
a)
Both A and R are true and R is the correct explanation of A
b)
Both A and R are true but R is not the correct explanation of A
c)
A is true but R is false
d)
A is false but R is true
33.
Q33: Assertion (A): Geotextiles are used in road construction for filtration and separation.
Reason (R): They reduce the subgrade bearing capacity.
a)
Both A and R are true and R is the correct explanation of A
b)
Both A and R are true but R is not the correct explanation of A
c)
A is true but R is false
d)
A is false but R is true
34.
Q34: Assertion (A): Rapid sand filters require less area than slow sand filters.
Reason (R): This is due to higher filtration rates.
a)
Both A and R are true and R is the correct explanation of A
b)
Both A and R are true but R is not the correct explanation of A
c)
A is true but R is false
d)
A is false but R is true
35.
Q35: Assertion (A): Proper alignment of tunnels reduces construction cost.
Reason (R): Misalignment causes less ventilation inside tunnels.
a)
Both A and R are true and R is the correct explanation of A
b)
Both A and R are true but R is not the correct explanation of A
c)
A is true but R is false
d)
A is false but R is true
36.
Q36: Calculate the volume of a trapezoidal footing with top area 4 m², bottom area 6 m², and depth 0.5 m.
a)
2.0 m³
b)
2.25 m³
c)
2.5 m³
d)
3.0 m³
37.
Q37: If a water tank has a diameter of 3 m and height of 5 m, what is the storage capacity?
a)
30 m³
b)
35.34 m³
c)
45 m³
d)
50 m³
38.
Q38: Find the spacing between stirrups in a beam if shear force is 80 kN, τ = 0.4 MPa, b = 230 mm.
a)
250 mm
b)
350 mm
c)
200 mm
d)
275 mm
39.
Q39: Calculate total cost of 1.2 m³ of concrete at ₹6500 per m³.
a)
₹7800
b)
₹7200
c)
₹6500
d)
₹6000
40.
Q40: Determine area of steel for a singly reinforced beam if Ast = 0.5% of 300×500 mm section.
a)
750 mm²
b)
600 mm²
c)
650 mm²
d)
700 mm²
41.
Q41: Assertion (A): Well-graded aggregates improve the workability of concrete.
Reason (R): They contain particles of nearly the same size.
a)
Both A and R are true and R is the correct explanation of A
b)
Both A and R are true but R is not the correct explanation of A
c)
A is true but R is false
d)
A is false but R is true
42.
Q42: Assertion (A): Soil bearing capacity depends on type, depth, and water content.
Reason (R): Loose saturated sands have low bearing capacity.
a)
Both A and R are true and R is the correct explanation of A
b)
Both A and R are true but R is not the correct explanation of A
c)
A is true but R is false
d)
A is false but R is true
43.
Q43: Assertion (A): Proper cover in RCC protects steel reinforcement.
Reason (R): It helps in maintaining flexural strength only.
a)
Both A and R are true and R is the correct explanation of A
b)
Both A and R are true but R is not the correct explanation of A
c)
A is true but R is false
d)
A is false but R is true
44.
Q44: Assertion (A): Bridge abutments support the deck at the ends.
Reason (R): They help transfer vehicular loads directly to the piers.
a)
Both A and R are true and R is the correct explanation of A
b)
Both A and R are true but R is not the correct explanation of A
c)
A is true but R is false
d)
A is false but R is true
45.
Q45: Assertion (A): A siphon spillway functions efficiently in high-head dams.
Reason (R): It works based on venturi effect and air removal.
a)
Both A and R are true and R is the correct explanation of A
b)
Both A and R are true but R is not the correct explanation of A
c)
A is true but R is false
d)
A is false but R is true
46.
Q46: Find the perimeter of a rectangular foundation 6 m × 8 m.
a)
26 m
b)
28 m
c)
30 m
d)
32 m
47.
Q47: A staircase has 15 steps, each of rise 150 mm and tread 250 mm. What is total height?
a)
2.25 m
b)
2.0 m
c)
2.5 m
d)
3.0 m
48.
Q48: Calculate the pressure exerted by a 3 m water column. (γ = 9.81 kN/m³)
a)
29.4 kPa
b)
19.6 kPa
c)
39.3 kPa
d)
24.6 kPa
49.
Q49: A steel plate 10 mm thick and 100 mm wide is stressed to 150 MPa. What is the force?
a)
100 kN
b)
150 kN
c)
120 kN
d)
75 kN
50.
Q50: Determine the angle in degrees for a slope of 1 vertical to 1.5 horizontal.
a)
33.7°
b)
45°
c)
56.3°
d)
21.8°
51.
Q51: Assertion (A): Bitumen is used in road construction for flexible pavement.
Reason (R): It provides rigidity to the structure.
a)
Both A and R are true and R is the correct explanation of A
b)
Both A and R are true but R is not the correct explanation of A
c)
A is true but R is false
d)
A is false but R is true
52.
Q52: Assertion (A): Aeration in water treatment helps remove dissolved gases.
Reason (R): It increases CO₂ content in water.
a)
Both A and R are true and R is the correct explanation of A
b)
Both A and R are true but R is not the correct explanation of A
c)
A is true but R is false
d)
A is false but R is true
53.
Q53: Assertion (A): A tie beam is used to connect column footings.
Reason (R): It resists lateral soil pressure.
a)
Both A and R are true and R is the correct explanation of A
b)
Both A and R are true but R is not the correct explanation of A
c)
A is true but R is false
d)
A is false but R is true
54.
Q54: Assertion (A): A septic tank allows anaerobic decomposition.
Reason (R): It is part of a primary treatment system.
a)
Both A and R are true and R is the correct explanation of A
b)
Both A and R are true but R is not the correct explanation of A
c)
A is true but R is false
d)
A is false but R is true
55.
Q55: Assertion (A): The minimum cover in RCC slab is usually 15 mm.
Reason (R): Cover prevents steel from bonding with concrete.
a)
Both A and R are true and R is the correct explanation of A
b)
Both A and R are true but R is not the correct explanation of A
c)
A is true but R is false
d)
A is false but R is true
56.
Q56: Find the area of a circular slab of 5 m diameter.
a)
19.63 m²
b)
20.12 m²
c)
22.50 m²
d)
21.50 m²
57.
Q57: Calculate the number of 20 cm × 10 cm tiles needed to cover a 2 m × 3 m floor.
a)
300
b)
250
c)
275
d)
350
58.
Q58: What is the unit weight of a concrete block of volume 0.2 m³ and weight 500 kg?
a)
2500 kg/m³
b)
2200 kg/m³
c)
2400 kg/m³
d)
2300 kg/m³
59.
Q59: Calculate the density of soil sample with mass 2.5 kg and volume 1.25 × 10⁻³ m³.
a)
2000 kg/m³
b)
2200 kg/m³
c)
1800 kg/m³
d)
2500 kg/m³
60.
Q60: Find the cost of 40 m of fencing wire at ₹45 per meter.
a)
₹1800
b)
₹1600
c)
₹1500
d)
₹2000
61.
Q157: What is the purpose of using slump test in construction?
a)
To improve durability
b)
To determine workability or measurements
c)
To enhance architectural features
d)
To calculate load bearing
62.
Q158: What is the purpose of using TMT bars in construction?
a)
To improve durability
b)
To determine workability or measurements
c)
To enhance architectural features
d)
To calculate load bearing
63.
Q159: What is the purpose of using plane table in construction?
a)
To improve durability
b)
To determine workability or measurements
c)
To enhance architectural features
d)
To calculate load bearing
64.
Q160: What is the purpose of using bar bending schedule in construction?
a)
To improve durability
b)
To determine workability or measurements
c)
To enhance architectural features
d)
To calculate load bearing
65.
Set 1 - Q1: What is the typical use of ('RCC', 'Total Station', 'Masonry', 'Plane Table')[i % 4] in civil engineering?
a)
For structural strength
b)
For precise measurements
c)
For decorative finishes
d)
For testing soil samples
66.
Q251: A rectangular beam of 300 mm width and 600 mm depth is subjected to a shear force of 120 kN. What is the average shear stress?
a)
0.56 MPa
b)
0.67 MPa
c)
0.44 MPa
d)
0.33 MPa
67.
Q219: Assertion (A): Use of RCC increases the structural integrity of buildings.
Reason (R): RCC is weak in tension and strong in compression.
a)
Both A and R are true and R is the correct explanation of A
b)
Both A and R are true but R is not the correct explanation of A
c)
A is true but R is false
d)
A is false but R is true
68.
Q177: In civil engineering, why is Minimum Drainage Slope considered essential?
a)
It enhances overall efficiency
b)
It ensures proper functionality
c)
It assists in monitoring construction
d)
It provides environmental protection
69.
Q178: In civil engineering, why is Pointing vs Plastering considered essential?
a)
It enhances overall efficiency
b)
It ensures proper functionality
c)
It assists in monitoring construction
d)
It provides environmental protection
70.
Q179: In civil engineering, why is Types of Tunnel Supports considered essential?
a)
It enhances overall efficiency
b)
It ensures proper functionality
c)
It assists in monitoring construction
d)
It provides environmental protection
71.
Q180: In civil engineering, why is Check Levelling Purpose considered essential?
a)
It enhances overall efficiency
b)
It ensures proper functionality
c)
It assists in monitoring construction
d)
It provides environmental protection
72.
Q181: In civil engineering, why is Baffle Walls in Sedimentation Tanks considered essential?
a)
It enhances overall efficiency
b)
It ensures proper functionality
c)
It assists in monitoring construction
d)
It provides environmental protection
73.
Q182: In civil engineering, why is Use of Geotextiles in Roads considered essential?
a)
It enhances overall efficiency
b)
It ensures proper functionality
c)
It assists in monitoring construction
d)
It provides environmental protection
74.
Q183: In civil engineering, why is Rocker and Roller Bearings in Bridges considered essential?
a)
It enhances overall efficiency
b)
It ensures proper functionality
c)
It assists in monitoring construction
d)
It provides environmental protection
75.
Q184: In civil engineering, why is IS Code for RCC Detailing considered essential?
a)
It enhances overall efficiency
b)
It ensures proper functionality
c)
It assists in monitoring construction
d)
It provides environmental protection
76.
Q185: In civil engineering, why is Purpose of Benching in Manholes considered essential?
a)
It enhances overall efficiency
b)
It ensures proper functionality
c)
It assists in monitoring construction
d)
It provides environmental protection
77.
Q186: In civil engineering, why is Types of Expansion Joints considered essential?
a)
It enhances overall efficiency
b)
It ensures proper functionality
c)
It assists in monitoring construction
d)
It provides environmental protection
78.
Q187: In civil engineering, why is Plasticity Index in Soil considered essential?
a)
It enhances overall efficiency
b)
It ensures proper functionality
c)
It assists in monitoring construction
d)
It provides environmental protection
79.
Q188: In civil engineering, why is N-value in Soil Testing considered essential?
a)
It enhances overall efficiency
b)
It ensures proper functionality
c)
It assists in monitoring construction
d)
It provides environmental protection
80.
Q189: In civil engineering, why is Toe Wall in Retaining Structures considered essential?
a)
It enhances overall efficiency
b)
It ensures proper functionality
c)
It assists in monitoring construction
d)
It provides environmental protection
81.
Q190: In civil engineering, why is Grade of Concrete for Footings considered essential?
a)
It enhances overall efficiency
b)
It ensures proper functionality
c)
It assists in monitoring construction
d)
It provides environmental protection
82.
Q191: In civil engineering, why is Well Graded Aggregates considered essential?
a)
It enhances overall efficiency
b)
It ensures proper functionality
c)
It assists in monitoring construction
d)
It provides environmental protection
83.
Q117: What is the importance of IS Code for Earthquake Design in civil engineering projects?
a)
Ensures economic use of space
b)
Improves long-term durability
c)
Enables safe construction practices
d)
Controls structural deformation
84.
Q118: What is the importance of Self Weight of RCC Elements in civil engineering projects?
a)
Ensures economic use of space
b)
Improves long-term durability
c)
Enables safe construction practices
d)
Controls structural deformation
85.
Q119: What is the importance of Curing Methods for Concrete in civil engineering projects?
a)
Ensures economic use of space
b)
Improves long-term durability
c)
Enables safe construction practices
d)
Controls structural deformation
86.
Q120: What is the importance of Negative Reinforcement in Cantilevers in civil engineering projects?
a)
Ensures economic use of space
b)
Improves long-term durability
c)
Enables safe construction practices
d)
Controls structural deformation
87.
Q121: What is the importance of Use of Float in CPM in civil engineering projects?
a)
Ensures economic use of space
b)
Improves long-term durability
c)
Enables safe construction practices
d)
Controls structural deformation
88.
Q122: What is the importance of Manhole Components in civil engineering projects?
a)
Ensures economic use of space
b)
Improves long-term durability
c)
Enables safe construction practices
d)
Controls structural deformation
89.
Q123: What is the importance of Standard Room Sizes in Residential Planning in civil engineering projects?
a)
Ensures economic use of space
b)
Improves long-term durability
c)
Enables safe construction practices
d)
Controls structural deformation
90.
Q124: What is the importance of Settlement of Foundations in civil engineering projects?
a)
Ensures economic use of space
b)
Improves long-term durability
c)
Enables safe construction practices
d)
Controls structural deformation
91.
Q125: What is the importance of Hydraulic Gradient Line in civil engineering projects?
a)
Ensures economic use of space
b)
Improves long-term durability
c)
Enables safe construction practices
d)
Controls structural deformation
92.
Q126: What is the importance of Arch Action in Masonry in civil engineering projects?
a)
Ensures economic use of space
b)
Improves long-term durability
c)
Enables safe construction practices
d)
Controls structural deformation
93.
Q127: What is the importance of Pile Cap Function in civil engineering projects?
a)
Ensures economic use of space
b)
Improves long-term durability
c)
Enables safe construction practices
d)
Controls structural deformation
94.
Q128: What is the importance of Soil Compaction Curve in civil engineering projects?
a)
Ensures economic use of space
b)
Improves long-term durability
c)
Enables safe construction practices
d)
Controls structural deformation
95.
Q129: What is the importance of Minimum Width of Septic Tank in civil engineering projects?
a)
Ensures economic use of space
b)
Improves long-term durability
c)
Enables safe construction practices
d)
Controls structural deformation
96.
Q130: What is the importance of Baffle Walls in Treatment Plant in civil engineering projects?
a)
Ensures economic use of space
b)
Improves long-term durability
c)
Enables safe construction practices
d)
Controls structural deformation
97.
Q131: What is the importance of Role of Dowel Bars in Pavement in civil engineering projects?
a)
Ensures economic use of space
b)
Improves long-term durability
c)
Enables safe construction practices
d)
Controls structural deformation
98.
Q72: In what context is Bending Moment Diagram used in civil engineering practice?
a)
To achieve structural aesthetics
b)
To satisfy IS code provisions
c)
To ensure long-term durability
d)
To perform efficient design analysis
99.
Q73: In what context is Lapping Length of Bars used in civil engineering practice?
a)
To achieve structural aesthetics
b)
To satisfy IS code provisions
c)
To ensure long-term durability
d)
To perform efficient design analysis
100.
Q74: In what context is Tacheometric Surveying used in civil engineering practice?
a)
To achieve structural aesthetics
b)
To satisfy IS code provisions
c)
To ensure long-term durability
d)
To perform efficient design analysis
101.
Q75: In what context is Standard Consistency of Cement used in civil engineering practice?
a)
To achieve structural aesthetics
b)
To satisfy IS code provisions
c)
To ensure long-term durability
d)
To perform efficient design analysis
102.
Q76: In what context is Haunch Bars in Slabs used in civil engineering practice?
a)
To achieve structural aesthetics
b)
To satisfy IS code provisions
c)
To ensure long-term durability
d)
To perform efficient design analysis
103.
Q77: In what context is PCC Mix Ratios used in civil engineering practice?
a)
To achieve structural aesthetics
b)
To satisfy IS code provisions
c)
To ensure long-term durability
d)
To perform efficient design analysis
104.
Q78: In what context is Types of Footings used in civil engineering practice?
a)
To achieve structural aesthetics
b)
To satisfy IS code provisions
c)
To ensure long-term durability
d)
To perform efficient design analysis
105.
Q79: In what context is Deflection in RCC Beams used in civil engineering practice?
a)
To achieve structural aesthetics
b)
To satisfy IS code provisions
c)
To ensure long-term durability
d)
To perform efficient design analysis
106.
Q80: In what context is One-Way Slab Behavior used in civil engineering practice?
a)
To achieve structural aesthetics
b)
To satisfy IS code provisions
c)
To ensure long-term durability
d)
To perform efficient design analysis
107.
Q81: In what context is Bridge Site Selection used in civil engineering practice?
a)
To achieve structural aesthetics
b)
To satisfy IS code provisions
c)
To ensure long-term durability
d)
To perform efficient design analysis
108.
Q82: In what context is Minimum Cover in RCC Columns used in civil engineering practice?
a)
To achieve structural aesthetics
b)
To satisfy IS code provisions
c)
To ensure long-term durability
d)
To perform efficient design analysis
109.
Q83: In what context is Ballast Functions used in civil engineering practice?
a)
To achieve structural aesthetics
b)
To satisfy IS code provisions
c)
To ensure long-term durability
d)
To perform efficient design analysis
110.
Q84: In what context is Splay in Openings used in civil engineering practice?
a)
To achieve structural aesthetics
b)
To satisfy IS code provisions
c)
To ensure long-term durability
d)
To perform efficient design analysis
111.
Q85: In what context is Spur and Weir Difference used in civil engineering practice?
a)
To achieve structural aesthetics
b)
To satisfy IS code provisions
c)
To ensure long-term durability
d)
To perform efficient design analysis
112.
Q86: In what context is Pile Driving Equipment used in civil engineering practice?
a)
To achieve structural aesthetics
b)
To satisfy IS code provisions
c)
To ensure long-term durability
d)
To perform efficient design analysis
113.
Q27: Which of the following best describes the role of Creep in Rails in civil engineering?
a)
To determine load factors
b)
To improve construction sequence
c)
To ensure structural or functional efficiency
d)
To assist with surveying or measurements
114.
Q28: Which of the following best describes the role of Types of Sewer Appurtenances in civil engineering?
a)
To determine load factors
b)
To improve construction sequence
c)
To ensure structural or functional efficiency
d)
To assist with surveying or measurements
115.
Q29: Which of the following best describes the role of IS 456 Concrete Code in civil engineering?
a)
To determine load factors
b)
To improve construction sequence
c)
To ensure structural or functional efficiency
d)
To assist with surveying or measurements
116.
Q30: Which of the following best describes the role of Composite Masonry in civil engineering?
a)
To determine load factors
b)
To improve construction sequence
c)
To ensure structural or functional efficiency
d)
To assist with surveying or measurements
117.
Q31: Which of the following best describes the role of Tacheometry in civil engineering?
a)
To determine load factors
b)
To improve construction sequence
c)
To ensure structural or functional efficiency
d)
To assist with surveying or measurements
118.
Q32: Which of the following best describes the role of Fly Levelling in civil engineering?
a)
To determine load factors
b)
To improve construction sequence
c)
To ensure structural or functional efficiency
d)
To assist with surveying or measurements
119.
Q33: Which of the following best describes the role of Sieve Analysis in civil engineering?
a)
To determine load factors
b)
To improve construction sequence
c)
To ensure structural or functional efficiency
d)
To assist with surveying or measurements
120.
Q34: Which of the following best describes the role of Moment of Inertia in civil engineering?
a)
To determine load factors
b)
To improve construction sequence
c)
To ensure structural or functional efficiency
d)
To assist with surveying or measurements
121.
Q35: Which of the following best describes the role of IS 800 for Steel Structures in civil engineering?
a)
To determine load factors
b)
To improve construction sequence
c)
To ensure structural or functional efficiency
d)
To assist with surveying or measurements
122.
Q36: Which of the following best describes the role of Water Treatment Methods in civil engineering?
a)
To determine load factors
b)
To improve construction sequence
c)
To ensure structural or functional efficiency
d)
To assist with surveying or measurements
123.
Q37: Which of the following best describes the role of Roof Truss Types in civil engineering?
a)
To determine load factors
b)
To improve construction sequence
c)
To ensure structural or functional efficiency
d)
To assist with surveying or measurements
124.
Q38: Which of the following best describes the role of Slenderness Ratio in civil engineering?
a)
To determine load factors
b)
To improve construction sequence
c)
To ensure structural or functional efficiency
d)
To assist with surveying or measurements
125.
Q39: Which of the following best describes the role of Plumb Bob in civil engineering?
a)
To determine load factors
b)
To improve construction sequence
c)
To ensure structural or functional efficiency
d)
To assist with surveying or measurements
126.
Q40: Which of the following best describes the role of Pointing in Brickwork in civil engineering?
a)
To determine load factors
b)
To improve construction sequence
c)
To ensure structural or functional efficiency
d)
To assist with surveying or measurements
127.
Q41: Which of the following best describes the role of Bar Chart in CPM in civil engineering?
a)
To determine load factors
b)
To improve construction sequence
c)
To ensure structural or functional efficiency
d)
To assist with surveying or measurements
100 %
